Mbed FW update

Revision:
0:85855ecd3257
Child:
5:0728bde67bdb
diff -r 000000000000 -r 85855ecd3257 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Mon Apr 01 11:09:52 2019 +0000
@@ -0,0 +1,203 @@
+/*
+Copyright 2018 (c) Analog Devices, Inc.
+
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+  - Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+  - Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+  - Neither the name of Analog Devices, Inc. nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+  - The use of this software may or may not infringe the patent rights
+    of one or more patent holders. This license does not release you
+    from the requirement that you obtain separate licenses from these
+    patent holders to use this software.
+  - Use of the software either in source or binary form, must be run
+    on or directly connected to an Analog Devices Inc. component.
+
+THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+Copyright 2017 (c) Analog Devices, Inc.
+
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+  - Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+  - Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+  - Neither the name of Analog Devices, Inc. nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+  - The use of this software may or may not infringe the patent rights
+    of one or more patent holders. This license does not release you
+    from the requirement that you obtain separate licenses from these
+    patent holders to use this software.
+  - Use of the software either in source or binary form, must be run
+    on or directly connected to an Analog Devices Inc. component.
+
+THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+/*!
+ ******************************************************************************
+ * @file:
+ *-----------------------------------------------------------------------------
+ *
+ */
+#include "mbed.h"
+#include "adi_sense_api.h"
+#include "adi_sense_1000/adi_sense_1000_api.h"
+#include "adi_sense_log.h"
+#include "common/utils.h"
+#include "common/platform.h"
+
+extern ADI_SENSE_CONFIG cjc0_thermistor_10k_ntc_config;
+extern ADI_SENSE_CONFIG sensor0_rtd_2w_pt100_config;
+extern ADI_SENSE_CONFIG sensor0_microphone_config;
+extern ADI_SENSE_CONFIG sensor0_diode_2c_config;
+extern ADI_SENSE_CONFIG sensor0_typeK_cjc0_config;
+extern ADI_SENSE_CONFIG sensor1_rtd_3w_pt100_config;
+extern ADI_SENSE_CONFIG sensor1_diode_3c_config;
+extern ADI_SENSE_CONFIG sensor2_typeT_cjc0_config;
+extern ADI_SENSE_CONFIG sensor2_bridge_6w_pressure_config;
+extern ADI_SENSE_CONFIG sensor3_typeJ_cjc0_config;
+extern ADI_SENSE_CONFIG sensor3_thermistor_10k_ntc_config;
+extern ADI_SENSE_CONFIG voltage_honeywellPressure_config;
+extern ADI_SENSE_CONFIG current_honeywellPressure_config;
+extern ADI_SENSE_CONFIG i2c0_honeywellHumidicon_config;
+extern ADI_SENSE_CONFIG i2c0_sensirionSHT3X_config;
+extern ADI_SENSE_CONFIG i2c0_onsemiNOA1305_config;
+extern ADI_SENSE_CONFIG spi0_honeywellTrustability_config;
+extern ADI_SENSE_CONFIG spi0_adiAdxl362_config;
+extern ADI_SENSE_CONFIG spi0_adiAdxl355_config;
+extern ADI_SENSE_CONFIG uart_cozirCO2_config;
+extern ADI_SENSE_CONFIG multichannel_continuous_config;
+extern ADI_SENSE_CONFIG multichannel_multicycle_config;
+extern ADI_SENSE_CONFIG multichannel_singlecycle_config;
+
+/* Change the following pointer to select any of the configurations above */
+static ADI_SENSE_CONFIG *pSelectedConfig = &sensor0_typeK_cjc0_config;
+
+static ADI_SENSE_CONNECTION connectionInfo = PLATFORM_CONNECTION_INFO;
+
+int main()
+{
+    ADI_SENSE_RESULT res;
+    ADI_SENSE_STATUS status;
+    ADI_SENSE_DEVICE_HANDLE hDevice;
+    ADI_SENSE_MEASUREMENT_MODE eMeasurementMode = ADI_SENSE_MEASUREMENT_MODE_NORMAL;
+    bool bDeviceReady;
+
+    /*
+     * Open an ADI Sense device instance.
+     */
+    res = adi_sense_Open(0, &connectionInfo, &hDevice);
+    if (res != ADI_SENSE_SUCCESS)
+    {
+        ADI_SENSE_LOG_ERROR("Failed to open device instance");
+        return res;
+    }
+
+    /*
+     * Reset the given ADI Sense device....
+     */
+    ADI_SENSE_LOG_INFO("Resetting ADI Sense device, please wait...");
+    res = adi_sense_Reset(hDevice);
+    if (res != ADI_SENSE_SUCCESS)
+    {
+        ADI_SENSE_LOG_ERROR("Failed to reset device");
+        return res;
+    }
+    /*
+     * ...and wait until the device is ready.
+     */
+    do {
+        wait_ms(100);
+        res = adi_sense_GetDeviceReadyState(hDevice, &bDeviceReady);
+        if (res != ADI_SENSE_SUCCESS)
+        {
+            ADI_SENSE_LOG_ERROR("Failed to get device ready-state");
+            return res;
+        }
+    } while (! bDeviceReady);
+    ADI_SENSE_LOG_INFO("ADI Sense device ready");
+
+    /*
+     * Write configuration settings to the device registers.
+     * Settings are not applied until adi_sense_ApplyConfigUpdates() is called.
+     */
+    ADI_SENSE_LOG_INFO("Setting device configuration");
+    res = adi_sense_SetConfig(hDevice, pSelectedConfig);
+    if (res != ADI_SENSE_SUCCESS)
+    {
+        ADI_SENSE_LOG_ERROR("Failed to set device configuration");
+        return res;
+    }
+    res = adi_sense_ApplyConfigUpdates(hDevice);
+    if (res != ADI_SENSE_SUCCESS)
+    {
+        ADI_SENSE_LOG_ERROR("Failed to apply device configuration");
+        return res;
+    }
+    /*
+     * Check device status after updating the configuration
+     */
+    res = adi_sense_GetStatus(hDevice, &status);
+    if (res != ADI_SENSE_SUCCESS)
+    {
+        ADI_SENSE_LOG_ERROR("Failed to retrieve device status");
+        return res;
+    }
+    if (status.deviceStatus &
+        (ADI_SENSE_DEVICE_STATUS_ERROR | ADI_SENSE_DEVICE_STATUS_ALERT))
+    {
+        utils_printStatus(&status);
+    }
+
+    /*
+     * Kick off the measurement cycle here
+     */
+    ADI_SENSE_LOG_INFO("Configuration completed, starting measurement cycles");
+    utils_runMeasurement(hDevice, eMeasurementMode);
+
+    /*
+     * Clean up and exit
+     */
+    res = adi_sense_Close(hDevice);
+    if (res != ADI_SENSE_SUCCESS)
+    {
+        ADI_SENSE_LOG_ERROR("Failed to close device instance");
+        return res;
+    }
+
+    return 0;
+}
+