Mathew Swabey
Updated
Diff: mbed_config.h
- Revision:
- 0:e7fbe82c5f6b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_config.h Sat Jan 05 15:02:12 2019 +0000
@@ -0,0 +1,232 @@
+/*
+ * mbed SDK
+ * Copyright (c) 2017 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+// Automatically generated configuration file.
+// DO NOT EDIT, content will be overwritten.
+
+#ifndef __MBED_CONFIG_DATA__
+#define __MBED_CONFIG_DATA__
+
+// Configuration parameters
+#define CLOCK_SOURCE USE_PLL_HSE_EXTC|USE_PLL_HSI // set by target:NUCLEO_F429ZI
+#define CLOCK_SOURCE_USB 1 // set by target:NUCLEO_F429ZI
+#define KVSTORE_ENABLED 1 // set by library:kvstore
+#define LPTICKER_DELAY_TICKS 1 // set by target:FAMILY_STM32
+#define MBED_CONF_ATMEL_RF_ASSUME_SPACED_SPI 1 // set by library:atmel-rf[STM]
+#define MBED_CONF_ATMEL_RF_FULL_SPI_SPEED 7500000 // set by library:atmel-rf
+#define MBED_CONF_ATMEL_RF_FULL_SPI_SPEED_BYTE_SPACING 250 // set by library:atmel-rf
+#define MBED_CONF_ATMEL_RF_IRQ_THREAD_STACK_SIZE 1024 // set by library:atmel-rf
+#define MBED_CONF_ATMEL_RF_LOW_SPI_SPEED 3750000 // set by library:atmel-rf
+#define MBED_CONF_ATMEL_RF_PROVIDE_DEFAULT 0 // set by library:atmel-rf
+#define MBED_CONF_ATMEL_RF_USE_SPI_SPACING_API 0 // set by library:atmel-rf
+#define MBED_CONF_CELLULAR_DEBUG_AT 0 // set by library:cellular
+#define MBED_CONF_CELLULAR_RANDOM_MAX_START_DELAY 0 // set by library:cellular
+#define MBED_CONF_CELLULAR_USE_APN_LOOKUP 1 // set by library:cellular
+#define MBED_CONF_DRIVERS_UART_SERIAL_RXBUF_SIZE 256 // set by library:drivers
+#define MBED_CONF_DRIVERS_UART_SERIAL_TXBUF_SIZE 256 // set by library:drivers
+#define MBED_CONF_ESP8266_DEBUG 0 // set by library:esp8266
+#define MBED_CONF_ESP8266_PROVIDE_DEFAULT 0 // set by library:esp8266
+#define MBED_CONF_ESP8266_SOCKET_BUFSIZE 8192 // set by library:esp8266
+#define MBED_CONF_EVENTS_PRESENT 1 // set by library:events
+#define MBED_CONF_EVENTS_SHARED_DISPATCH_FROM_APPLICATION 0 // set by library:events
+#define MBED_CONF_EVENTS_SHARED_EVENTSIZE 256 // set by library:events
+#define MBED_CONF_EVENTS_SHARED_HIGHPRIO_EVENTSIZE 256 // set by library:events
+#define MBED_CONF_EVENTS_SHARED_HIGHPRIO_STACKSIZE 1024 // set by library:events
+#define MBED_CONF_EVENTS_SHARED_STACKSIZE 1024 // set by library:events
+#define MBED_CONF_EVENTS_USE_LOWPOWER_TIMER_TICKER 0 // set by library:events
+#define MBED_CONF_FILESYSTEM_PRESENT 1 // set by library:filesystem
+#define MBED_CONF_LORA_ADR_ON 1 // set by library:lora
+#define MBED_CONF_LORA_APPLICATION_EUI {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} // set by library:lora
+#define MBED_CONF_LORA_APPLICATION_KEY {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} // set by library:lora
+#define MBED_CONF_LORA_APPSKEY {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} // set by library:lora
+#define MBED_CONF_LORA_APP_PORT 15 // set by library:lora
+#define MBED_CONF_LORA_AUTOMATIC_UPLINK_MESSAGE 1 // set by library:lora
+#define MBED_CONF_LORA_DEVICE_ADDRESS 0x00000000 // set by library:lora
+#define MBED_CONF_LORA_DEVICE_EUI {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} // set by library:lora
+#define MBED_CONF_LORA_DOWNLINK_PREAMBLE_LENGTH 5 // set by library:lora
+#define MBED_CONF_LORA_DUTY_CYCLE_ON 1 // set by library:lora
+#define MBED_CONF_LORA_DUTY_CYCLE_ON_JOIN 1 // set by library:lora
