Natthaphon Sudadech
/
PJ04_MASTER
+mp3
Fork of VS1053 by
Diff: vs10xx.cpp
- Revision:
- 0:58524d569dfd
diff -r 000000000000 -r 58524d569dfd vs10xx.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/vs10xx.cpp Fri Dec 02 19:37:00 2016 +0000 @@ -0,0 +1,148 @@ +/** \file vs10xx.c + * Functions for interfacing with the mp3 player chip. + * \todo safe rewind + * \todo VS1003 WMA "wma-bytes-left" variable adjustment at ff/rew + */ +#include "vs10xx.h" + +/** Constructor of class VS1053. */ +vs10xx::vs10xx(PinName MOSI, PinName MISO, PinName SCLK, PinName XCS, + PinName XDCS,PinName DREQ, PinName XRESET) + : + _spi(MOSI,MISO,SCLK), + _XCS(XCS), + _XDCS(XDCS), + _DREQ(DREQ), + _XRESET(XRESET) +{ + _XCS = 1; + _XDCS = 1; + _XRESET = 1; +} + +/** Write the 16-bit value to VS10xx register*/ +void vs10xx::writeRegister(unsigned char addressbyte,unsigned int value) +{ + _XCS = 1; + while (!_DREQ); + _XCS = 0; + _spi.write(VS_WRITE_COMMAND); + _spi.write(addressbyte); + _spi.write(value >> 8); + _spi.write(value & 0xFF); + _XCS = 1; +} + +/** Read the 16-bit value of a VS10xx register */ +unsigned int vs10xx::readRegister (unsigned char addressbyte) +{ + unsigned int resultvalue = 0; + + _XCS = 1; + while (!_DREQ); + _XCS = 0; + _spi.write(VS_READ_COMMAND); + _spi.write((addressbyte)); + resultvalue = _spi.write(0XFF) << 8; + resultvalue |= _spi.write(0XFF); + _XCS = 1; + return resultvalue; +} + +/** write data to VS10xx */ +void vs10xx::writeData(unsigned char *databuf,unsigned char n) +{ + _XDCS = 1; + _XDCS = 0; + while (!_DREQ); + while (n--) + { + _spi.write(*databuf++); + } + _XDCS = 1; +} + +void vs10xx::setFreq(int freq) +{ + _spi.frequency(freq); //set freq for speed +} + +void vs10xx::setVolume(unsigned char vol) +{ + writeRegister(SPI_VOL, vol*0x101); //Set volume level +} + +/** Soft Reset of VS10xx (Between songs) */ +void vs10xx::softReset() +{ + _spi.frequency(1000000); //low speed + + /* Soft Reset of VS10xx */ + writeRegister(SPI_MODE, 0x0804); /* Newmode, Reset, No L1-2 */ + + wait_ms(2); //delay + while(!_DREQ); + + /* A quick sanity check: write to two registers, then test if we + get the same results. Note that if you use a too high SPI + speed, the MSB is the most likely to fail when read again. */ + writeRegister(SPI_HDAT0, 0xABAD); + writeRegister(SPI_HDAT1, 0x1DEA); + if (readRegister(SPI_HDAT0) != 0xABAD || readRegister(SPI_HDAT1) != 0x1DEA) { + printf("There is something wrong with VS10xx\n"); + } + + writeRegister(SPI_CLOCKF,0XC000); //Set the clock + writeRegister(SPI_AUDATA,0xbb81); //samplerate 48k,stereo + writeRegister(SPI_BASS, 0x0055); //set accent + writeRegister(SPI_VOL, 0x4040); //Set volume level + + while (!_DREQ); + +} + +/** Reset VS10xx */ +void vs10xx::reset(){ + + _XRESET = 0; + wait_ms(2); //it is a must + + /* Send dummy SPI byte to initialize SPI */ + _spi.write(0xFF); + + /* