Vybhav Kadaba
/
EV-PRO-MW1001_Development_20April
Code clean up and handling FIFO errors
common/utils.c@63:2655a04c00f5, 2020-04-14 (annotated)
- Committer:
- Vkadaba
- Date:
- Tue Apr 14 06:43:47 2020 +0000
- Revision:
- 63:2655a04c00f5
- Parent:
- 56:38b36e947602
- Child:
- 65:d91e1d63153d
Code clean up - part 1 working; ADMW1001_config.h; ADMW1001_lut_data; ADMW1001_sensors_types.h;
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Vkadaba | 15:b5d57daeb7c0 | 1 | /* |
Vkadaba | 15:b5d57daeb7c0 | 2 | Copyright 2019 (c) Analog Devices, Inc. |
Vkadaba | 15:b5d57daeb7c0 | 3 | |
Vkadaba | 15:b5d57daeb7c0 | 4 | All rights reserved. |
Vkadaba | 15:b5d57daeb7c0 | 5 | |
Vkadaba | 15:b5d57daeb7c0 | 6 | Redistribution and use in source and binary forms, with or without |
Vkadaba | 15:b5d57daeb7c0 | 7 | modification, are permitted provided that the following conditions are met: |
Vkadaba | 15:b5d57daeb7c0 | 8 | - Redistributions of source code must retain the above copyright |
Vkadaba | 15:b5d57daeb7c0 | 9 | notice, this list of conditions and the following disclaimer. |
Vkadaba | 15:b5d57daeb7c0 | 10 | - Redistributions in binary form must reproduce the above copyright |
Vkadaba | 15:b5d57daeb7c0 | 11 | notice, this list of conditions and the following disclaimer in |
Vkadaba | 15:b5d57daeb7c0 | 12 | the documentation and/or other materials provided with the |
Vkadaba | 15:b5d57daeb7c0 | 13 | distribution. |
Vkadaba | 15:b5d57daeb7c0 | 14 | - Neither the name of Analog Devices, Inc. nor the names of its |
Vkadaba | 15:b5d57daeb7c0 | 15 | contributors may be used to endorse or promote products derived |
Vkadaba | 15:b5d57daeb7c0 | 16 | from this software without specific prior written permission. |
Vkadaba | 15:b5d57daeb7c0 | 17 | - The use of this software may or may not infringe the patent rights |
Vkadaba | 15:b5d57daeb7c0 | 18 | of one or more patent holders. This license does not release you |
Vkadaba | 15:b5d57daeb7c0 | 19 | from the requirement that you obtain separate licenses from these |
Vkadaba | 15:b5d57daeb7c0 | 20 | patent holders to use this software. |
Vkadaba | 15:b5d57daeb7c0 | 21 | - Use of the software either in source or binary form, must be run |
Vkadaba | 15:b5d57daeb7c0 | 22 | on or directly connected to an Analog Devices Inc. component. |
Vkadaba | 15:b5d57daeb7c0 | 23 | |
Vkadaba | 15:b5d57daeb7c0 | 24 | THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR |
Vkadaba | 15:b5d57daeb7c0 | 25 | IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, |
Vkadaba | 15:b5d57daeb7c0 | 26 | MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
Vkadaba | 15:b5d57daeb7c0 | 27 | IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, |
Vkadaba | 15:b5d57daeb7c0 | 28 | INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
Vkadaba | 15:b5d57daeb7c0 | 29 | LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR |
Vkadaba | 15:b5d57daeb7c0 | 30 | SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
Vkadaba | 15:b5d57daeb7c0 | 31 | CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
Vkadaba | 15:b5d57daeb7c0 | 32 | OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