+#define MBED_CONF_LORA_FSB_MASK {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x00FF} // set by library:lora
+#define MBED_CONF_LORA_FSB_MASK_CHINA {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF} // set by library:lora
+#define MBED_CONF_LORA_LBT_ON 0 // set by library:lora
+#define MBED_CONF_LORA_MAX_SYS_RX_ERROR 10 // set by library:lora
+#define MBED_CONF_LORA_NB_TRIALS 12 // set by library:lora
+#define MBED_CONF_LORA_NWKSKEY {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} // set by library:lora
+#define MBED_CONF_LORA_OVER_THE_AIR_ACTIVATION 1 // set by library:lora
+#define MBED_CONF_LORA_PHY EU868 // set by library:lora
+#define MBED_CONF_LORA_PUBLIC_NETWORK 1 // set by library:lora
+#define MBED_CONF_LORA_TX_MAX_SIZE 64 // set by library:lora
+#define MBED_CONF_LORA_UPLINK_PREAMBLE_LENGTH 8 // set by library:lora
+#define MBED_CONF_LWIP_ADDR_TIMEOUT 5 // set by library:lwip
+#define MBED_CONF_LWIP_ADDR_TIMEOUT_MODE 1 // set by library:lwip
+#define MBED_CONF_LWIP_DEBUG_ENABLED 0 // set by library:lwip
+#define MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE 512 // set by library:lwip
+#define MBED_CONF_LWIP_ENABLE_PPP_TRACE 0 // set by library:lwip
+#define MBED_CONF_LWIP_ETHERNET_ENABLED 1 // set by library:lwip
+#define MBED_CONF_LWIP_IPV4_ENABLED 1 // set by library:lwip
+#define MBED_CONF_LWIP_IPV6_ENABLED 0 // set by library:lwip
+#define MBED_CONF_LWIP_IP_VER_PREF 4 // set by library:lwip
+#define MBED_CONF_LWIP_MEM_SIZE 25600 // set by library:lwip[STM]
+#define MBED_CONF_LWIP_PPP_THREAD_STACKSIZE 768 // set by library:lwip
+#define MBED_CONF_LWIP_SOCKET_MAX 4 // set by library:lwip
+#define MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE 1200 // set by library:lwip
+#define MBED_CONF_LWIP_TCP_ENABLED 1 // set by library:lwip
+#define MBED_CONF_LWIP_TCP_SERVER_MAX 4 // set by library:lwip
+#define MBED_CONF_LWIP_TCP_SOCKET_MAX 4 // set by library:lwip
+#define MBED_CONF_LWIP_UDP_SOCKET_MAX 4 // set by library:lwip
+#define MBED_CONF_LWIP_USE_MBED_TRACE 0 // set by library:lwip
+#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_CHANNEL 0 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_CHANNEL_MASK 0x7fff800 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_CHANNEL_PAGE 0 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_DEVICE_TYPE NET_6LOWPAN_ROUTER // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_PANID_FILTER 0xffff // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_PSK_KEY {0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf} // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_PSK_KEY_ID 1 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_SECURITY_MODE NONE // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_SEC_LEVEL 5 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_HEAP_SIZE 32500 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_HEAP_STAT_INFO NULL // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_CHANNEL 22 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_CHANNEL_MASK 0x7fff800 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_CHANNEL_PAGE 0 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_COMMISSIONING_DATASET_TIMESTAMP 0x10000 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_EXTENDED_PANID {0xf1, 0xb5, 0xa1, 0xb2,0xc4, 0xd5, 0xa1, 0xbd } // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_ML_PREFIX {0xfd, 0x0, 0x0d, 0xb8, 