Vybhav Kadaba
Removed unwanted enums and unused functions
Diff: common/utils.c
- Revision:
- 23:bb685f35b08b
- Parent:
- 15:b5d57daeb7c0
- Child:
- 32:52445bef314d
--- a/common/utils.c Thu Sep 26 05:56:58 2019 +0000
+++ b/common/utils.c Thu Sep 26 06:15:39 2019 +0000
@@ -49,12 +49,9 @@
{
ADMW_LOG_INFO("Status Summary:");
- if (pStatus->deviceStatus == 0)
- {
+ if (pStatus->deviceStatus == 0) {
ADMW_LOG_INFO("\tNo errors detected");
- }
- else
- {
+ } else {
if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_BUSY)
ADMW_LOG_INFO("\tCommand running");
if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_DATAREADY)
@@ -67,27 +64,23 @@
ADMW_LOG_INFO("\tActive Configuration Errors - ATTENTION REQUIRED");
if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_LUT_ERROR)
ADMW_LOG_INFO("\tActive Look-Up Table Errors - ATTENTION REQUIRED");
-
+
- if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ERROR)
- {
+ if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ERROR) {
ADMW_LOG_INFO("\tActive Errors - ATTENTION REQUIRED");
ADMW_LOG_INFO("\t\tLast Error Code: %u (0x%X)",
- pStatus->errorCode, pStatus->errorCode);
+ pStatus->errorCode, pStatus->errorCode);
- if (pStatus->diagnosticsStatus == 0)
- {
+ if (pStatus->diagnosticsStatus == 0) {
ADMW_LOG_INFO("\t\tNo diagnostics faults detected");
- }
- else
- {
+ } else {
ADMW_LOG_INFO("\t\tActive diagnostics faults:");
if (pStatus->diagnosticsStatus & ADMW_DIAGNOSTICS_STATUS_CHECKSUM_ERROR)
ADMW_LOG_INFO("\t\t\tInternal Checksum fault detected");
-
-
-
+
+
+
if (pStatus->diagnosticsStatus & ADMW_DIAGNOSTICS_STATUS_CONVERSION_ERROR)
ADMW_LOG_INFO("\t\t\tInternal ADC Conversions fault detected");
if (pStatus->diagnosticsStatus & ADMW_DIAGNOSTICS_STATUS_CALIBRATION_ERROR)
@@ -95,21 +88,19 @@
}
}
- if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ALERT)
- {
+ if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ALERT) {
ADMW_LOG_INFO("\tActive Alerts - ATTENTION REQUIRED:");
ADMW_LOG_INFO("\t\tLast Alert Code: %u (0x%X)",
- pStatus->alertCode, pStatus->alertCode);
+ pStatus->alertCode, pStatus->alertCode);
- for (unsigned i = 0; i < ADMW1001_MAX_CHANNELS; i++)
- {
+ for (unsigned i = 0; i < ADMW1001_MAX_CHANNELS; i++) {
if (pStatus->channelAlerts[i] == 0)
continue;
ADMW_LOG_INFO("\t\tChannel #%u:", i);
ADMW_LOG_INFO("\t\t\tLast Alert Code: %u (0x%X)",
- pStatus->channelAlertCodes[i],
- pStatus->channelAlertCodes[i]);
+ pStatus->channelAlertCodes[i],
+ pStatus->channelAlertCodes[i]);
if (pStatus->channelAlerts[i] & ADMW_CHANNEL_ALERT_TIMEOUT)
ADMW_LOG_INFO("\t\t\tTimeout alert detected");
if (pStatus->channelAlerts[i] & ADMW_CHANNEL_ALERT_UNDER_RANGE)
@@ -140,11 +131,10 @@
}
if ((pStatus->deviceStatus & ADMW_DEVICE_STATUS_ERROR) ||
- (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ALERT))
- {
+ (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ALERT)) {
ADMW_LOG_INFO("\t\tLast Debug Code: %u-%u",
- (pStatus->debugCode >> 16) & 0xFFFF,
- (pStatus->debugCode >> 0) & 0xFFFF);
+ (pStatus->debugCode >> 16) & 0xFFFF,
