Diff: inc/adi_sense_api.h

Revision:

5:0728bde67bdb

Parent:

4:2ca06eee5735

Child:

6:9d393a9677f4

diff -r 2ca06eee5735 -r 0728bde67bdb inc/adi_sense_api.h
--- a/inc/adi_sense_api.h	Tue Jun 04 10:09:11 2019 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,701 +0,0 @@
-/*
-Copyright 2017 (c) Analog Devices, Inc.
-
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-  - Redistributions of source code must retain the above copyright
-    notice, this list of conditions and the following disclaimer.
-  - Redistributions in binary form must reproduce the above copyright
-    notice, this list of conditions and the following disclaimer in
-    the documentation and/or other materials provided with the
-    distribution.
-  - Neither the name of Analog Devices, Inc. nor the names of its
-    contributors may be used to endorse or promote products derived
-    from this software without specific prior written permission.
-  - The use of this software may or may not infringe the patent rights
-    of one or more patent holders. This license does not release you
-    from the requirement that you obtain separate licenses from these
-    patent holders to use this software.
-  - Use of the software either in source or binary form, must be run
-    on or directly connected to an Analog Devices Inc. component.
-
-THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
-IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
-INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-
-/*!
- ******************************************************************************
- * @file:   adi_sense_api.h
- * @brief:  ADISENSE Host Library Application Programming Interface (API)
- *-----------------------------------------------------------------------------
- */
-
-#ifndef __ADI_SENSE_API_H__
-#define __ADI_SENSE_API_H__
-
-#include "inc/adi_sense_types.h"
-#include "inc/adi_sense_config_types.h"
-#include "inc/adi_sense_platform.h"
-#include "inc/adi_sense_gpio.h"
-#include "inc/adi_sense_spi.h"
-#include "inc/adi_sense_log.h"
-#include "inc/adi_sense_time.h"
-
-/*! @defgroup ADISENSE_Api ADISENSE Host Library API
- *  Host library API common to the ADISENSE product family.
- *  @{
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*! The maximum number of channels supported by this API
- * @note Specific ADISENSE products may implement a lower number of channels */
-#define ADI_SENSE_MAX_CHANNELS 16
-
-/*! A handle used in all API functions to identify the ADISENSE device. */
-typedef void* ADI_SENSE_DEVICE_HANDLE;
-
-/*! Supported connection types for communication with the ADISENSE device. */
-typedef enum {
-    ADI_SENSE_CONNECTION_TYPE_SPI = 1,
-    /*!< Serial Peripheral Interface (SPI) connection type */
-} ADI_SENSE_CONNECTION_TYPE;
-
-/*! Connection details for communication with a ADISENSE device instance. */
-typedef struct {
-    ADI_SENSE_CONNECTION_TYPE      type;
-    /*!< Connection type selection */
-    ADI_SENSE_PLATFORM_SPI_CONFIG  spi;
-    /*!< SPI connection parameters, required if SPI connection type is used */
-    ADI_SENSE_PLATFORM_GPIO_CONFIG gpio;
-    /*!< GPIO connection parameters, for device reset and status I/O signals */
-    ADI_SENSE_PLATFORM_LOG_CONFIG  log;
-    /*!< Log interface connection parameters, for display/routing of log messages */
-} ADI_SENSE_CONNECTION;
-
-/*! Bit masks (flags) for the different device status indicators. */
-typedef enum {
-    ADI_SENSE_DEVICE_STATUS_BUSY         = (1 << 0),
-    /*!< Indicates that a command is currently running on the device */
-    ADI_SENSE_DEVICE_STATUS_DATAREADY    = (1 << 1),
-    /*!< Indicates the availability of measurement data for retrieval */
-    ADI_SENSE_DEVICE_STATUS_ERROR        = (1 << 2),
-    /*!< Indicates that an error condition has been detected by the device */
-    ADI_SENSE_DEVICE_STATUS_ALERT        = (1 << 3),
-    /*!< Indicates that an alert condition has been detected by the device */
-    ADI_SENSE_DEVICE_STATUS_FIFO_ERROR   = (1 << 4),
-    /*!< Indicates that a FIFO error condition has been detected by the device */