0x0, 0x0, 0x0, 0x0} // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_NETWORK_NAME "Thread Network" // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_PANID 0x0700 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_PSKC {0xc8, 0xa6, 0x2e, 0xae, 0xf3, 0x68, 0xf3, 0x46, 0xa9, 0x9e, 0x57, 0x85, 0x98, 0x9d, 0x1c, 0xd0} // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_THREAD_DEVICE_TYPE MESH_DEVICE_TYPE_THREAD_ROUTER // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_THREAD_MASTER_KEY {0x10, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff} // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_THREAD_PSKD "ABCDEFGH" // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_THREAD_SECURITY_POLICY 255 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_THREAD_USE_STATIC_LINK_CONFIG 1 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_USE_MALLOC_FOR_HEAP 0 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_WISUN_BC_CHANNEL_FUNCTION 255 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_WISUN_BC_DWELL_INTERVAL 0 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_WISUN_BC_FIXED_CHANNEL 0xffff // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_WISUN_BC_INTERVAL 0 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_WISUN_NETWORK_NAME "NETWORK_NAME" // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_WISUN_OPERATING_CLASS 255 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_WISUN_OPERATING_MODE 255 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_WISUN_REGULATORY_DOMAIN 3 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_WISUN_UC_CHANNEL_FUNCTION 255 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_WISUN_UC_DWELL_INTERVAL 0 // set by library:mbed-mesh-api
+#define MBED_CONF_MBED_MESH_API_WISUN_UC_FIXED_CHANNEL 0xffff // set by library:mbed-mesh-api
+#define MBED_CONF_MCR20A_PROVIDE_DEFAULT 0 // set by library:mcr20a
+#define MBED_CONF_NANOSTACK_CONFIGURATION nanostack_full // set by library:nanostack
+#define MBED_CONF_NANOSTACK_HAL_CRITICAL_SECTION_USABLE_FROM_INTERRUPT 0 // set by library:nanostack-hal
+#define MBED_CONF_NANOSTACK_HAL_EVENT_LOOP_DISPATCH_FROM_APPLICATION 0 // set by library:nanostack-hal
+#define MBED_CONF_NANOSTACK_HAL_EVENT_LOOP_THREAD_STACK_SIZE 6144 // set by library:nanostack-hal
+#define MBED_CONF_NANOSTACK_HAL_EVENT_LOOP_USE_MBED_EVENTS 0 // set by library:nanostack-hal
+#define MBED_CONF_NANOSTACK_HAL_NVM_CFSTORE 0 // set by library:nanostack-hal
+#define MBED_CONF_NSAPI_DEFAULT_MESH_TYPE THREAD // set by library:nsapi
+#define MBED_CONF_NSAPI_DEFAULT_STACK LWIP // set by library:nsapi
+#define MBED_CONF_NSAPI_DEFAULT_WIFI_SECURITY NONE // set by library:nsapi
+#define MBED_CONF_NSAPI_DNS_CACHE_SIZE 3 // set by library:nsapi
+#define MBED_CONF_NSAPI_DNS_RESPONSE_WAIT_TIME 5000 // set by library:nsapi
+#define MBED_CONF_NSAPI_DNS_RETRIES 0 // set by library:nsapi
+#define MBED_CONF_NSAPI_DNS_TOTAL_ATTEMPTS 3 // set by library:nsapi
+#define MBED_CONF_NSAPI_PRESENT 1 // set by library:nsapi
+#define MBED_CONF_NSAPI_SOCKET_STATS_ENABLE 0 // set by library:nsapi
+#define MBED_CONF_NSAPI_SOCKET_STATS_MAX_COUNT 10 // set by library:nsapi
+#define MBED_CONF_PLATFORM_CRASH_CAPTURE_ENABLED 1 // set by library:platform[NUCLEO_F429ZI]
+#define MBED_CONF_PLATFORM_CTHUNK_COUNT_MAX 8 // set by library:platform
+#define MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE 9600 // set by library:platform
