Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of mbed-dev by
Diff: targets/TARGET_NORDIC/TARGET_NRF5/i2c_api.c
- Revision:
- 160:d5399cc887bb
- Parent:
- 150:02e0a0aed4ec
- Child:
- 165:e614a9f1c9e2
--- a/targets/TARGET_NORDIC/TARGET_NRF5/i2c_api.c Tue Feb 28 17:13:35 2017 +0000 +++ b/targets/TARGET_NORDIC/TARGET_NRF5/i2c_api.c Tue Mar 14 16:40:56 2017 +0000 @@ -1,5 +1,5 @@ /* - * Copyright (c) 2013 Nordic Semiconductor ASA + * Copyright (c) 2017 Nordic Semiconductor ASA * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, @@ -43,8 +43,17 @@ #include "mbed_assert.h" #include "mbed_error.h" -#include "nrf_drv_twi.h" +#include "nrf_twi.h" +#include "nrf_drv_common.h" +#include "nrf_drv_config.h" #include "app_util_platform.h" +#include "nrf_gpio.h" +#include "nrf_delay.h" + +// An arbitrary value used as the counter in loops waiting for given event +// (e.g. STOPPED), needed to avoid infinite loops (and not involve any timers +// or tickers). +#define TIMEOUT_VALUE 1000 #if DEVICE_I2C_ASYNCH #define TWI_IDX(obj) ((obj)->i2c.twi_idx) @@ -54,59 +63,36 @@ #define TWI_INFO(obj) (&m_twi_info[TWI_IDX(obj)]) typedef struct { - bool initialized; - nrf_drv_twi_config_t config; - volatile bool transfer_finished; + bool initialized; + uint32_t pselsda; + uint32_t pselscl; + nrf_twi_frequency_t frequency; + bool start_twi; - #if DEVICE_I2C_ASYNCH - volatile uint32_t events; - void (*handler)(void); - uint32_t event_mask; - #endif +#if DEVICE_I2C_ASYNCH + volatile bool active; + uint8_t const *tx; + size_t tx_length; + uint8_t *rx; + size_t rx_length; + bool stop; + + volatile uint32_t events; + void (*handler)(void); + uint32_t evt_mask; +#endif // DEVICE_I2C_ASYNCH } twi_info_t; static twi_info_t m_twi_info[TWI_COUNT]; -static nrf_drv_twi_t const m_twi_instances[TWI_COUNT] = { +static NRF_TWI_Type * const m_twi_instances[TWI_COUNT] = { #if TWI0_ENABLED - NRF_DRV_TWI_INSTANCE(0), + NRF_TWI0, #endif #if TWI1_ENABLED - NRF_DRV_TWI_INSTANCE(1), + NRF_TWI1, #endif }; -static void twi_event_handler(nrf_drv_twi_evt_t const *event, void *context) -{ - twi_info_t * twi_info = TWI_INFO((i2c_t *)context); - twi_info->transfer_finished = true; - -#if DEVICE_I2C_ASYNCH - switch (event->type) { - case NRF_DRV_TWI_EVT_DONE: - twi_info->events |= I2C_EVENT_TRANSFER_COMPLETE; - break; - - case NRF_DRV_TWI_EVT_ADDRESS_NACK: - twi_info->events |= I2C_EVENT_ERROR_NO_SLAVE; - break; - - case NRF_DRV_TWI_EVT_DATA_NACK: - twi_info->events |= I2C_EVENT_ERROR; - break; - } - - if (twi_info->handler) { - twi_info->handler(); - } -#endif // DEVICE_I2C_ASYNCH -} - -static uint8_t twi_address(int i2c_address) -{ - // The TWI driver requires 7-bit slave address (without R/W bit). - return (i2c_address >> 1); -} - void SPI0_TWI0_IRQHandler(void); void SPI1_TWI1_IRQHandler(void); @@ -123,207 +109,580 @@ SPI1_TWI1_IRQn, (uint32_t) SPI1_TWI1_IRQHandler } - #endif + #endif }; +#ifdef NRF51 + #define TWI_IRQ_PRIORITY APP_IRQ_PRIORITY_LOW +#elif defined(NRF52) + #define TWI_IRQ_PRIORITY APP_IRQ_PRIORITY_LOWEST +#endif + + +#if DEVICE_I2C_ASYNCH +static void start_asynch_rx(twi_info_t *twi_info, NRF_TWI_Type *twi) +{ + if (twi_info->rx_length == 1 && twi_info->stop) { + nrf_twi_shorts_set(twi, NRF_TWI_SHORT_BB_STOP_MASK); + } else { + nrf_twi_shorts_set(twi, NRF_TWI_SHORT_BB_SUSPEND_MASK); + } + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STARTRX); +} + +static void twi_irq_handler(uint8_t instance_idx) +{ + twi_info_t *twi_info = &m_twi_info[instance_idx]; + + NRF_TWI_Type *twi = m_twi_instances[instance_idx]; + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_ERROR)) { + nrf_twi_event_clear(twi, NRF_TWI_EVENT_ERROR); + + // In case of an error, force STOP. + // The current transfer may be suspended (if it is RX), so it must be + // resumed before the STOP task is triggered. + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STOP); + + uint32_t errorsrc = nrf_twi_errorsrc_get_and_clear(twi); + twi_info->events |= I2C_EVENT_ERROR; + if (errorsrc & NRF_TWI_ERROR_ADDRESS_NACK) { + twi_info->events |= I2C_EVENT_ERROR_NO_SLAVE; + } + if (errorsrc & NRF_TWI_ERROR_DATA_NACK) { + twi_info->events |= I2C_EVENT_TRANSFER_EARLY_NACK; + } + } + + bool finished = false; + + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_TXDSENT)) { + nrf_twi_event_clear(twi, NRF_TWI_EVENT_TXDSENT); + + MBED_ASSERT(twi_info->tx_length > 0); + --(twi_info->tx_length); + // Send next byte if there is still something to be sent. + if (twi_info->tx_length > 0) { + nrf_twi_txd_set(twi, *(twi_info->tx)); + ++(twi_info->tx); + // It TX is done, start RX if requested. + } else if (twi_info->rx_length > 0) { + start_asynch_rx(twi_info, twi); + // If there is nothing more to do, finalize the transfer. + } else { + if (twi_info->stop) { + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STOP); + } else { + nrf_twi_task_trigger(twi, NRF_TWI_TASK_SUSPEND); + finished = true; + } + twi_info->events |= I2C_EVENT_TRANSFER_COMPLETE; + } + } + + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_RXDREADY)) { + nrf_twi_event_clear(twi, NRF_TWI_EVENT_RXDREADY); + + MBED_ASSERT(twi_info->rx_length > 0); + *(twi_info->rx) = nrf_twi_rxd_get(twi); + ++(twi_info->rx); + --(twi_info->rx_length); + + if (twi_info->rx_length > 0) { + // If more bytes should be received, resume the transfer + // (in case the stop condition should be generated after the next + // byte, change the shortcuts configuration first). + if (twi_info->rx_length == 1 && twi_info->stop) { + nrf_twi_shorts_set(twi, NRF_TWI_SHORT_BB_STOP_MASK); + } + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); + } else { + // If all requested bytes were received, finalize the transfer. + finished = true; + twi_info->events |= I2C_EVENT_TRANSFER_COMPLETE; + } + } + + if (finished || + nrf_twi_event_check(twi, NRF_TWI_EVENT_STOPPED) || + (nrf_twi_int_enable_check(twi, NRF_TWI_INT_SUSPENDED_MASK) && + nrf_twi_event_check(twi, NRF_TWI_EVENT_SUSPENDED))) { + // There is no need to clear the STOPPED and SUSPENDED events here, + // they will no longer generate the interrupt - see below. + + nrf_twi_shorts_set(twi, 0); + // Disable all interrupt sources. + nrf_twi_int_disable(twi, UINT32_MAX); + twi_info->active = false; + + if (twi_info->handler) { + twi_info->handler(); + } + } +} + +#if TWI0_ENABLED +static void irq_handler_twi0(void) +{ + twi_irq_handler(TWI0_INSTANCE_INDEX); +} +#endif +#if TWI1_ENABLED +static void irq_handler_twi1(void) +{ + twi_irq_handler(TWI1_INSTANCE_INDEX); +} +#endif +static nrf_drv_irq_handler_t const m_twi_irq_handlers[TWI_COUNT] = +{ +#if TWI0_ENABLED + irq_handler_twi0, +#endif +#if TWI1_ENABLED + irq_handler_twi1, +#endif +}; +#endif // DEVICE_I2C_ASYNCH + + +static void configure_twi_pin(uint32_t pin, nrf_gpio_pin_dir_t dir) +{ + nrf_gpio_cfg(pin, + dir, + NRF_GPIO_PIN_INPUT_CONNECT, + NRF_GPIO_PIN_PULLUP, + NRF_GPIO_PIN_S0D1, + NRF_GPIO_PIN_NOSENSE); +} + +static void twi_clear_bus(twi_info_t *twi_info) +{ + // Try to set SDA high, and check if no slave tries to drive it low. + nrf_gpio_pin_set(twi_info->pselsda); + configure_twi_pin(twi_info->pselsda, NRF_GPIO_PIN_DIR_OUTPUT); + // In case SDA is low, make up to 