Vybhav Kadaba
Mbed FW update
Diff: src/admw_1001.c
- Revision:
- 41:df78b7d7b675
- Parent:
- 36:54e2418e7620
- Child:
- 42:c9c5a22e539e
--- a/src/admw_1001.c Thu Nov 21 13:37:24 2019 +0000
+++ b/src/admw_1001.c Tue Dec 10 08:43:37 2019 +0000
@@ -903,11 +903,14 @@
ADMW_CORE_Mode_t modeReg;
READ_REG_U8(hDevice, modeReg.VALUE8, CORE_MODE);
- if (eMeasurementMode == (modeReg.Conversion_Mode == CORE_MODE_SINGLECYCLE))
- *peOperatingMode = ADMW1001_OPERATING_MODE_SINGLECYCLE;
- else
- *peOperatingMode = ADMW1001_OPERATING_MODE_CONTINUOUS;
+ if(eMeasurementMode==ADMW_MEASUREMENT_MODE_NORMAL) {
+ if (modeReg.Conversion_Mode == CORE_MODE_SINGLECYCLE)
+ *peOperatingMode = ADMW1001_OPERATING_MODE_SINGLECYCLE;
+ else
+ *peOperatingMode = ADMW1001_OPERATING_MODE_CONTINUOUS;
+ }
+
if (eMeasurementMode == ADMW_MEASUREMENT_MODE_OMIT_RAW) {
*pnBytesPerSample = 5;
} else {
@@ -926,12 +929,10 @@
READ_REG_U8(hDevice, channelCountReg.VALUE8, CORE_CHANNEL_COUNTn(chId));
READ_REG_U32(hDevice, sensorDetailsReg.VALUE32, CORE_SENSOR_DETAILSn(chId));
- if (channelCountReg.Channel_Enable && !sensorDetailsReg.Do_Not_Publish)
- {
+ if (channelCountReg.Channel_Enable && !sensorDetailsReg.Do_Not_Publish) {
unsigned nActualChannels = 1;
- if (chId == ADMW1001_CH_ID_DIG_SPI_0)
- {
+ if (chId == ADMW1001_CH_ID_DIG_SPI_0) {
/* Some sensors automatically generate samples on additional
* "virtual" channels so these channels must be counted as
* active when those sensors are selected and we use the count
@@ -943,12 +944,11 @@
ADMW_CORE_Sensor_Type_t sensorTypeReg;
READ_REG_U16(hDevice, sensorTypeReg.VALUE16, CORE_SENSOR_TYPEn(chId));
-
+
if ((sensorTypeReg.Sensor_Type >=
- CORE_SENSOR_TYPE_SPI_ACCELEROMETER_A) &&
- (sensorTypeReg.Sensor_Type <=
- CORE_SENSOR_TYPE_SPI_ACCELEROMETER_B))
- {
+ CORE_SENSOR_TYPE_SPI_ACCELEROMETER_A) &&
+ (sensorTypeReg.Sensor_Type <=
+ CORE_SENSOR_TYPE_SPI_ACCELEROMETER_B)) {
nActualChannels += 2;
}
#endif
@@ -1038,13 +1038,13 @@
ADMW_DEVICE_HANDLE hDevice,
float32_t RSenseValue)
{
- ADMW_CORE_External_Reference_Resistor_t RefResistorConfigReg;
-
- RefResistorConfigReg.Ext_Refin1_Value = RSenseValue;
-
- WRITE_REG_FLOAT(hDevice, RefResistorConfigReg.VALUE32, CORE_EXTERNAL_REFERENCE_RESISTOR);
-
- return ADMW_SUCCESS;
+ ADMW_CORE_External_Reference_Resistor_t RefResistorConfigReg;
+
+ RefResistorConfigReg.Ext_Refin1_Value = RSenseValue;
+
+ WRITE_REG_FLOAT(hDevice, RefResistorConfigReg.VALUE32, CORE_EXTERNAL_REFERENCE_RESISTOR);
+
+ return ADMW_SUCCESS;
}
static ADMW_RESULT admw_SetMode(
@@ -1156,19 +1156,17 @@
}
eRet = admw_SetRSenseValue(hDevice, pMeasConfig->RSenseValue);
- if (eRet != ADMW_SUCCESS)
- {
+ if (eRet != ADMW_SUCCESS) {
ADMW_LOG_ERROR("Failed to set RSenseValue");
return eRet;
}
-
+
eRet = admw_SetExternalReferenceVoltage(hDevice, pMeasConfig->externalRefVoltage);
- if (eRet != ADMW_SUCCESS)
- {
+ if (eRet != ADMW_SUCCESS) {
ADMW_LOG_ERROR("Failed to set External reference Voltage");
return eRet;
- }
-
+ }
+