+#define MBED_CONF_PLATFORM_ERROR_ALL_THREADS_INFO 0 // set by library:platform
+#define MBED_CONF_PLATFORM_ERROR_DECODE_HTTP_URL_STR "\nFor more info, visit: https://armmbed.github.io/mbedos-error/?error=0x%08X" // set by library:platform
+#define MBED_CONF_PLATFORM_ERROR_FILENAME_CAPTURE_ENABLED 0 // set by library:platform
+#define MBED_CONF_PLATFORM_ERROR_HIST_ENABLED 0 // set by library:platform
+#define MBED_CONF_PLATFORM_ERROR_HIST_SIZE 4 // set by library:platform
+#define MBED_CONF_PLATFORM_ERROR_REBOOT_MAX 1 // set by library:platform
+#define MBED_CONF_PLATFORM_FATAL_ERROR_AUTO_REBOOT_ENABLED 1 // set by library:platform[NUCLEO_F429ZI]
+#define MBED_CONF_PLATFORM_FORCE_NON_COPYABLE_ERROR 0 // set by library:platform
+#define MBED_CONF_PLATFORM_MAX_ERROR_FILENAME_LEN 16 // set by library:platform
+#define MBED_CONF_PLATFORM_POLL_USE_LOWPOWER_TIMER 0 // set by library:platform
+#define MBED_CONF_PLATFORM_STDIO_BAUD_RATE 9600 // set by library:platform
+#define MBED_CONF_PLATFORM_STDIO_BUFFERED_SERIAL 0 // set by library:platform
+#define MBED_CONF_PLATFORM_STDIO_CONVERT_NEWLINES 0 // set by library:platform
+#define MBED_CONF_PLATFORM_STDIO_CONVERT_TTY_NEWLINES 0 // set by library:platform
+#define MBED_CONF_PLATFORM_STDIO_FLUSH_AT_EXIT 1 // set by library:platform
+#define MBED_CONF_PLATFORM_USE_MPU 1 // set by library:platform
+#define MBED_CONF_PPP_CELL_IFACE_APN_LOOKUP 1 // set by library:ppp-cell-iface
+#define MBED_CONF_PPP_CELL_IFACE_AT_PARSER_BUFFER_SIZE 256 // set by library:ppp-cell-iface
+#define MBED_CONF_PPP_CELL_IFACE_AT_PARSER_TIMEOUT 8000 // set by library:ppp-cell-iface
+#define MBED_CONF_PPP_CELL_IFACE_BAUD_RATE 115200 // set by library:ppp-cell-iface
+#define MBED_CONF_RTOS_IDLE_THREAD_STACK_SIZE 512 // set by library:rtos
+#define MBED_CONF_RTOS_IDLE_THREAD_STACK_SIZE_TICKLESS_EXTRA 256 // set by library:rtos
+#define MBED_CONF_RTOS_MAIN_THREAD_STACK_SIZE 4096 // set by library:rtos
+#define MBED_CONF_RTOS_PRESENT 1 // set by library:rtos
+#define MBED_CONF_RTOS_THREAD_STACK_SIZE 4096 // set by library:rtos
+#define MBED_CONF_RTOS_TIMER_THREAD_STACK_SIZE 768 // set by library:rtos
+#define MBED_CONF_S2LP_PROVIDE_DEFAULT 0 // set by library:s2lp
+#define MBED_CONF_STORAGE_DEFAULT_KV kv // set by library:storage
+#define MBED_CONF_STORAGE_FILESYSTEM_BLOCKDEVICE default // set by library:storage_filesystem
+#define MBED_CONF_STORAGE_FILESYSTEM_EXTERNAL_BASE_ADDRESS 0 // set by library:storage_filesystem
+#define MBED_CONF_STORAGE_FILESYSTEM_EXTERNAL_SIZE 0 // set by library:storage_filesystem
+#define MBED_CONF_STORAGE_FILESYSTEM_FILESYSTEM default // set by library:storage_filesystem
+#define MBED_CONF_STORAGE_FILESYSTEM_FOLDER_PATH kvstore // set by library:storage_filesystem
+#define MBED_CONF_STORAGE_FILESYSTEM_INTERNAL_BASE_ADDRESS 0 // set by library:storage_filesystem
+#define MBED_CONF_STORAGE_FILESYSTEM_MOUNT_POINT kv // set by library:storage_filesystem
+#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_BLOCKDEVICE default // set by library:storage_filesystem_no_rbp
+#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_EXTERNAL_BASE_ADDRESS 0 // set by library:storage_filesystem_no_rbp
+#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_EXTERNAL_SIZE 0 // set by library:storage_filesystem_no_rbp
+#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_FILESYSTEM default // set by library:storage_filesystem_no_rbp