9 cycles on SCL line to help the slave + // that pulls SDA low release it. + if (!nrf_gpio_pin_read(twi_info->pselsda)) { + nrf_gpio_pin_set(twi_info->pselscl); + configure_twi_pin(twi_info->pselscl, NRF_GPIO_PIN_DIR_OUTPUT); + nrf_delay_us(4); + + for (int i = 0; i < 9; i++) { + if (nrf_gpio_pin_read(twi_info->pselsda)) { + break; + } + nrf_gpio_pin_clear(twi_info->pselscl); + nrf_delay_us(4); + nrf_gpio_pin_set(twi_info->pselscl); + nrf_delay_us(4); + } + + // Finally, generate STOP condition to put the bus into initial state. + nrf_gpio_pin_clear(twi_info->pselsda); + nrf_delay_us(4); + nrf_gpio_pin_set(twi_info->pselsda); + } +} void i2c_init(i2c_t *obj, PinName sda, PinName scl) { int i; for (i = 0; i < TWI_COUNT; ++i) { if (m_twi_info[i].initialized && - m_twi_info[i].config.sda == (uint32_t)sda && - m_twi_info[i].config.scl == (uint32_t)scl) { + m_twi_info[i].pselsda == (uint32_t)sda && + m_twi_info[i].pselscl == (uint32_t)scl) { TWI_IDX(obj) = i; - TWI_INFO(obj)->config.frequency = NRF_TWI_FREQ_100K; + TWI_INFO(obj)->frequency = NRF_TWI_FREQ_100K; i2c_reset(obj); return; } } - nrf_drv_twi_config_t const config = { - .scl = scl, - .sda = sda, - .frequency = NRF_TWI_FREQ_100K, -#ifdef NRF51 - .interrupt_priority = APP_IRQ_PRIORITY_LOW -#elif defined(NRF52) - .interrupt_priority = APP_IRQ_PRIORITY_LOWEST -#endif - - }; - for (i = 0; i < TWI_COUNT; ++i) { if (!m_twi_info[i].initialized) { + TWI_IDX(obj) = i; - NVIC_SetVector(twi_handlers[i].IRQn, twi_handlers[i].vector); + twi_info_t *twi_info = TWI_INFO(obj); + twi_info->initialized = true; + twi_info->pselsda = (uint32_t)sda; + twi_info->pselscl = (uint32_t)scl; + twi_info->frequency = NRF_TWI_FREQ_100K; + twi_info->start_twi = false; +#if DEVICE_I2C_ASYNCH + twi_info->active = false; +#endif + + twi_clear_bus(twi_info); - nrf_drv_twi_t const *twi = &m_twi_instances[i]; - ret_code_t ret_code = - nrf_drv_twi_init(twi, &config, twi_event_handler, obj); - if (ret_code == NRF_SUCCESS) { - TWI_IDX(obj) = i; - TWI_INFO(obj)->initialized = true; - TWI_INFO(obj)->config = config; + configure_twi_pin(twi_info->pselsda, NRF_GPIO_PIN_DIR_INPUT); + configure_twi_pin(twi_info->pselscl, NRF_GPIO_PIN_DIR_INPUT); + + i2c_reset(obj); - nrf_drv_twi_enable(twi); - return; - } +#if DEVICE_I2C_ASYNCH + nrf_drv_common_per_res_acquire(m_twi_instances[i], + m_twi_irq_handlers[i]); + NVIC_SetVector(twi_handlers[i].IRQn, twi_handlers[i].vector); + nrf_drv_common_irq_enable(twi_handlers[i].IRQn, TWI_IRQ_PRIORITY); +#endif + + return; } } - // No available peripheral error("No available I2C peripheral\r\n"); } void i2c_reset(i2c_t *obj) { twi_info_t *twi_info = TWI_INFO(obj); - nrf_drv_twi_t const *twi = &m_twi_instances[TWI_IDX(obj)]; + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; - nrf_drv_twi_uninit(twi); - nrf_drv_twi_init(twi, &twi_info->config, twi_event_handler, obj); - nrf_drv_twi_enable(twi); + nrf_twi_disable(twi); + nrf_twi_pins_set(twi, twi_info->pselscl, twi_info->pselsda); + nrf_twi_frequency_set(twi, twi_info->frequency); + nrf_twi_enable(twi); } int i2c_start(i2c_t *obj) { - (void)obj; + twi_info_t *twi_info = TWI_INFO(obj); +#if DEVICE_I2C_ASYNCH + if (twi_info->active) { + return I2C_ERROR_BUS_BUSY; + } +#endif + twi_info->start_twi = true; - return -1; // Not implemented. + return 0; } int i2c_stop(i2c_t *obj) { - (void)obj; + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; - return -1; // Not implemented. + // The current transfer may be suspended (if it is RX), so it must be + // resumed before the STOP task is triggered. + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STOP); + uint32_t