-    ADI_SENSE_DEVICE_STATUS_CONFIG_ERROR = (1 << 5),
-    /*!< Indicates that a configuration error condition has been detected by the device */
-    ADI_SENSE_DEVICE_STATUS_LUT_ERROR    = (1 << 6),
-    /*!< Indicates that a look-up table error condition has been detected by the device */
-    ADI_SENSE_DEVICE_STATUS_EXT_FLASH_ERROR = (1 << 7),
-    /*!< Indicates that an external flash memory error condition has been detected by the device */
-} ADI_SENSE_DEVICE_STATUS_FLAGS;
-
-/*! Bit masks (flags) for the different diagnostics status indicators. */
-typedef enum {
-    ADI_SENSE_DIAGNOSTICS_STATUS_CHECKSUM_ERROR       = (1 << 0),
-    /*!< Indicates Error on Internal Checksum Calculations */
-    ADI_SENSE_DIAGNOSTICS_STATUS_COMMS_ERROR          = (1 << 1),
-    /*!< Indicates Error on Internal Device Communications */
-    ADI_SENSE_DIAGNOSTICS_STATUS_SUPPLY_MONITOR_ERROR = (1 << 2),
-    /*!< Indicates Low Voltage on Internal Supply Voltages */
-    ADI_SENSE_DIAGNOSTICS_STATUS_SUPPLY_CAP_ERROR     = (1 << 3),
-    /*!< Indicates Fault on Internal Supply Regulator Capacitor */
-    ADI_SENSE_DIAGNOSTICS_STATUS_CONVERSION_ERROR     = (1 << 8),
-    /*!< Indicates Error During Internal ADC Conversions */
-    ADI_SENSE_DIAGNOSTICS_STATUS_CALIBRATION_ERROR    = (1 << 9),
-    /*!< Indicates Error During Internal Device Calibrations */
-} ADI_SENSE_DIAGNOSTICS_STATUS_FLAGS;
-
-/*! Bit masks (flags) for the different channel alert indicators. */
-typedef enum {
-    ADI_SENSE_CHANNEL_ALERT_TIMEOUT          = (1 << 0),
-    /*!< Indicates timeout condition detected on the channel */
-    ADI_SENSE_CHANNEL_ALERT_UNDER_RANGE      = (1 << 1),
-    /*!< Indicates raw sample under valid input range, possibly clamped */
-    ADI_SENSE_CHANNEL_ALERT_OVER_RANGE       = (1 << 2),
-    /*!< Indicates raw sample over valid input range, possibly clamped */
-    ADI_SENSE_CHANNEL_ALERT_LOW_LIMIT        = (1 << 3),
-    /*!< Indicates measurement result was below configured minimum threshold */
-    ADI_SENSE_CHANNEL_ALERT_HIGH_LIMIT       = (1 << 4),
-    /*!< Indicates measurement result was above configured maximum threshold */
-    ADI_SENSE_CHANNEL_ALERT_SENSOR_OPEN      = (1 << 5),
-    /*!< Indicates open circuit or mis-wire condition detected on the channel */
-    ADI_SENSE_CHANNEL_ALERT_REF_DETECT       = (1 << 6),
-    /*!< Indicates reference-detect error condition detected on the channel */
-    ADI_SENSE_CHANNEL_ALERT_CONFIG_ERR       = (1 << 7),
-    /*!< Indicates configuration error condition detected on the channel */
-    ADI_SENSE_CHANNEL_ALERT_LUT_ERR          = (1 << 8),
-    /*!< Indicates look-up table error condition detected on the channel */
-    ADI_SENSE_CHANNEL_ALERT_SENSOR_NOT_READY = (1 << 9),
-    /*!< Indicates digital sensor not-ready error condition detected on the channel */
-    ADI_SENSE_CHANNEL_ALERT_COMP_NOT_READY   = (1 << 10),
-    /*!< Indicates compensation channel not-ready error condition detected on the channel */
-    ADI_SENSE_CHANNEL_ALERT_LUT_UNDER_RANGE  = (1 << 13),
-    /*!< Indicates raw sample was under the available LUT/equation range */
-    ADI_SENSE_CHANNEL_ALERT_LUT_OVER_RANGE   = (1 << 14),
-    /*!< Indicates raw sample was over the available LUT/equation range */
-} ADI_SENSE_CHANNEL_ALERT_FLAGS;
-
-/*! Status details retreived from the ADISENSE device. */
-typedef struct {
-    ADI_SENSE_DEVICE_STATUS_FLAGS      deviceStatus;
-    /*!< General summary status information from the device  */
-    ADI_SENSE_DIAGNOSTICS_STATUS_FLAGS diagnosticsStatus;
-    /*!< Diagnostic error status information from the device  */
-    ADI_SENSE_CHANNEL_ALERT_FLAGS      channelAlerts[ADI_SENSE_MAX_CHANNELS];
-    /*!< Per-channel alert status information from the device  */
-    uint32_t                           errorCode;
-    /*!< Code identifying the last error signalled by the device  */
-    uint32_t                           alertCode;
-    /*!< Code identifying the last alert signalled by the device  */