+#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_FOLDER_PATH kvstore // set by library:storage_filesystem_no_rbp
+#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_MOUNT_POINT kv // set by library:storage_filesystem_no_rbp
+#define MBED_CONF_STORAGE_FILESYSTEM_RBP_INTERNAL_SIZE 0 // set by library:storage_filesystem
+#define MBED_CONF_STORAGE_FILESYSTEM_RBP_NUMBER_OF_ENTRIES 64 // set by library:storage_filesystem
+#define MBED_CONF_STORAGE_STORAGE_TYPE TDB_EXTERNAL // set by library:storage
+#define MBED_CONF_STORAGE_TDB_EXTERNAL_BLOCKDEVICE default // set by library:storage_tdb_external
+#define MBED_CONF_STORAGE_TDB_EXTERNAL_EXTERNAL_BASE_ADDRESS 0 // set by library:storage_tdb_external
+#define MBED_CONF_STORAGE_TDB_EXTERNAL_EXTERNAL_SIZE 0 // set by library:storage_tdb_external
+#define MBED_CONF_STORAGE_TDB_EXTERNAL_INTERNAL_BASE_ADDRESS 0 // set by library:storage_tdb_external
+#define MBED_CONF_STORAGE_TDB_EXTERNAL_NO_RBP_BLOCKDEVICE default // set by library:storage_tdb_external_no_rbp
+#define MBED_CONF_STORAGE_TDB_EXTERNAL_NO_RBP_EXTERNAL_BASE_ADDRESS 0 // set by library:storage_tdb_external_no_rbp
+#define MBED_CONF_STORAGE_TDB_EXTERNAL_NO_RBP_EXTERNAL_SIZE 0 // set by library:storage_tdb_external_no_rbp
+#define MBED_CONF_STORAGE_TDB_EXTERNAL_RBP_INTERNAL_SIZE 0 // set by library:storage_tdb_external
+#define MBED_CONF_STORAGE_TDB_EXTERNAL_RBP_NUMBER_OF_ENTRIES 64 // set by library:storage_tdb_external
+#define MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_BASE_ADDRESS 0 // set by library:storage_tdb_internal
+#define MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_SIZE 0 // set by library:storage_tdb_internal
+#define MBED_CONF_TARGET_BOOT_STACK_SIZE 0x400 // set by library:rtos[*]
+#define MBED_CONF_TARGET_DEEP_SLEEP_LATENCY 0 // set by target:Target
+#define MBED_CONF_TARGET_LPTICKER_LPTIM_CLOCK 1 // set by target:FAMILY_STM32
+#define MBED_CONF_TARGET_LPUART_CLOCK_SOURCE USE_LPUART_CLK_LSE|USE_LPUART_CLK_PCLK1 // set by target:FAMILY_STM32
+#define MBED_CONF_TARGET_LSE_AVAILABLE 1 // set by target:FAMILY_STM32
+#define MBED_CONF_TARGET_NETWORK_DEFAULT_INTERFACE_TYPE ETHERNET // set by target:NUCLEO_F429ZI
+#define MBED_LFS_BLOCK_SIZE 512 // set by library:littlefs
+#define MBED_LFS_ENABLE_INFO 0 // set by library:littlefs
+#define MBED_LFS_INTRINSICS 1 // set by library:littlefs
+#define MBED_LFS_LOOKAHEAD 512 // set by library:littlefs
+#define MBED_LFS_PROG_SIZE 64 // set by library:littlefs
+#define MBED_LFS_READ_SIZE 64 // set by library:littlefs
+#define MEM_ALLOC malloc // set by library:mbed-trace
+#define MEM_FREE free // set by library:mbed-trace
+#define MPU_ROM_END 0x0fffffff // set by target:Target
+#define NSAPI_PPP_AVAILABLE 0 // set by library:lwip
+#define NSAPI_PPP_IPV4_AVAILABLE 1 // set by library:lwip
+#define NSAPI_PPP_IPV6_AVAILABLE 0 // set by library:lwip
+#define NVSTORE_ENABLED 1 // set by library:nvstore
+#define NVSTORE_MAX_KEYS 16 // set by library:nvstore
+#define STM32_D11_SPI_ETHERNET_PIN PA_7 // set by target:NUCLEO_F429ZI
+// Macros
+#define MBEDTLS_CIPHER_MODE_CTR // defined by library:SecureStore
+#define MBEDTLS_CMAC_C // defined by library:SecureStore
+#define NS_USE_EXTERNAL_MBED_TLS // defined by library:nanostack
+#define UNITY_INCLUDE_CONFIG_H // defined by library:utest
+#define _RTE_ // defined by library:rtos
+
+#endif