![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
OneNet_IoT_demo for ASC platform
Dependencies: Common_lib ESP8266 EdpKit_lib cJSON_lib driver_mbed_HP20x driver_mbed_TH02 wifi_example
Fork of mbed-os-example-esp8266 by
Diff: esp8266-driver/ESP8266/ESP8266.h
- Revision:
- 2:1dbc3aa8ae3a
- Parent:
- 1:b4a718e62e0b
diff -r b4a718e62e0b -r 1dbc3aa8ae3a esp8266-driver/ESP8266/ESP8266.h --- a/esp8266-driver/ESP8266/ESP8266.h Thu Jan 12 22:05:15 2017 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,213 +0,0 @@ -/* ESP8266Interface Example - * Copyright (c) 2015 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef ESP8266_H -#define ESP8266_H - -#include "ATParser.h" - -/** ESP8266Interface class. - This is an interface to a ESP8266 radio. - */ -class ESP8266 -{ -public: - ESP8266(PinName tx, PinName rx, bool debug=false); - - /** - * Startup the ESP8266 - * - * @param mode mode of WIFI 1-client, 2-host, 3-both - * @return true only if ESP8266 was setup correctly - */ - bool startup(int mode); - - /** - * Reset ESP8266 - * - * @return true only if ESP8266 resets successfully - */ - bool reset(void); - - /** - * Enable/Disable DHCP - * - * @param enabled DHCP enabled when true - * @param mode mode of DHCP 0-softAP, 1-station, 2-both - * @return true only if ESP8266 enables/disables DHCP successfully - */ - bool dhcp(bool enabled, int mode); - - /** - * Connect ESP8266 to AP - * - * @param ap the name of the AP - * @param passPhrase the password of AP - * @return true only if ESP8266 is connected successfully - */ - bool connect(const char *ap, const char *passPhrase); - - /** - * Disconnect ESP8266 from AP - * - * @return true only if ESP8266 is disconnected successfully - */ - bool disconnect(void); - - /** - * Get the IP address of ESP8266 - * - * @return null-teriminated IP address or null if no IP address is assigned - */ - const char *getIPAddress(void); - - /** - * Get the MAC address of ESP8266 - * - * @return null-terminated MAC address or null if no MAC address is assigned - */ - const char *getMACAddress(void); - - /** Get the local gateway - * - * @return Null-terminated representation of the local gateway - * or null if no network mask has been recieved - */ - const char *getGateway(); - - /** Get the local network mask - * - * @return Null-terminated representation of the local network mask - * or null if no network mask has been recieved - */ - const char *getNetmask(); - - /* Return RSSI for active connection - * - * @return Measured RSSI - */ - int8_t getRSSI(); - - /** - * Check if ESP8266 is conenected - * - * @return true only if the chip has an IP address - */ - bool isConnected(void); - - /** Scan for available networks - * - * @param ap Pointer to allocated array to store discovered AP - * @param limit Size of allocated @a res array, or 0 to only count available AP - * @return Number of entries in @a res, or if @a count was 0 number of available networks, negative on error - * see @a nsapi_error - */ - int scan(WiFiAccessPoint *res, unsigned limit); - - /** - * Open a socketed connection - * - * @param type the type of socket to open "UDP" or "TCP" - * @param id id to give the new socket, valid 0-4 - * @param port port to open connection with - * @param addr the IP address of the destination - * @return true only if socket opened successfully - */ - bool open(const char *type, int id, const char* addr, int port); - - /** - * Sends data to an open socket - * - * @param id id of socket to send to - * @param data data to be sent - * @param amount amount of data to be sent - max 1024 - * @return true only if data sent successfully - */ - bool send(int id, const void *data, uint32_t amount); - - /** - * Receives data from an open socket - * - * @param id id to receive from - * @param data placeholder for returned information - * @param amount number of bytes to be received - * @return the number of bytes received - */ - int32_t recv(int id, void *data, uint32_t amount); - - /** - * Closes a socket - * - * @param id id of socket to close, valid only 0-4 - * @return true only if socket is closed successfully - */ - bool close(int id); - - /** - * Allows timeout to be changed between commands - * - * @param timeout_ms timeout of the connection - */ - void setTimeout(uint32_t timeout_ms); - - /** - * Checks if data is available - */ - bool readable(); - - /** - * Checks if data can be written - */ - bool writeable(); - - /** - * Attach a function to call whenever network state has changed - * - * @param func A pointer to a void function, or 0 to set as none - */ - void attach(Callback<void()> func); - - /** - * Attach a function to call whenever network state has changed - * - * @param obj pointer to the object to call the member function on - * @param method pointer to the member function to call - */ - template <typename T, typename M> - void attach(T *obj, M method) { - attach(Callback<void()>(obj, method)); - } - -private: - BufferedSerial _serial; - ATParser _parser; - - struct packet { - struct packet *next; - int id; - uint32_t len; - // data follows - } *_packets, **_packets_end; - void _packet_handler(); - bool recv_ap(nsapi_wifi_ap_t *ap); - - char _ip_buffer[16]; - char _gateway_buffer[16]; - char _netmask_buffer[16]; - char _mac_buffer[18]; -}; - -#endif