![](/media/cache/profiles/23d3743ad75e4470e7ff7129351a9541.jpg.50x50_q85.jpg)
Functional test program for the Proto Shield PCB Project
main.cpp
- Committer:
- TheFella
- Date:
- 2015-12-12
- Revision:
- 1:dafbcc661e0f
- Parent:
- 0:241b0b9f3b07
File content as of revision 1:dafbcc661e0f:
#include "mbed.h" #define PRESSED 0 #define OPEN 1 #define ON 1 #define OFF 0 //DigitalOut gpo(D0); //DigitalOut led(LED1); PwmOut g(LED_GREEN); PwmOut b(LED_BLUE); DigitalOut ledGrn(PTD4); DigitalOut ledYel(PTA12); DigitalOut ledRed(PTA4); AnalogIn speedControl(PTB0); Serial pc(USBTX, USBRX); //tx, rx 1st serial port connects to the PC for debug messages //Serial TempControllerComm(PTD3, PTD2); //tx, rx 2nd serial port connects to the temperature controller enum{ LOWERLIMIT, UPPERLIMIT}; // 0, 1 BusIn BCDswitch(PTD0, PTD1, PTD2, PTD3); BusIn pushButtons(PTD5, PTA13, PTC9, PTC8); //DigitalIn channelSelect(PTD1); int upperLimit; int lowerLimit; int currentChannel; int currentMode; void initializeSystem() { // BCDswitch.input(); //this is the equivalent of configuring a port for input BCDswitch.mode(PullNone); // disable the internal pullups on the port pushButtons.mode(PullNone); //channelSelect.mode(PullNone); //channelSelect is an individual pin configured for input for( int i = 0; i < 4; i++) { ledGrn = !ledGrn; ledYel = !ledYel; ledRed = !ledRed; wait(0.5); } } int main() { float delay = 1.0; b = 1; g = 1; initializeSystem(); while (true) { b = b - ( 0x0f / (~BCDswitch.read() & 0x0f)); g = g - ( 0x0f / (~BCDswitch.read() & 0x0f)); ledYel = !ledYel; delay = speedControl.read(); if( (~pushButtons.read()& 0x0f) < 15 && (~pushButtons.read()& 0x0f) > 7 ) ledRed = ON; else ledRed = OFF; if( (~pushButtons.read()& 0x0f) > 0 && (~pushButtons.read()& 0x0f) <= 8 ) ledGrn = ON; else ledGrn = OFF; pc.printf("\033[2J"); pc.printf("\033[H"); pc.printf("FRDM-KL25Z Shield Test\n\r"); pc.printf("\n\r"); pc.printf("Delay: \t\t%f\n\r", delay); pc.printf("Push Buttons: \t%x\n\r",(~pushButtons.read()& 0x0f) ); pc.printf("BCD: \t\t%x\n\r", ( ~BCDswitch.read() & 0x0f) ); pc.printf("\n\r"); pc.printf("LEDs:\n\r"); pc.printf("\tGreen: \t%d\n\r", ledGrn.read()); pc.printf("\tYellow: %d\n\r", ledYel.read()); pc.printf("\tRed: \t%d\n\r", ledRed.read()); wait(delay); } }