Vkadaba | 15:b5d57daeb7c0 | 33 | OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
Vkadaba | 15:b5d57daeb7c0 | 34 | */ |
Vkadaba | 15:b5d57daeb7c0 | 35 | |
Vkadaba | 15:b5d57daeb7c0 | 36 | /*! |
Vkadaba | 15:b5d57daeb7c0 | 37 | ****************************************************************************** |
Vkadaba | 15:b5d57daeb7c0 | 38 | * @file: utils.c |
Vkadaba | 15:b5d57daeb7c0 | 39 | * @brief: Interface Utilities for ADMW1001 |
Vkadaba | 15:b5d57daeb7c0 | 40 | *----------------------------------------------------------------------------- |
Vkadaba | 15:b5d57daeb7c0 | 41 | */ |
ADIJake | 0:85855ecd3257 | 42 | #include <stdlib.h> |
ADIJake | 0:85855ecd3257 | 43 | |
ADIJake | 0:85855ecd3257 | 44 | #include "utils.h" |
Vkadaba | 5:0728bde67bdb | 45 | #include "admw_log.h" |
ADIJake | 0:85855ecd3257 | 46 | |
ADIJake | 0:85855ecd3257 | 47 | void utils_printStatus( |
Vkadaba | 5:0728bde67bdb | 48 | ADMW_STATUS *pStatus) |
ADIJake | 0:85855ecd3257 | 49 | { |
Vkadaba | 5:0728bde67bdb | 50 | ADMW_LOG_INFO("Status Summary:"); |
ADIJake | 0:85855ecd3257 | 51 | |
Vkadaba | 23:bb685f35b08b | 52 | if (pStatus->deviceStatus == 0) { |
Vkadaba | 5:0728bde67bdb | 53 | ADMW_LOG_INFO("\tNo errors detected"); |
Vkadaba | 23:bb685f35b08b | 54 | } else { |
Vkadaba | 5:0728bde67bdb | 55 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_BUSY) |
Vkadaba | 5:0728bde67bdb | 56 | ADMW_LOG_INFO("\tCommand running"); |
Vkadaba | 5:0728bde67bdb | 57 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_DATAREADY) |
Vkadaba | 5:0728bde67bdb | 58 | ADMW_LOG_INFO("\tData ready"); |
Vkadaba | 5:0728bde67bdb | 59 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ERROR) |
Vkadaba | 5:0728bde67bdb | 60 | ADMW_LOG_INFO("\tActive Errors - RESET REQUIRED"); |
Vkadaba | 5:0728bde67bdb | 61 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_FIFO_ERROR) |
Vkadaba | 5:0728bde67bdb | 62 | ADMW_LOG_INFO("\tActive FIFO Errors - ATTENTION REQUIRED"); |
Vkadaba | 5:0728bde67bdb | 63 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_CONFIG_ERROR) |
Vkadaba | 5:0728bde67bdb | 64 | ADMW_LOG_INFO("\tActive Configuration Errors - ATTENTION REQUIRED"); |
Vkadaba | 5:0728bde67bdb | 65 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_LUT_ERROR) |
Vkadaba | 5:0728bde67bdb | 66 | ADMW_LOG_INFO("\tActive Look-Up Table Errors - ATTENTION REQUIRED"); |
Vkadaba | 23:bb685f35b08b | 67 | |
ADIJake | 0:85855ecd3257 | 68 | |
Vkadaba | 23:bb685f35b08b | 69 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ERROR) { |
Vkadaba | 5:0728bde67bdb | 70 | ADMW_LOG_INFO("\tActive Errors - ATTENTION REQUIRED"); |
Vkadaba | 5:0728bde67bdb | 71 | ADMW_LOG_INFO("\t\tLast Error Code: %u (0x%X)", |
Vkadaba | 23:bb685f35b08b | 72 | pStatus->errorCode, pStatus->errorCode); |
ADIJake | 0:85855ecd3257 | 73 | |
Vkadaba | 63:2655a04c00f5 | 74 | |
ADIJake | 0:85855ecd3257 | 75 | } |
ADIJake | 0:85855ecd3257 | 76 | |
Vkadaba | 23:bb685f35b08b | 77 | if (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ALERT) { |
Vkadaba | 5:0728bde67bdb | 78 | ADMW_LOG_INFO("\tActive Alerts - ATTENTION REQUIRED:"); |