-    uint32_t                           debugCode;
-    /*!< Supplementary code related to the last error/alert  */
-    uint32_t                           channelAlertCodes[ADI_SENSE_MAX_CHANNELS];
-    /*!< Per-channel code identifying the last alert signalled for each channel */
-} ADI_SENSE_STATUS;
-
-/*! Data sample details retreived from the ADISENSE device. */
-typedef struct {
-    ADI_SENSE_DEVICE_STATUS_FLAGS      status;
-    /*!< Device summary status snapshot when the sample was recorded */
-    uint32_t                           channelId;
-    /*!< The measurement channel from which this sample was obtained */
-    int32_t                            rawValue;
-    /*!< The raw (unprocessed) value obtained directly from the measurement
-     *   channel, if available
-     */
-    float32_t                          processedValue;
-    /*!< The processed value obtained from the measurement channel, as a final
-     *   measurement value, following calibration and linearisation correction,
-     *   and conversion into an appropriate unit of measurement.
-     */
-} ADI_SENSE_DATA_SAMPLE;
-
-/*! Measurement mode options for the ADISENSE device.
- *  @ref adi_sense_StartMeasurement
- */
-typedef enum {
-    ADI_SENSE_MEASUREMENT_MODE_HEALTHCHECK = 1,
-    /*!< In this mode, a special health-check measurement cycle is executed,
-     *   carrying out a single conversion per channel with measurement
-     *   diagnostics enabled, intended for use as a system health check. */
-    ADI_SENSE_MEASUREMENT_MODE_NORMAL,
-    /*!< In this mode, normal measurement cycle(s) are executed and data samples
-     *   are returned with raw measurement values included. */
-    ADI_SENSE_MEASUREMENT_MODE_OMIT_RAW,
-    /*!< In this mode, normal measurement cycle(s) are executed and data samples
-     *   are returned with raw measurement values omitted for efficiency. */
-    ADI_SENSE_MEASUREMENT_MODE_FFT,
-    /*!< In this mode, FFT mode measurement cycle(s) are executed and data
-     *   samples are returned based on FFT-specific configuration parameters. */
-} ADI_SENSE_MEASUREMENT_MODE;
-
-/*! Identifiers for the user configuration slots in persistent memory. */
-typedef enum {
-    ADI_SENSE_FLASH_CONFIG_1,
-    ADI_SENSE_FLASH_CONFIG_2,
-    ADI_SENSE_FLASH_CONFIG_3,
-    ADI_SENSE_FLASH_CONFIG_4,
-} ADI_SENSE_USER_CONFIG_SLOT;
-
-
-/******************************************************************************
- * ADISENSE High-Level API function prototypes
- *****************************************************************************/
-
-/*!
- * @brief Open ADISENSE device handle and set up communication interface.
- *
- * @param[in]  nDeviceIndex    Zero-based index number identifying this device
- *                             instance.  Note that this will be used to
- *                             retrieve a specific device configuration for
- *                             this device (see @ref adi_sense_SetConfig
- *                             and @ref ADI_SENSE_CONFIG)
- * @param[in]  pConnectionInfo Host-specific connection details (e.g. SPI, GPIO)
- * @param[out] phDevice        Pointer to return an ADISENSE device handle
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *         - #ADI_SENSE_NO_MEM  Failed to allocate memory resources.
- *         - #ADI_SENSE_INVALID_DEVICE_NUM Invalid device index specified
- *
- * @details Configure and initialise the Log interface and the SPI/GPIO
- *          communication interface to the ADISense module.
- */
-ADI_SENSE_RESULT adi_sense_Open(
-    unsigned                   const nDeviceIndex,
-    ADI_SENSE_CONNECTION     * const pConnectionInfo,
-    ADI_SENSE_DEVICE_HANDLE  * const phDevice);
-
-/*!
- * @brief Close ADISENSE device context and free resources.
- *
- * @param[in] hDevice ADISENSE device context handle
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- */
-ADI_SENSE_RESULT adi_sense_Close(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice);
-
-/*!
- * @brief Get the current state of the specified GPIO input signal.