+ (pStatus->debugCode >> 0) & 0xFFFF);
}
}
}
@@ -154,16 +144,15 @@
uint32_t nNumSamples,
ADMW_MEASUREMENT_MODE eMeasurementMode)
{
-
- for (uint32_t i = 0; i < nNumSamples; i++)
- {
- ADMW_LOG_INFO("Sample # %2d Channel # %2d :: Raw %0X %f :: Processed %f :: flags:%s%s",
- i+1,
- pSampleBuffer[i].channelId,
- pSampleBuffer[i].rawValue, (pSampleBuffer[i].rawValue/1024.0),
- pSampleBuffer[i].processedValue,
- pSampleBuffer[i].status & ADMW_DEVICE_STATUS_ERROR ? " ERROR" : "",
- pSampleBuffer[i].status & ADMW_DEVICE_STATUS_ALERT ? " ALERT" : "");
+
+ for (uint32_t i = 0; i < nNumSamples; i++) {
+ ADMW_LOG_INFO("Sample # %2d Channel # %2d :: Raw %0X %f :: Processed %f :: flags:%s%s",
+ i+1,
+ pSampleBuffer[i].channelId,
+ pSampleBuffer[i].rawValue, (pSampleBuffer[i].rawValue/1024.0),
+ pSampleBuffer[i].processedValue,
+ pSampleBuffer[i].status & ADMW_DEVICE_STATUS_ERROR ? " ERROR" : "",
+ pSampleBuffer[i].status & ADMW_DEVICE_STATUS_ALERT ? " ALERT" : "");
}
}
@@ -183,28 +172,24 @@
bool state;
res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_DATAREADY,
- gpioCallbackFn, (void *)pbDataReady);
- if (res != ADMW_SUCCESS)
- {
+ gpioCallbackFn, (void *)pbDataReady);
+ if (res != ADMW_SUCCESS) {
ADMW_LOG_ERROR("Failed to register DATAREADY callback");
return res;
}
res = admw_GetGpioState(hDevice, ADMW_GPIO_PIN_ALERT_ERROR, &state);
- if (res != ADMW_SUCCESS)
- {
+ if (res != ADMW_SUCCESS) {
ADMW_LOG_ERROR("Failed to get current ERROR state");
return res;
}
- if (state)
- {
+ if (state) {
ADMW_LOG_ERROR("ERROR signal already asserted");
return ADMW_FAILURE;
}
res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_ALERT_ERROR,
- gpioCallbackFn, (void *)pbError);
- if (res != ADMW_SUCCESS)
- {
+ gpioCallbackFn, (void *)pbError);
+ if (res != ADMW_SUCCESS) {
ADMW_LOG_ERROR("Failed to register ERROR callback");
return res;
}
@@ -221,9 +206,8 @@
return ADMW_FAILURE;
}*/
res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_ALERT_ERROR,
- gpioCallbackFn, (void *)pbAlert);
- if (res != ADMW_SUCCESS)
- {
+ gpioCallbackFn, (void *)pbAlert);
+ if (res != ADMW_SUCCESS) {
ADMW_LOG_ERROR("Failed to register ALERT callback");
return res;
}
@@ -237,25 +221,22 @@
ADMW_RESULT res;
res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_DATAREADY,
- NULL, NULL);
- if (res != ADMW_SUCCESS)
- {
+ NULL, NULL);
+ if (res != ADMW_SUCCESS) {
ADMW_LOG_ERROR("Failed to deregister DATAREADY callback");
return res;
}
res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_ALERT_ERROR,
- NULL, NULL);
- if (res != ADMW_SUCCESS)
- {
+ NULL, NULL);
+ if (res != ADMW_SUCCESS) {
ADMW_LOG_ERROR("Failed to deregister ERROR callback");
return res;
}
res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_ALERT_ERROR,
- NULL, NULL);
- if (res != ADMW_SUCCESS)
- {
+ NULL, NULL);
+ if (res != ADMW_SUCCESS) {
ADMW_LOG_INFO("Failed to deregister ALERT callback");
return res;
}
@@ -286,12 +267,12 @@
uint32_t nSamplesPerCycle;
uint8_t nBytesPerSample;
res = admw1001_GetDataReadyModeInfo(hDevice,