Vkadaba | 5:0728bde67bdb | 79 | ADMW_LOG_INFO("\t\tLast Alert Code: %u (0x%X)", |
Vkadaba | 23:bb685f35b08b | 80 | pStatus->alertCode, pStatus->alertCode); |
ADIJake | 0:85855ecd3257 | 81 | |
Vkadaba | 23:bb685f35b08b | 82 | for (unsigned i = 0; i < ADMW1001_MAX_CHANNELS; i++) { |
ADIJake | 0:85855ecd3257 | 83 | if (pStatus->channelAlerts[i] == 0) |
ADIJake | 0:85855ecd3257 | 84 | continue; |
ADIJake | 0:85855ecd3257 | 85 | |
Vkadaba | 5:0728bde67bdb | 86 | ADMW_LOG_INFO("\t\tChannel #%u:", i); |
Vkadaba | 5:0728bde67bdb | 87 | ADMW_LOG_INFO("\t\t\tLast Alert Code: %u (0x%X)", |
Vkadaba | 23:bb685f35b08b | 88 | pStatus->channelAlertCodes[i], |
Vkadaba | 23:bb685f35b08b | 89 | pStatus->channelAlertCodes[i]); |
Vkadaba | 32:52445bef314d | 90 | if (pStatus->channelAlerts[i] & ADMW_ALERT_DETAIL_CH_ADC_NEAR_OVERRANGE) |
Vkadaba | 32:52445bef314d | 91 | ADMW_LOG_INFO("\t\t\ADC near overrange detected"); |
Vkadaba | 32:52445bef314d | 92 | if (pStatus->channelAlerts[i] & ADMW_ALERT_DETAIL_CH_SENSOR_UNDERRANGE) |
Vkadaba | 32:52445bef314d | 93 | ADMW_LOG_INFO("\t\t\tSensor underrange detected"); |
Vkadaba | 32:52445bef314d | 94 | if (pStatus->channelAlerts[i] & ADMW_ALERT_DETAIL_CH_SENSOR_OVERRANGE) |
Vkadaba | 32:52445bef314d | 95 | ADMW_LOG_INFO("\t\t\tSensor overrange detected"); |
Vkadaba | 32:52445bef314d | 96 | if (pStatus->channelAlerts[i] & ADMW_ALERT_DETAIL_CH_CJ_SOFT_FAULT) |
Vkadaba | 32:52445bef314d | 97 | ADMW_LOG_INFO("\t\t\tCJC soft fault alert detected"); |
Vkadaba | 32:52445bef314d | 98 | if (pStatus->channelAlerts[i] & ADMW_ALERT_DETAIL_CH_CJ_HARD_FAULT) |
Vkadaba | 32:52445bef314d | 99 | ADMW_LOG_INFO("\t\t\tCJC hard fault alert detected"); |
Vkadaba | 32:52445bef314d | 100 | if (pStatus->channelAlerts[i] & ADMW_ALERT_DETAIL_CH_ADC_INPUT_OVERRANGE) |
Vkadaba | 32:52445bef314d | 101 | ADMW_LOG_INFO("\t\t\tADC input overranage alert detected"); |
Vkadaba | 32:52445bef314d | 102 | if (pStatus->channelAlerts[i] & ADMW_ALERT_DETAIL_CH_SENSOR_HARDFAULT) |
Vkadaba | 32:52445bef314d | 103 | ADMW_LOG_INFO("\t\t\tChannel sensor hardfault alert detected"); |
ADIJake | 0:85855ecd3257 | 104 | } |
ADIJake | 0:85855ecd3257 | 105 | } |
ADIJake | 0:85855ecd3257 | 106 | |
Vkadaba | 5:0728bde67bdb | 107 | if ((pStatus->deviceStatus & ADMW_DEVICE_STATUS_ERROR) || |
Vkadaba | 23:bb685f35b08b | 108 | (pStatus->deviceStatus & ADMW_DEVICE_STATUS_ALERT)) { |
Vkadaba | 5:0728bde67bdb | 109 | ADMW_LOG_INFO("\t\tLast Debug Code: %u-%u", |
Vkadaba | 23:bb685f35b08b | 110 | (pStatus->debugCode >> 16) & 0xFFFF, |
Vkadaba | 23:bb685f35b08b | 111 | (pStatus->debugCode >> 0) & 0xFFFF); |
ADIJake | 0:85855ecd3257 | 112 | } |
ADIJake | 0:85855ecd3257 | 113 | } |
ADIJake | 0:85855ecd3257 | 114 | } |
ADIJake | 0:85855ecd3257 | 115 | |
ADIJake | 0:85855ecd3257 | 116 | void utils_printSamples( |
Vkadaba | 5:0728bde67bdb | 117 | ADMW_DATA_SAMPLE *pSampleBuffer, |
ADIJake | 0:85855ecd3257 | 118 | uint32_t nNumSamples, |
Vkadaba | 5:0728bde67bdb | 119 | ADMW_MEASUREMENT_MODE eMeasurementMode) |
ADIJake | 0:85855ecd3257 | 120 | { |
Vkadaba | 23:bb685f35b08b | 121 | for (uint32_t i = 0; i < nNumSamples; i++) { |