- *
- * @param[in]  hDevice    ADISENSE device context handle
- * @param[in]  ePinId     GPIO pin to query
- * @param[out] pbAsserted Pointer to return the state of the status signal GPIO pin
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *         - #ADI_SENSE_INVALID_DEVICE_NUM Invalid GPIO pin specified.
- *
- * @details Sets *pbAsserted to true if the status signal is asserted, or false
- *          otherwise.
- */
-ADI_SENSE_RESULT adi_sense_GetGpioState(
-    ADI_SENSE_DEVICE_HANDLE   const hDevice,
-    ADI_SENSE_GPIO_PIN        const ePinId,
-    bool                  * const pbAsserted);
-
-/*!
- * @brief Register an application-defined callback function for GPIO interrupts
- *
- * @param[in] hDevice          ADISENSE context handle (@ref adi_sense_Open)
- * @param[in] ePinId           GPIO pin on which to enable/disable interrupts
- * @param[in] callbackFunction Function to be called when an interrupt occurs.
- *                             Specify NULL here to disable interrupts.
- * @param[in] pCallbackParam   Optional opaque parameter passed to the callback
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *         - #ADI_SENSE_INVALID_DEVICE_NUM Invalid GPIO pin specified.
- */
-ADI_SENSE_RESULT adi_sense_RegisterGpioCallback(
-    ADI_SENSE_DEVICE_HANDLE          const hDevice,
-    ADI_SENSE_GPIO_PIN               const ePinId,
-    ADI_SENSE_GPIO_CALLBACK          const callbackFunction,
-    void                           * const pCallbackParam);
-
-/*!
- * @brief Trigger a shut down of the device.
- *
- * @param[in] hDevice ADISENSE device context handle
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Instructs the ADISENSE device to initiate a shut down,
- *          typically used to conserve power when the device is not
- *          in use.  The device may be restarted by calling
- *          @ref adi_sense_Reset().  Note that active configuration
- *          settings are not preserved during shutdown and must be
- *          reloaded after the device has become ready again.
- *
- * @note No other command must be running when this is called.
- */
-ADI_SENSE_RESULT adi_sense_Shutdown(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice);
-
-/*!
- * @brief Reset the ADISENSE device.
- *
- * @param[in] hDevice ADISENSE device context handle
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Trigger a hardware-reset of the ADISENSE device.
- *
- * @note The device may require several seconds before it is ready for use
- *       again. @ref adi_sense_GetDeviceReadyState may be used to check if
- *       the device is ready.
- */
-ADI_SENSE_RESULT adi_sense_Reset(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice);
-
-/*!
- * @brief Check if the device is ready, following power-up or a reset.
- *
- * @param[in]  hDevice ADISENSE device context handle
- * @param[out] pbReady Pointer to return true if the device is ready, or false
- *                     otherwise
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details This function attempts to read a fixed-value device register via
- *           the communication interface.
- */
-ADI_SENSE_RESULT adi_sense_GetDeviceReadyState(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice,
-    bool                   * const pbReady);
-
-/*!
- * @brief Obtain the product ID from the device.
- *
- * @param[in]  hDevice    ADISENSE device context handle
- * @param[out] pProductId Pointer to return the product ID value
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Reads the product ID registers on the device and returns the value.
- */
-ADI_SENSE_RESULT adi_sense_GetProductID(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice,
-    ADI_SENSE_PRODUCT_ID     * const pProductId);
-
-/*!
- * @brief Write full configuration settings to the device registers.
- *
- * @param[in]  hDevice ADISENSE device context handle
- * @param[out] pConfig Pointer to the configuration data structure
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Translates configuration details provided into device-specific
- *          register settings and updates device configuration registers.
- *
- * @note Settings are not applied until adi_sense_ApplyConfigUpdates() is called
- */
-ADI_SENSE_RESULT adi_sense_SetConfig(
-    ADI_SENSE_DEVICE_HANDLE   const hDevice,
-    ADI_SENSE_CONFIG        * const pConfig);
-
-/*!
- * @brief Apply the configuration settings currently stored in device registers
- *
- * @param[in] hDevice ADISENSE device context handle
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Instructs the ADISENSE device to reload and apply configuration
- *          from the device configuration registers.  Changes to configuration
- *          registers are ignored by the device until this function is called.
- *
- * @note No other command must be running when this is called.
- */
-ADI_SENSE_RESULT adi_sense_ApplyConfigUpdates(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice);
-
-/*!
- * @brief Store the configuration settings to persistent memory on the device.