remaining_time = TIMEOUT_VALUE; + do { + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_STOPPED)) { + return 0; + } + } while (--remaining_time); + + return 1; } void i2c_frequency(i2c_t *obj, int hz) { twi_info_t *twi_info = TWI_INFO(obj); - nrf_drv_twi_t const *twi = &m_twi_instances[TWI_IDX(obj)]; + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; if (hz < 250000) { - twi_info->config.frequency = NRF_TWI_FREQ_100K; + twi_info->frequency = NRF_TWI_FREQ_100K; } else if (hz < 400000) { - twi_info->config.frequency = NRF_TWI_FREQ_250K; + twi_info->frequency = NRF_TWI_FREQ_250K; } else { - twi_info->config.frequency = NRF_TWI_FREQ_400K; + twi_info->frequency = NRF_TWI_FREQ_400K; } - nrf_twi_frequency_set(twi->reg.p_twi, twi_info->config.frequency); + nrf_twi_frequency_set(twi, twi_info->frequency); +} + +static uint8_t twi_address(int i2c_address) +{ + // The TWI peripheral requires 7-bit slave address (without R/W bit). + return (i2c_address >> 1); +} + +static void start_twi_read(NRF_TWI_Type *twi, int address) +{ + nrf_twi_event_clear(twi, NRF_TWI_EVENT_STOPPED); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_RXDREADY); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_ERROR); + (void)nrf_twi_errorsrc_get_and_clear(twi); + + nrf_twi_shorts_set(twi, NRF_TWI_SHORT_BB_SUSPEND_MASK); + + nrf_twi_address_set(twi, twi_address(address)); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STARTRX); } int i2c_read(i2c_t *obj, int address, char *data, int length, int stop) { - (void)stop; + // Zero-length RX transfers are not supported. Such transfers cannot + // be easily achieved with TWI peripheral (some dirty tricks would be + // required for this), and they are actually useless (TX can be used + // to check if the address is acknowledged by a slave). + MBED_ASSERT(length > 0); twi_info_t *twi_info = TWI_INFO(obj); - nrf_drv_twi_t const *twi = &m_twi_instances[TWI_IDX(obj)]; +#if DEVICE_I2C_ASYNCH + if (twi_info->active) { + return I2C_ERROR_BUS_BUSY; + } +#endif + twi_info->start_twi = false; + + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; + start_twi_read(twi, address); + + int result = length; + while (length > 0) { + int byte_read_result = i2c_byte_read(obj, (stop && length == 1)); + if (byte_read_result < 0) { + // When an error occurs, return the number of bytes that have been + // received successfully. + result -= length; + // Force STOP condition. + stop = 1; + break; + } + *data++ = (uint8_t)byte_read_result; + --length; + } + + if (stop) { + (void)i2c_stop(obj); + } + + return result; +} - twi_info->transfer_finished = false; - ret_code_t ret_code = nrf_drv_twi_rx(twi, twi_address(address), - (uint8_t *)data, length); - if (ret_code != NRF_SUCCESS) { - return 0; - } - while (!twi_info->transfer_finished) {} - return nrf_drv_twi_data_count_get(twi); +static uint8_t twi_byte_write(NRF_TWI_Type *twi, uint8_t data) +{ + nrf_twi_event_clear(twi, NRF_TWI_EVENT_TXDSENT); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_ERROR); + + nrf_twi_txd_set(twi, data); + uint32_t remaining_time = TIMEOUT_VALUE; + do { + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_TXDSENT)) { + nrf_twi_event_clear(twi, NRF_TWI_EVENT_TXDSENT); + return 1; // ACK received + } + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_ERROR)) { + nrf_twi_event_clear(twi, NRF_TWI_EVENT_ERROR); + return 0; // some error occurred + } + } while (--remaining_time); + + return 2; // timeout; +} + +static void start_twi_write(NRF_TWI_Type *twi, int address) +{ + nrf_twi_event_clear(twi, NRF_TWI_EVENT_STOPPED); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_TXDSENT); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_ERROR); + (void)nrf_twi_errorsrc_get_and_clear(twi); + + nrf_twi_shorts_set(twi, 0); + + nrf_twi_address_set(twi, twi_address(address)); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STARTTX); } int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) { twi_info_t *twi_info = TWI_INFO(obj); - nrf_drv_twi_t const *twi = &m_twi_instances[TWI_IDX(obj)]; +#if DEVICE_I2C_ASYNCH + if (twi_info->active) { + return I2C_ERROR_BUS_BUSY; + } +#endif + twi_info->start_twi = false; + + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; + start_twi_write(twi, address); + + // Special case - transaction with no data. + // It can be used to check if a slave acknowledges the address. + if (length == 0) { + nrf_twi_event_t event; + if (stop) { + event = NRF_TWI_EVENT_STOPPED; + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STOP); + } else { + event = NRF_TWI_EVENT_SUSPENDED; + nrf_twi_event_clear(twi, event); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_SUSPEND); + } + uint32_t remaining_time = TIMEOUT_VALUE; + do { + if (nrf_twi_event_check(twi, event)) { + break; + } + } while (--remaining_time); - twi_info->transfer_finished = false; - ret_code_t ret_code = nrf_drv_twi_tx(twi, twi_address(address), - (uint8_t const *)data, length, (stop == 0)); - if (ret_code != NRF_SUCCESS) { - return 0; + uint32_t errorsrc = nrf_twi_errorsrc_get_and_clear(twi); + if (errorsrc & NRF_TWI_ERROR_ADDRESS_NACK) { + if (!stop) { + i2c_stop(obj); + } + return I2C_ERROR_NO_SLAVE; + } + + return (remaining_time ? 0 : I2C_ERROR_BUS_BUSY); } - while (!twi_info->transfer_finished) {} - return nrf_drv_twi_data_count_get(twi); + + int result = length; + do { + uint8_t byte_write_result = twi_byte_write(twi, (uint8_t)*data++); + if (byte_write_result != 1) { + if (byte_write_result == 0) { + // Check what kind of error has been signaled by TWI. + uint32_t errorsrc = nrf_twi_errorsrc_get_and_clear(twi); + if (errorsrc & NRF_TWI_ERROR_ADDRESS_NACK) { + result = I2C_ERROR_NO_SLAVE; + } else { + // Some other error - return the number of bytes that + // have been sent successfully. + result -= length; + } + } else { + result = I2C_ERROR_BUS_BUSY; + } + // Force STOP condition. + stop = 1; + break; + } + --length; + } while (length > 0); + + if (stop) { + (void)i2c_stop(obj); + } + + return result; } int i2c_byte_read(i2c_t *obj, int last) { - (void)obj; - (void)last; + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; + + if (last) { + nrf_twi_shorts_set(twi, NRF_TWI_SHORT_BB_STOP_MASK); + } + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); - return -1; // Not implemented. + uint32_t remaining_time = TIMEOUT_VALUE; + do { + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_RXDREADY)) { + nrf_twi_event_clear(twi, NRF_TWI_EVENT_RXDREADY); + return nrf_twi_rxd_get(twi); + } + if (nrf_twi_event_check(twi, NRF_TWI_EVENT_ERROR)) { + nrf_twi_event_clear(twi, NRF_TWI_EVENT_ERROR); + return I2C_ERROR_NO_SLAVE; + } + } while (--remaining_time); + + return I2C_ERROR_BUS_BUSY; } int i2c_byte_write(i2c_t *obj, int data) { - (void)obj; - (void)data; + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; + twi_info_t *twi_info = TWI_INFO(obj); + if (twi_info->start_twi) { + twi_info->start_twi = false; - return -1; // Not implemented. + if (data & 1) { + start_twi_read(twi, data); + } else { + start_twi_write(twi, data); + } + return 1; + } else { + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); + // 