Vkadaba | 56:38b36e947602 | 122 | ADMW_LOG_INFO("Sample # %2d Channel # %2d :: Raw %f :: Processed %f :: flags: ERROR:%X , ALERT:%X", |
Vkadaba | 23:bb685f35b08b | 123 | i+1, |
Vkadaba | 23:bb685f35b08b | 124 | pSampleBuffer[i].channelId, |
Vkadaba | 56:38b36e947602 | 125 | pSampleBuffer[i].rawValue, |
Vkadaba | 23:bb685f35b08b | 126 | pSampleBuffer[i].processedValue, |
Vkadaba | 56:38b36e947602 | 127 | pSampleBuffer[i].status & ADMW_DEVICE_STATUS_ERROR, |
Vkadaba | 56:38b36e947602 | 128 | pSampleBuffer[i].status & ADMW_DEVICE_STATUS_ALERT ); |
Vkadaba | 10:14954555be2a | 129 | } |
ADIJake | 0:85855ecd3257 | 130 | } |
ADIJake | 0:85855ecd3257 | 131 | |
Vkadaba | 5:0728bde67bdb | 132 | static void gpioCallbackFn(ADMW_GPIO_PIN ePinId, void * pArg) |
ADIJake | 0:85855ecd3257 | 133 | { |
ADIJake | 0:85855ecd3257 | 134 | volatile bool *pbFlag = (volatile bool *)pArg; |
ADIJake | 0:85855ecd3257 | 135 | *pbFlag = true; |
ADIJake | 0:85855ecd3257 | 136 | } |
ADIJake | 0:85855ecd3257 | 137 | |
Vkadaba | 5:0728bde67bdb | 138 | ADMW_RESULT utils_registerCallbacks( |
Vkadaba | 5:0728bde67bdb | 139 | ADMW_DEVICE_HANDLE hDevice, |
ADIJake | 0:85855ecd3257 | 140 | volatile bool *pbDataReady, |
ADIJake | 0:85855ecd3257 | 141 | volatile bool *pbError, |
ADIJake | 0:85855ecd3257 | 142 | volatile bool *pbAlert) |
ADIJake | 0:85855ecd3257 | 143 | { |
Vkadaba | 5:0728bde67bdb | 144 | ADMW_RESULT res; |
ADIJake | 0:85855ecd3257 | 145 | bool state; |
ADIJake | 0:85855ecd3257 | 146 | |
Vkadaba | 5:0728bde67bdb | 147 | res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_DATAREADY, |
Vkadaba | 23:bb685f35b08b | 148 | gpioCallbackFn, (void *)pbDataReady); |
Vkadaba | 23:bb685f35b08b | 149 | if (res != ADMW_SUCCESS) { |
Vkadaba | 5:0728bde67bdb | 150 | ADMW_LOG_ERROR("Failed to register DATAREADY callback"); |
ADIJake | 0:85855ecd3257 | 151 | return res; |
ADIJake | 0:85855ecd3257 | 152 | } |
ADIJake | 0:85855ecd3257 | 153 | |
Vkadaba | 5:0728bde67bdb | 154 | res = admw_GetGpioState(hDevice, ADMW_GPIO_PIN_ALERT_ERROR, &state); |
Vkadaba | 23:bb685f35b08b | 155 | if (res != ADMW_SUCCESS) { |
Vkadaba | 5:0728bde67bdb | 156 | ADMW_LOG_ERROR("Failed to get current ERROR state"); |
ADIJake | 0:85855ecd3257 | 157 | return res; |
ADIJake | 0:85855ecd3257 | 158 | } |
Vkadaba | 23:bb685f35b08b | 159 | if (state) { |
Vkadaba | 5:0728bde67bdb | 160 | ADMW_LOG_ERROR("ERROR signal already asserted"); |
Vkadaba | 5:0728bde67bdb | 161 | return ADMW_FAILURE; |
ADIJake | 0:85855ecd3257 | 162 | } |
Vkadaba | 5:0728bde67bdb | 163 | res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_ALERT_ERROR, |
Vkadaba | 23:bb685f35b08b | 164 | gpioCallbackFn, (void *)pbError); |
Vkadaba | 23:bb685f35b08b | 165 | if (res != ADMW_SUCCESS) { |
Vkadaba | 5:0728bde67bdb | 166 | ADMW_LOG_ERROR("Failed to register ERROR callback"); |
ADIJake | 0:85855ecd3257 | 167 | return res; |
ADIJake | 0:85855ecd3257 | 168 | } |
ADIJake | 0:85855ecd3257 | 169 | |
Vkadaba | 5:0728bde67bdb | 170 | /*res = admw_GetGpioState(hDevice, ADMW_GPIO_PIN_ALERT, &state); |
Vkadaba | 5:0728bde67bdb | 171 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 172 | { |