- eMeasurementMode,
- &eOperatingMode,
- &eDataReadyMode,
- &nSamplesPerDataready,
- &nSamplesPerCycle,
- &nBytesPerSample);
+ eMeasurementMode,
+ &eOperatingMode,
+ &eDataReadyMode,
+ &nSamplesPerDataready,
+ &nSamplesPerCycle,
+ &nBytesPerSample);
if (res != ADMW_SUCCESS)
return res;
@@ -301,8 +282,7 @@
ADMW_DATA_SAMPLE *pSampleBuffer;
pSampleBuffer = malloc(sizeof(ADMW_DATA_SAMPLE) *
nSamplesPerDataready);
- if (pSampleBuffer == NULL)
- {
+ if (pSampleBuffer == NULL) {
ADMW_LOG_ERROR("Failed to allocate sample buffer");
return ADMW_NO_MEM;
}
@@ -312,8 +292,7 @@
*/
ADMW_LOG_INFO("Starting measurement");
res = admw_StartMeasurement(hDevice, eMeasurementMode);
- if (res != ADMW_SUCCESS)
- {
+ if (res != ADMW_SUCCESS) {
ADMW_LOG_ERROR("Failed to start measurement");
return res;
}
@@ -323,8 +302,7 @@
*/
uint32_t nSampleCount = 0;
uint32_t nReturned;
- while (true)
- {
+ while (true) {
ADMW_STATUS status;
/*
@@ -334,29 +312,24 @@
while (! (bDataReady || bError))
;
- if (!bError)
- {
+ if (!bError) {
/*
* Get data samples from the measurement cycle, if no error has occurred
*/
bDataReady = false;
res = admw_GetData(hDevice, eMeasurementMode, pSampleBuffer,
- nBytesPerSample, nSamplesPerDataready,
- &nReturned);
- if (res != ADMW_SUCCESS)
- {
- if (res == ADMW_INCOMPLETE)
- {
+ nBytesPerSample, nSamplesPerDataready,
+ &nReturned);
+ if (res != ADMW_SUCCESS) {
+ if (res == ADMW_INCOMPLETE) {
/*
* This is expected in cases where cycleSkipCount may
* be non-zero for some channels, resulting in
* variable-length sequences
*/
ADMW_LOG_DEBUG("Retrieved %u of %u requested data samples",
- nReturned, nSamplesPerDataready);
- }
- else
- {
+ nReturned, nSamplesPerDataready);
+ } else {
ADMW_LOG_WARN("Failed to get data samples from device");
return res;
}
@@ -377,18 +350,15 @@
/*
* Check and print device status if errors/alerts have been triggered
*/
- if (bError || bAlert)
- {
+ if (bError || bAlert) {
res = admw_GetStatus(hDevice, &status);
- if (res != ADMW_SUCCESS)
- {
+ if (res != ADMW_SUCCESS) {
ADMW_LOG_ERROR("Failed to retrieve device status");
return res;
}
if (status.deviceStatus &
- (ADMW_DEVICE_STATUS_ERROR | ADMW_DEVICE_STATUS_ALERT))
- {
+ (ADMW_DEVICE_STATUS_ERROR | ADMW_DEVICE_STATUS_ALERT)) {
utils_printStatus(&status);
/* Break out of the loop if any errors are raised */
@@ -397,8 +367,7 @@
}
}
- if (eOperatingMode == ADMW1001_OPERATING_MODE_SINGLECYCLE)
- {
+ if (eOperatingMode == ADMW1001_OPERATING_MODE_SINGLECYCLE) {
/*
* In this mode, break out of the loop when the measurement command
* has completed.
@@ -414,8 +383,7 @@
*/
bool bCommandRunning;
res = admw_GetCommandRunningState(hDevice, &bCommandRunning);
- if (res != ADMW_SUCCESS)
- {
+ if (res != ADMW_SUCCESS) {
ADMW_LOG_ERROR("Failed to get command-running status");
return res;
}
@@ -427,8 +395,7 @@
ADMW_LOG_INFO("Stopping measurement");
res = admw_StopMeasurement(hDevice);
- if (res != ADMW_SUCCESS)
- {
+ if (res != ADMW_SUCCESS) {
ADMW_LOG_ERROR("Failed to send stop measurement");
return res;
}