0 - TWI signaled error (NAK is the only possibility here) + // 1 - ACK received + // 2 - timeout (clock stretched for too long?) + return twi_byte_write(twi, (uint8_t)data); + } } #if DEVICE_I2C_ASYNCH - void i2c_transfer_asynch(i2c_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length, uint32_t address, uint32_t stop, uint32_t handler, uint32_t event, DMAUsage hint) { - (void)stop; (void)hint; - if (i2c_active(obj)) { - return; - } - if ((tx_length == 0) && (rx_length == 0)) { - return; - } - twi_info_t *twi_info = TWI_INFO(obj); - twi_info->events = 0; - twi_info->handler = (void (*)(void))handler; - twi_info->event_mask = event; + if (twi_info->active) { + return; + } + twi_info->active = true; + twi_info->events = 0; + twi_info->handler = (void (*)(void))handler; + twi_info->evt_mask = event; + twi_info->tx_length = tx_length; + twi_info->tx = tx; + twi_info->rx_length = rx_length; + twi_info->rx = rx; + twi_info->stop = stop; - uint8_t twi_addr = twi_address(address); - nrf_drv_twi_t const *twi = &m_twi_instances[TWI_IDX(obj)]; + NRF_TWI_Type *twi = m_twi_instances[TWI_IDX(obj)]; + + nrf_twi_event_clear(twi, NRF_TWI_EVENT_TXDSENT); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_RXDREADY); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_STOPPED); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_SUSPENDED); + nrf_twi_event_clear(twi, NRF_TWI_EVENT_ERROR); + (void)nrf_twi_errorsrc_get_and_clear(twi); - if ((tx_length > 0) && (rx_length == 0)) { - nrf_drv_twi_xfer_desc_t const xfer = - NRF_DRV_TWI_XFER_DESC_TX(twi_addr, (uint8_t *)tx, tx_length); - nrf_drv_twi_xfer(twi, &xfer, - stop ? 0 : NRF_DRV_TWI_FLAG_TX_NO_STOP); + nrf_twi_address_set(twi, twi_address(address)); + nrf_twi_task_trigger(twi, NRF_TWI_TASK_RESUME); + // TX only, or TX + RX (after a repeated start). + if (tx_length > 0) { + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STARTTX); + nrf_twi_txd_set(twi, *(twi_info->tx)); + ++(twi_info->tx); + // RX only. + } else if (rx_length > 0) { + start_asynch_rx(twi_info, twi); + // Both 'tx_length' and 'rx_length' are 0 - this case may be used + // to test if the slave is presentand ready for transfer (by just + // sending the address and checking if it is acknowledged). + } else { + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STARTTX); + if (stop) { + nrf_twi_task_trigger(twi, NRF_TWI_TASK_STOP); + } else { + nrf_twi_task_trigger(twi, NRF_TWI_TASK_SUSPEND); + nrf_twi_int_enable(twi, NRF_TWI_INT_SUSPENDED_MASK); + } + twi_info->events |= I2C_EVENT_TRANSFER_COMPLETE; } - else if ((tx_length == 0) && (rx_length > 0)) { - nrf_drv_twi_xfer_desc_t const xfer = - NRF_DRV_TWI_XFER_DESC_RX(twi_addr, rx, rx_length); - nrf_drv_twi_xfer(twi, &xfer, 0); - } - else if ((tx_length > 0) && (rx_length > 0)) { - nrf_drv_twi_xfer_desc_t const xfer = - NRF_DRV_TWI_XFER_DESC_TXRX(twi_addr, - (uint8_t *)tx, tx_length, rx, rx_length); - nrf_drv_twi_xfer(twi, &xfer, 0); - } + + nrf_twi_int_enable(twi, NRF_TWI_INT_TXDSENT_MASK | + NRF_TWI_INT_RXDREADY_MASK | + NRF_TWI_INT_STOPPED_MASK | + NRF_TWI_INT_ERROR_MASK); } uint32_t i2c_irq_handler_asynch(i2c_t *obj) { twi_info_t *twi_info = TWI_INFO(obj); - return (twi_info->events & twi_info->event_mask); + return (twi_info->events & twi_info->evt_mask); } uint8_t i2c_active(i2c_t *obj) { - nrf_drv_twi_t const *twi = &m_twi_instances[TWI_IDX(obj)]; - return nrf_drv_twi_is_busy(twi); + twi_info_t *twi_info = TWI_INFO(obj); + return twi_info->active; } void i2c_abort_asynch(i2c_t *obj) { i2c_reset(obj); } - #endif // DEVICE_I2C_ASYNCH #endif // DEVICE_I2C