Vkadaba | 5:0728bde67bdb | 173 | ADMW_LOG_ERROR("Failed to get current ALERT state"); |
ADIJake | 0:85855ecd3257 | 174 | return res; |
ADIJake | 0:85855ecd3257 | 175 | } |
ADIJake | 0:85855ecd3257 | 176 | if (state) |
ADIJake | 0:85855ecd3257 | 177 | { |
Vkadaba | 5:0728bde67bdb | 178 | ADMW_LOG_ERROR("ALERT signal already asserted"); |
Vkadaba | 5:0728bde67bdb | 179 | return ADMW_FAILURE; |
ADIJake | 1:63dd03580de4 | 180 | }*/ |
Vkadaba | 5:0728bde67bdb | 181 | res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_ALERT_ERROR, |
Vkadaba | 23:bb685f35b08b | 182 | gpioCallbackFn, (void *)pbAlert); |
Vkadaba | 23:bb685f35b08b | 183 | if (res != ADMW_SUCCESS) { |
Vkadaba | 5:0728bde67bdb | 184 | ADMW_LOG_ERROR("Failed to register ALERT callback"); |
ADIJake | 0:85855ecd3257 | 185 | return res; |
ADIJake | 0:85855ecd3257 | 186 | } |
ADIJake | 0:85855ecd3257 | 187 | |
Vkadaba | 5:0728bde67bdb | 188 | return ADMW_SUCCESS; |
ADIJake | 0:85855ecd3257 | 189 | } |
ADIJake | 0:85855ecd3257 | 190 | |
Vkadaba | 5:0728bde67bdb | 191 | ADMW_RESULT utils_deregisterCallbacks( |
Vkadaba | 5:0728bde67bdb | 192 | ADMW_DEVICE_HANDLE hDevice) |
ADIJake | 0:85855ecd3257 | 193 | { |
Vkadaba | 5:0728bde67bdb | 194 | ADMW_RESULT res; |
ADIJake | 0:85855ecd3257 | 195 | |
Vkadaba | 5:0728bde67bdb | 196 | res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_DATAREADY, |
Vkadaba | 23:bb685f35b08b | 197 | NULL, NULL); |
Vkadaba | 23:bb685f35b08b | 198 | if (res != ADMW_SUCCESS) { |
Vkadaba | 5:0728bde67bdb | 199 | ADMW_LOG_ERROR("Failed to deregister DATAREADY callback"); |
ADIJake | 0:85855ecd3257 | 200 | return res; |
ADIJake | 0:85855ecd3257 | 201 | } |
ADIJake | 0:85855ecd3257 | 202 | |
Vkadaba | 5:0728bde67bdb | 203 | res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_ALERT_ERROR, |
Vkadaba | 23:bb685f35b08b | 204 | NULL, NULL); |
Vkadaba | 23:bb685f35b08b | 205 | if (res != ADMW_SUCCESS) { |
Vkadaba | 5:0728bde67bdb | 206 | ADMW_LOG_ERROR("Failed to deregister ERROR callback"); |
ADIJake | 0:85855ecd3257 | 207 | return res; |
ADIJake | 0:85855ecd3257 | 208 | } |
ADIJake | 0:85855ecd3257 | 209 | |
Vkadaba | 5:0728bde67bdb | 210 | res = admw_RegisterGpioCallback(hDevice, ADMW_GPIO_PIN_ALERT_ERROR, |
Vkadaba | 23:bb685f35b08b | 211 | NULL, NULL); |
Vkadaba | 23:bb685f35b08b | 212 | if (res != ADMW_SUCCESS) { |
Vkadaba | 5:0728bde67bdb | 213 | ADMW_LOG_INFO("Failed to deregister ALERT callback"); |
ADIJake | 0:85855ecd3257 | 214 | return res; |
ADIJake | 0:85855ecd3257 | 215 | } |
ADIJake | 0:85855ecd3257 | 216 | |
Vkadaba | 5:0728bde67bdb | 217 | return ADMW_SUCCESS; |
ADIJake | 0:85855ecd3257 | 218 | } |
ADIJake | 0:85855ecd3257 | 219 | |
Vkadaba | 5:0728bde67bdb | 220 | ADMW_RESULT utils_runMeasurement( |
Vkadaba | 5:0728bde67bdb | 221 | ADMW_DEVICE_HANDLE hDevice, |
Vkadaba | 5:0728bde67bdb | 222 | ADMW_MEASUREMENT_MODE eMeasurementMode) |
ADIJake | 0:85855ecd3257 | 223 | { |
Vkadaba | 5:0728bde67bdb | 224 | ADMW_RESULT res; |
ADIJake | 0:85855ecd3257 | 225 | volatile bool bDataReady = false; |
ADIJake | 0:85855ecd3257 | 226 | volatile bool bError = false; |
