Thiha Electronics / TFTLCD_8bit

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Dependents:   KL25Z_ILI9325

Fork of TFTLCD by Todor Todorov

Diff: ssd1289.h

Revision:
22:4c169297f374
Parent:
20:4bdca8d8dadc
Child:
24:ac6e35658037
--- a/ssd1289.h	Sat Jan 26 02:55:46 2013 +0000
+++ b/ssd1289.h	Sat Jan 26 04:36:46 2013 +0000
@@ -91,8 +91,10 @@
      * \param RD Pin for the RD signal. This line is not needed by the driver, so if you would like to
      *       use the pin on the mbed for something else, just pull-up the respective pin on the LCD high,
      *       and do not assign a value to this parameter when creating the controller instance.
+     * \param blType The backlight type, the default is to utilize the pin - if supplied - as a simple on/off switch
+     * \param defaultBacklightLevel If using PWM to control backlight, this would be the default brightness in percent after LCD initialization.
      */
-    SSD1289_LCD( PinName CS, PinName RESET, PinName RS, PinName WR, BusOut* DATA_PORT, PinName BL = NC, PinName RD = NC );
+    SSD1289_LCD( PinName CS, PinName RESET, PinName RS, PinName WR, BusOut* DATA_PORT, PinName BL = NC, PinName RD = NC, backlight_t blType = Constant, float defaultBackLightLevel = 1.0 );
     
     /** Initialize display.
      *