- *
- * @param[in] hDevice ADISENSE device context handle
- * @param[in] eSlotId User configuration slot in persistent memory
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Instructs the ADISENSE device to save the current contents of its
- *          device configuration registers to non-volatile memory.
- *
- * @note No other command must be running when this is called.
- * @note Do not power down the device while this command is running.
- */
-ADI_SENSE_RESULT adi_sense_SaveConfig(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice,
-    ADI_SENSE_USER_CONFIG_SLOT const eSlotId);
-
-/*!
- * @brief Restore configuration settings from persistent memory on the device.
- *
- * @param[in] hDevice ADISENSE device context handle
- * @param[in] eSlotId User configuration slot in persistent memory
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Instructs the ADISENSE device to restore the contents of its
- *          device configuration registers from non-volatile memory.
- *
- * @note No other command must be running when this is called.
- */
-ADI_SENSE_RESULT adi_sense_RestoreConfig(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice,
-    ADI_SENSE_USER_CONFIG_SLOT const eSlotId);
-
-/*!
- * @brief Erases the external flash memory.
- *
- * @param[in] hDevice ADISENSE device context handle
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Sends the bulk erase instruction to the external flash
- *          device. All stored samples are deleted.
- *          It is a blocking operation and takes tens of seconds to
- *          complete.
- *
- * @note No other command must be running when this is called.
- */
-ADI_SENSE_RESULT adi_sense_EraseExternalFlash(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice);
-
-/*!
- * @brief Gets the number of samples stored in the external flash
- *        memory.
- *
- * @param[in] hDevice ADISENSE device context handle
- * @param[in] pSampleCount Address of the return value.
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @note No other command must be running when this is called.
- */
-ADI_SENSE_RESULT adi_sense_GetExternalFlashSampleCount(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice,
-    uint32_t * nSampleCount);
-
-// DEBUG - TO BE DELETED
-ADI_SENSE_RESULT adi_sense_SetExternalFlashIndex(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice,
-    uint32_t nStartIndex);
-
-/*!
- * @brief Read measurement samples stored in the the external flash memory.
- *
- * @param[in]  hDevice          ADISENSE device context handle
- * @param[out] pSamples         Pointer to return a set of requested data
- *                              samples.
- * @param[in]  nStartIndex      Index of first sample to retrieve.
- * @param[in]  nBytesPerSample  The size, in bytes, of each sample.
- * @param[in]  nRequested       Number of requested data samples.
- * @param[out] pnReturned       Number of valid data samples successfully
- *                              retrieved.
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Reads the status registers and extracts the relevant information
- *          to return to the caller.
- *
- */
-ADI_SENSE_RESULT adi_sense_GetExternalFlashData(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice,
-    ADI_SENSE_DATA_SAMPLE    * const pSamples,
-    uint32_t                   const nIndex,
-    uint32_t                   const nRequested,
-    uint32_t                 * const pnReturned);
-
-/*!
- * @brief Store the LUT data to persistent memory on the device.
- *
- * @param[in] hDevice ADISENSE device context handle
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Instructs the ADISENSE device to save the current contents of its
- *          LUT data buffer, set using @ref adi_sense_SetLutData, to
- *          non-volatile memory.
- *
- * @note No other command must be running when this is called.
- * @note Do not power down the device while this command is running.
- */
-ADI_SENSE_RESULT adi_sense_SaveLutData(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice);
-
-/*!
- * @brief Restore LUT data from persistent memory on the device.
- *
- * @param[in] hDevice ADISENSE device context handle
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Instructs the ADISENSE device to restore the contents of its
- *          LUT data, previously stored with @ref adi_sense_SaveLutData, from
- *          non-volatile memory.
- *
- * @note No other command must be running when this is called.
- */
-ADI_SENSE_RESULT adi_sense_RestoreLutData(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice);
-
-/*!
- * @brief Start the measurement cycles on the device.
- *
- * @param[in] hDevice          ADISENSE device context handle
- * @param[in] eMeasurementMode Allows a choice of special modes for the
- *                             measurement.  See @ref ADI_SENSE_MEASUREMENT_MODE
- *                             for further information.
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Instructs the ADISENSE device to start executing measurement cycles
- *          according to the current applied configuration settings.  The
- *          DATAREADY status signal will be asserted whenever new measurement
- *          data is published, according to selected settings.
- *          Measurement cycles may be stopped by calling @ref
- *          adi_sense_StopMeasurement.