ADIJake | 0:85855ecd3257 | 227 | volatile bool bAlert = false; |
ADIJake | 0:85855ecd3257 | 228 | res = utils_registerCallbacks(hDevice, &bDataReady, &bError, &bAlert); |
Vkadaba | 5:0728bde67bdb | 229 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 230 | return res; |
ADIJake | 0:85855ecd3257 | 231 | |
ADIJake | 0:85855ecd3257 | 232 | /* |
ADIJake | 0:85855ecd3257 | 233 | * Retrieve the number of samples per cycle, per DATAREADY pulse, etc. for |
ADIJake | 0:85855ecd3257 | 234 | * this configuration. |
ADIJake | 0:85855ecd3257 | 235 | */ |
Vkadaba | 5:0728bde67bdb | 236 | ADMW1001_OPERATING_MODE eOperatingMode; |
Vkadaba | 5:0728bde67bdb | 237 | ADMW1001_DATAREADY_MODE eDataReadyMode; |
ADIJake | 0:85855ecd3257 | 238 | uint32_t nSamplesPerDataready; |
ADIJake | 0:85855ecd3257 | 239 | uint32_t nSamplesPerCycle; |
ADIJake | 0:85855ecd3257 | 240 | uint8_t nBytesPerSample; |
Vkadaba | 5:0728bde67bdb | 241 | res = admw1001_GetDataReadyModeInfo(hDevice, |
Vkadaba | 23:bb685f35b08b | 242 | eMeasurementMode, |
Vkadaba | 23:bb685f35b08b | 243 | &eOperatingMode, |
Vkadaba | 23:bb685f35b08b | 244 | &eDataReadyMode, |
Vkadaba | 23:bb685f35b08b | 245 | &nSamplesPerDataready, |
Vkadaba | 23:bb685f35b08b | 246 | &nSamplesPerCycle, |
Vkadaba | 23:bb685f35b08b | 247 | &nBytesPerSample); |
Vkadaba | 5:0728bde67bdb | 248 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 249 | return res; |
ADIJake | 0:85855ecd3257 | 250 | |
ADIJake | 0:85855ecd3257 | 251 | /* |
ADIJake | 0:85855ecd3257 | 252 | * Allocate a buffer to store the samples retrieved on each DATAREADY pulse |
ADIJake | 0:85855ecd3257 | 253 | */ |
Vkadaba | 5:0728bde67bdb | 254 | ADMW_DATA_SAMPLE *pSampleBuffer; |
Vkadaba | 5:0728bde67bdb | 255 | pSampleBuffer = malloc(sizeof(ADMW_DATA_SAMPLE) * |
ADIJake | 0:85855ecd3257 | 256 | nSamplesPerDataready); |
Vkadaba | 23:bb685f35b08b | 257 | if (pSampleBuffer == NULL) { |
Vkadaba | 5:0728bde67bdb | 258 | ADMW_LOG_ERROR("Failed to allocate sample buffer"); |
Vkadaba | 5:0728bde67bdb | 259 | return ADMW_NO_MEM; |
ADIJake | 0:85855ecd3257 | 260 | } |
ADIJake | 0:85855ecd3257 | 261 | |
ADIJake | 0:85855ecd3257 | 262 | /* |
ADIJake | 0:85855ecd3257 | 263 | * Kick off the measurement cycle(s) here |
ADIJake | 0:85855ecd3257 | 264 | */ |
Vkadaba | 5:0728bde67bdb | 265 | ADMW_LOG_INFO("Starting measurement"); |
Vkadaba | 5:0728bde67bdb | 266 | res = admw_StartMeasurement(hDevice, eMeasurementMode); |
Vkadaba | 23:bb685f35b08b | 267 | if (res != ADMW_SUCCESS) { |
Vkadaba | 5:0728bde67bdb | 268 | ADMW_LOG_ERROR("Failed to start measurement"); |
ADIJake | 0:85855ecd3257 | 269 | return res; |
ADIJake | 0:85855ecd3257 | 270 | } |
ADIJake | 0:85855ecd3257 | 271 | |
ADIJake | 0:85855ecd3257 | 272 | /* |
ADIJake | 0:85855ecd3257 | 273 | * Loop continuously unless operating mode is single-cycle |
ADIJake | 0:85855ecd3257 | 274 | */ |
ADIJake | 0:85855ecd3257 | 275 | uint32_t nSampleCount = 0; |
ADIJake | 0:85855ecd3257 | 276 | uint32_t nReturned; |
Vkadaba | 23:bb685f35b08b | 277 | while (true) { |
Vkadaba | 5:0728bde67bdb | 278 | ADMW_STATUS status; |
ADIJake | 0:85855ecd3257 | 279 | |
ADIJake | 0:85855ecd3257 | 280 | /* |