return ADMW_SUCCESS;
}
@@ -1185,24 +1183,23 @@
else
diagnosticsControlReg.Diag_Meas_En = 1;
- switch (pDiagnosticsConfig->osdFrequency)
- {
- case ADMW1001_OPEN_SENSOR_DIAGNOSTICS_DISABLED:
- diagnosticsControlReg.Diag_OSD_Freq = CORE_DIAGNOSTICS_CONTROL_OCD_OFF;
- break;
- case ADMW1001_OPEN_SENSOR_DIAGNOSTICS_PER_CYCLE:
- diagnosticsControlReg.Diag_OSD_Freq = CORE_DIAGNOSTICS_CONTROL_OCD_PER_1_CYCLE;
- break;
- case ADMW1001_OPEN_SENSOR_DIAGNOSTICS_PER_100_CYCLES:
- diagnosticsControlReg.Diag_OSD_Freq = CORE_DIAGNOSTICS_CONTROL_OCD_PER_10_CYCLES;
- break;
- case ADMW1001_OPEN_SENSOR_DIAGNOSTICS_PER_1000_CYCLES:
- diagnosticsControlReg.Diag_OSD_Freq = CORE_DIAGNOSTICS_CONTROL_OCD_PER_100_CYCLES;
- break;
- default:
- ADMW_LOG_ERROR("Invalid open-sensor diagnostic frequency %d specified",
- pDiagnosticsConfig->osdFrequency);
- return ADMW_INVALID_PARAM;
+ switch (pDiagnosticsConfig->osdFrequency) {
+ case ADMW1001_OPEN_SENSOR_DIAGNOSTICS_DISABLED:
+ diagnosticsControlReg.Diag_OSD_Freq = CORE_DIAGNOSTICS_CONTROL_OCD_OFF;
+ break;
+ case ADMW1001_OPEN_SENSOR_DIAGNOSTICS_PER_CYCLE:
+ diagnosticsControlReg.Diag_OSD_Freq = CORE_DIAGNOSTICS_CONTROL_OCD_PER_1_CYCLE;
+ break;
+ case ADMW1001_OPEN_SENSOR_DIAGNOSTICS_PER_100_CYCLES:
+ diagnosticsControlReg.Diag_OSD_Freq = CORE_DIAGNOSTICS_CONTROL_OCD_PER_10_CYCLES;
+ break;
+ case ADMW1001_OPEN_SENSOR_DIAGNOSTICS_PER_1000_CYCLES:
+ diagnosticsControlReg.Diag_OSD_Freq = CORE_DIAGNOSTICS_CONTROL_OCD_PER_100_CYCLES;
+ break;
+ default:
+ ADMW_LOG_ERROR("Invalid open-sensor diagnostic frequency %d specified",
+ pDiagnosticsConfig->osdFrequency);
+ return ADMW_INVALID_PARAM;
}
WRITE_REG_U8(hDevice, diagnosticsControlReg.VALUE8, CORE_DIAGNOSTICS_CONTROL);
@@ -1323,8 +1320,7 @@
case ADMW1001_ADC_SENSOR_SINGLE_ENDED_RATIO:
case ADMW1001_ADC_SENSOR_DIFFERENTIAL_RATIO:
if (! (ADMW1001_CHANNEL_IS_ADC_SENSOR(eChannelId) ||
- ADMW1001_CHANNEL_IS_ADC_CJC(eChannelId) || ADMW1001_CHANNEL_IS_ADC(eChannelId) ))
- {
+ ADMW1001_CHANNEL_IS_ADC_CJC(eChannelId) || ADMW1001_CHANNEL_IS_ADC(eChannelId) )) {
ADMW_LOG_ERROR(
"Invalid ADC sensor type %d specified for channel %d",
sensorType, eChannelId);
@@ -1518,7 +1514,7 @@
MeasSetupReg.VALUE32 = REG_RESET_VAL(CORE_MEASUREMENT_SETUPn);
MeasSetupReg.PST_MEAS_EXC_CTRL = pAdcChannelConfig->current.excitationState;
MeasSetupReg.Buffer_Bypass = pAdcChannelConfig->bufferBypass;
-
+
if (pFilterConfig->type == ADMW1001_ADC_FILTER_SINC4) {
MeasSetupReg.ADC_Filter_Type = CORE_MEASUREMENT_SETUP_ENABLE_SINC4;
MeasSetupReg.ADC_SF = pFilterConfig->sf;
@@ -1617,7 +1613,7 @@
}
eRet = admw_SetChannelAdcMeasurementSetup(hDevice, eChannelId,
- pAdcChannelConfig);
+ pAdcChannelConfig);
if (eRet != ADMW_SUCCESS) {
ADMW_LOG_ERROR("Failed to set ADC filter for channel %d",
eChannelId);
@@ -2266,8 +2262,7 @@
}
eRet = admw1001_SetDiagnosticsConfig(hDevice, &pDeviceConfig->diagnostics);
- if (eRet)
- {
+ if (eRet) {
ADMW_LOG_ERROR("Failed to set diagnostics configuration");
return eRet;
}