- *
- * @note No other command must be running when this is called.
- */
-ADI_SENSE_RESULT adi_sense_StartMeasurement(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice,
-    ADI_SENSE_MEASUREMENT_MODE const eMeasurementMode);
-
-/*!
- * @brief Stop the measurement cycles on the device.
- *
- * @param[in] hDevice ADISENSE device context handle
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Instructs the ADISENSE device to stop executing measurement cycles.
- *          The command may be delayed until the current conversion, if any, has
- *          been completed and published.
- *
- * @note To be used only if a measurement command is currently running.
- */
-ADI_SENSE_RESULT adi_sense_StopMeasurement(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice);
-
-/*!
- * @brief Run built-in diagnostic checks on the device.
- *
- * @param[in] hDevice ADISENSE device context handle
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Instructs the ADISENSE device to execute its built-in diagnostic
- *          tests, on any enabled measurement channels, according to the current
- *          applied configuration settings.  Device status registers will be
- *          updated to indicate if any errors were detected by the diagnostics.
- *
- * @note No other command must be running when this is called.
- */
-ADI_SENSE_RESULT adi_sense_RunDiagnostics(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice);
-
-/*!
- * @brief Run built-in calibration on the device.
- *
- * @param[in] hDevice ADISENSE device context handle
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Instructs the ADISENSE device to execute its self-calibration
- *          routines, on any enabled measurement channels, according to the
- *          current applied configuration settings.  Device status registers
- *          will be updated to indicate if any errors were detected.
- *
- * @note No other command must be running when this is called.
- */
-ADI_SENSE_RESULT adi_sense_RunCalibration(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice);
-
-/*!
- * @brief Run built-in digital calibration on the device.
- *
- * @param[in] hDevice ADISENSE device context handle
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Instructs the ADISENSE device to execute its calibration
- *          routines, on any enabled digital channels, according to the
- *          current applied configuration settings.  Device status registers
- *          will be updated to indicate if any errors were detected.
- *
- * @note No other command must be running when this is called.
- */
-ADI_SENSE_RESULT adi_sense_RunDigitalCalibration(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice);
-
-/*!
- * @brief Read the current status from the device registers.
- *
- * @param[in]  hDevice ADISENSE device context handle
- * @param[out] pStatus Pointer to return the status summary obtained from the
- *                     device.
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Reads the status registers and extracts the relevant information
- *          to return to the caller.
- *
- * @note This may be called at any time, assuming the device is ready.
- */
-ADI_SENSE_RESULT adi_sense_GetStatus(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice,
-    ADI_SENSE_STATUS         * const pStatus);
-
-/*!
- * @brief Read measurement data samples from the device registers.
- *
- * @param[in]  hDevice          ADISENSE device context handle
- * @param[in]  eMeasurementMode Must be set to the same value used for @ref
- *                              adi_sense_StartMeasurement().
- * @param[out] pSamples         Pointer to return a set of requested data samples.
- * @param[in]  nBytesPerSample  The size, in bytes, of each sample.
- * @param[in]  nRequested       Number of requested data samples.
- * @param[out] pnReturned       Number of valid data samples successfully retrieved.
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Reads the status registers and extracts the relevant information
- *          to return to the caller.
- *
- * @note This is intended to be called only when the DATAREADY status signal
- *       is asserted.
- */
-ADI_SENSE_RESULT adi_sense_GetData(
-    ADI_SENSE_DEVICE_HANDLE    const hDevice,
-    ADI_SENSE_MEASUREMENT_MODE const eMeasurementMode,
-    ADI_SENSE_DATA_SAMPLE    * const pSamples,
-    uint8_t                    const nBytesPerSample,
-    uint32_t                   const nRequested,
-    uint32_t                 * const pnReturned);
-
-/*!
- * @brief Check if a command is currently running on the device.
- *
- * @param[in]  hDevice          ADISENSE device context handle
- * @param[out] pbCommandRunning Pointer to return the command running status
- *
- * @return Status
- *         - #ADI_SENSE_SUCCESS Call completed successfully.
- *
- * @details Reads the device status register to check if a command is running.
- */
-ADI_SENSE_RESULT adi_sense_GetCommandRunningState(
-    ADI_SENSE_DEVICE_HANDLE hDevice,
-    bool *pbCommandRunning);
-
-#ifdef __cplusplus
-}
-#endif
-
-/*!
- * @}
- */
-
-#endif /* __ADI_SENSE_API_H__ */
-