ADIJake | 0:85855ecd3257 | 281 | * Wait until the next batch of 1 or more samples is ready, continuously |
ADIJake | 0:85855ecd3257 | 282 | * checking DATAREADY until it is asserted |
ADIJake | 0:85855ecd3257 | 283 | */ |
Vkadaba | 39:e255f52072fc | 284 | while (! (bDataReady || bError)); |
ADIJake | 0:85855ecd3257 | 285 | |
Vkadaba | 39:e255f52072fc | 286 | if (!bError) { |
Vkadaba | 39:e255f52072fc | 287 | /* |
Vkadaba | 39:e255f52072fc | 288 | * Get data samples from the measurement cycle, if no error has occurred |
Vkadaba | 39:e255f52072fc | 289 | */ |
Vkadaba | 39:e255f52072fc | 290 | bDataReady = false; |
Vkadaba | 39:e255f52072fc | 291 | res = admw_GetData(hDevice, eMeasurementMode, pSampleBuffer, |
Vkadaba | 39:e255f52072fc | 292 | nBytesPerSample, nSamplesPerDataready, |
Vkadaba | 39:e255f52072fc | 293 | &nReturned); |
Vkadaba | 39:e255f52072fc | 294 | if (res != ADMW_SUCCESS) { |
Vkadaba | 39:e255f52072fc | 295 | if (res == ADMW_INCOMPLETE) { |
Vkadaba | 39:e255f52072fc | 296 | /* |
Vkadaba | 39:e255f52072fc | 297 | * This is expected in cases where cycleSkipCount may |
Vkadaba | 39:e255f52072fc | 298 | * be non-zero for some channels, resulting in |
Vkadaba | 39:e255f52072fc | 299 | * variable-length sequences |
Vkadaba | 39:e255f52072fc | 300 | */ |
Vkadaba | 55:215da406282b | 301 | |
Vkadaba | 39:e255f52072fc | 302 | ADMW_LOG_DEBUG("Retrieved %u of %u requested data samples", |
Vkadaba | 56:38b36e947602 | 303 | nReturned, nSamplesPerDataready); |
Vkadaba | 39:e255f52072fc | 304 | continue; |
Vkadaba | 39:e255f52072fc | 305 | } else { |
Vkadaba | 39:e255f52072fc | 306 | ADMW_LOG_WARN("Failed to get data samples from device"); |
Vkadaba | 39:e255f52072fc | 307 | return res; |
Vkadaba | 39:e255f52072fc | 308 | } |
ADIJake | 0:85855ecd3257 | 309 | } |
Vkadaba | 39:e255f52072fc | 310 | |
Vkadaba | 39:e255f52072fc | 311 | /* |
Vkadaba | 39:e255f52072fc | 312 | * Display the data samples. |
Vkadaba | 39:e255f52072fc | 313 | * |
Vkadaba | 39:e255f52072fc | 314 | * NOTE: this requires a sufficient idle time between subsequent |
Vkadaba | 39:e255f52072fc | 315 | * DATAREADY pulses to allow printing to occur. Otherwise, |
Vkadaba | 39:e255f52072fc | 316 | * subsequent samples may be missed if not retrieved promptly when |
Vkadaba | 39:e255f52072fc | 317 | * the next DATAREADY assertion occurs. |
Vkadaba | 39:e255f52072fc | 318 | */ |
Vkadaba | 39:e255f52072fc | 319 | utils_printSamples(pSampleBuffer, nReturned, eMeasurementMode); |
Vkadaba | 39:e255f52072fc | 320 | nSampleCount += nReturned; |
ADIJake | 0:85855ecd3257 | 321 | } |
ADIJake | 0:85855ecd3257 | 322 | |
ADIJake | 0:85855ecd3257 | 323 | /* |
ADIJake | 0:85855ecd3257 | 324 | * Check and print device status if errors/alerts have been triggered |
ADIJake | 0:85855ecd3257 | 325 | */ |
Vkadaba | 23:bb685f35b08b | 326 | if (bError || bAlert) { |
Vkadaba | 5:0728bde67bdb | 327 | res = admw_GetStatus(hDevice, &status); |
Vkadaba | 23:bb685f35b08b | 328 | if (res != ADMW_SUCCESS) { |
Vkadaba | 5:0728bde67bdb | 329 | ADMW_LOG_ERROR("Failed to retrieve device status"); |
ADIJake | 0:85855ecd3257 | 330 | return res; |
