Code clean up and handling FIFO errors

Revision:
56:38b36e947602
Parent:
45:f5f553b8c0d5
Child:
62:a5b88f433406
--- a/rtd_4w_config.c	Mon Feb 24 07:04:35 2020 +0000
+++ b/rtd_4w_config.c	Mon Feb 24 08:49:25 2020 +0000
@@ -43,24 +43,22 @@
 #include "admw_config_types.h"
 
 ADMW_CONFIG rtd_4w_config = {
-   .versionId = { .major = 2, .minor = 0 },
+    .versionId = { .major = 2, .minor = 0 },
     .productId = ADMW_PRODUCT_ID_ADMW1001,
     .admw1001 = {
         .power = {
             .powerMode = ADMW1001_POWER_MODE_ACTIVE,
         },
         .measurement = {
-            .externalRefVoltage = 0.0,
-            .operatingMode = ADMW1001_OPERATING_MODE_SINGLECYCLE,
-            .dataReadyMode = ADMW1001_DATAREADY_PER_CYCLE, // FIX: Temporarily all values from json are hardcoded to this one in the Contracts.FileGenerator - > file translations!!
-            .excitationState= ADMW1001_ADC_EXC_STATE_CYCLE_POWER,                
-            .groundSwitch = ADMW1001_ADC_GND_SW_OPEN,             
+            .externalRefVoltage=0.0,
+            .AVDDVoltage=3.0,
+            .operatingMode = ADMW1001_OPERATING_MODE_CONTINUOUS,
+            .dataReadyMode = ADMW1001_DATAREADY_PER_CYCLE,
             .cycleInterval = 0,
-            .RSenseValue = 1000.0, 
-        },
-        .diagnostics = {
-            .disableGlobalDiag = true,
-            .disableMeasurementDiag = true,
+            .excitationState = ADMW1001_ADC_EXC_STATE_CYCLE_POWER,
+            .vBiasEnable = false,
+            .RSenseValue = 1000,
+            .groundSwitch = ADMW1001_ADC_GND_SW_OPEN,
         },
         .channels = {
             [ADMW1001_CH_ID_ANLG_1_UNIVERSAL] = {
@@ -69,28 +67,24 @@
                 .compensationChannel = ADMW1001_CH_ID_NONE,
                 .lutSelect = ADMW1001_LUT_DEFAULT,
                 .measurementUnit = ADMW1001_MEASUREMENT_UNIT_CELSIUS,
+                .extraSettlingTime = 4.49999986449257,
                 .lowThreshold = -50,
                 .highThreshold = 250,
-                .offsetAdjustment = 0.0,
-                .gainAdjustment = 0.0,
-                .sensorParameter = 0.0,
                 .measurementsPerCycle = 1,
-                .cycleSkipCount = 0,
-                .extraSettlingTime = 4499.99986449257,
-                .priority = 0,
+                .offsetAdjustment = 0,
+                .gainAdjustment = 1,
                 .adcChannelConfig = {
                     .sensor = ADMW1001_ADC_SENSOR_RTD_4WIRE_PT100,
                     .gain = ADMW1001_ADC_GAIN_1X,
                     .current = {
-                        .outputLevel = ADMW1001_ADC_EXC_CURRENT_250uA,
-                        .diodeRatio = 0,
+                        .outputLevel = ADMW1001_ADC_EXC_CURRENT_500uA,
                     },
                     .rtdCurve = ADMW1001_ADC_RTD_CURVE_EUROPEAN,
                     .filter = {
                         .type = ADMW1001_ADC_FILTER_SINC3,
                         .sf = ADMW1001_SF_8P24HZ,
                         .chopMode = ADMW1001_CHOP_MD_SW,
-                        .notch1p2 = true,
+                        .notch1p2 = true
                     },
                     .reference = ADMW1001_ADC_REFERENCE_VOLTAGE_INTERNAL,
                     .bufferBypass = ADMW1001_BUFFER_BYPASSS_DISABLED,
@@ -98,4 +92,4 @@
             },
         },
     },
-};
+};
\ No newline at end of file