ADIJake | 0:85855ecd3257 | 331 | } |
ADIJake | 0:85855ecd3257 | 332 | |
ADIJake | 0:85855ecd3257 | 333 | if (status.deviceStatus & |
Vkadaba | 23:bb685f35b08b | 334 | (ADMW_DEVICE_STATUS_ERROR | ADMW_DEVICE_STATUS_ALERT)) { |
ADIJake | 0:85855ecd3257 | 335 | utils_printStatus(&status); |
ADIJake | 0:85855ecd3257 | 336 | |
ADIJake | 0:85855ecd3257 | 337 | /* Break out of the loop if any errors are raised */ |
ADIJake | 0:85855ecd3257 | 338 | if (bError) |
ADIJake | 0:85855ecd3257 | 339 | break; |
ADIJake | 0:85855ecd3257 | 340 | } |
ADIJake | 0:85855ecd3257 | 341 | } |
ADIJake | 0:85855ecd3257 | 342 | |
Vkadaba | 23:bb685f35b08b | 343 | if (eOperatingMode == ADMW1001_OPERATING_MODE_SINGLECYCLE) { |
ADIJake | 0:85855ecd3257 | 344 | /* |
ADIJake | 0:85855ecd3257 | 345 | * In this mode, break out of the loop when the measurement command |
ADIJake | 0:85855ecd3257 | 346 | * has completed. |
ADIJake | 0:85855ecd3257 | 347 | * |
ADIJake | 0:85855ecd3257 | 348 | * One option is to check for the expected number of samples to be |
ADIJake | 0:85855ecd3257 | 349 | * returned for the cycle. However, cycles may have variable-length |
ADIJake | 0:85855ecd3257 | 350 | * sequences if the cycleSkipCount option is non-zero for any of the |
ADIJake | 0:85855ecd3257 | 351 | * channels. |
ADIJake | 0:85855ecd3257 | 352 | * |
ADIJake | 0:85855ecd3257 | 353 | * So, instead, we check for the command-running status, which |
ADIJake | 0:85855ecd3257 | 354 | * will de-assert in this mode when the measurement command has |
ADIJake | 0:85855ecd3257 | 355 | * completed a single cycle. |
ADIJake | 0:85855ecd3257 | 356 | */ |
ADIJake | 0:85855ecd3257 | 357 | bool bCommandRunning; |
Vkadaba | 5:0728bde67bdb | 358 | res = admw_GetCommandRunningState(hDevice, &bCommandRunning); |
Vkadaba | 23:bb685f35b08b | 359 | if (res != ADMW_SUCCESS) { |
Vkadaba | 5:0728bde67bdb | 360 | ADMW_LOG_ERROR("Failed to get command-running status"); |
ADIJake | 0:85855ecd3257 | 361 | return res; |
ADIJake | 0:85855ecd3257 | 362 | } |
ADIJake | 0:85855ecd3257 | 363 | |
ADIJake | 0:85855ecd3257 | 364 | if (!bCommandRunning && !bDataReady) |
ADIJake | 0:85855ecd3257 | 365 | break; |
ADIJake | 0:85855ecd3257 | 366 | } |
ADIJake | 0:85855ecd3257 | 367 | } |
ADIJake | 0:85855ecd3257 | 368 | |
Vkadaba | 5:0728bde67bdb | 369 | ADMW_LOG_INFO("Stopping measurement"); |
Vkadaba | 5:0728bde67bdb | 370 | res = admw_StopMeasurement(hDevice); |
Vkadaba | 23:bb685f35b08b | 371 | if (res != ADMW_SUCCESS) { |
Vkadaba | 5:0728bde67bdb | 372 | ADMW_LOG_ERROR("Failed to send stop measurement"); |
ADIJake | 0:85855ecd3257 | 373 | return res; |
ADIJake | 0:85855ecd3257 | 374 | } |
ADIJake | 0:85855ecd3257 | 375 | |
ADIJake | 0:85855ecd3257 | 376 | free(pSampleBuffer); |
ADIJake | 0:85855ecd3257 | 377 | |
ADIJake | 0:85855ecd3257 | 378 | res = utils_deregisterCallbacks(hDevice); |
Vkadaba | 5:0728bde67bdb | 379 | if (res != ADMW_SUCCESS) |
ADIJake | 0:85855ecd3257 | 380 | return res; |
ADIJake | 0:85855ecd3257 | 381 | |
Vkadaba | 5:0728bde67bdb | 382 | return ADMW_SUCCESS; |
ADIJake | 0:85855ecd3257 | 383 | } |
ADIJake | 0:85855ecd3257 | 384 |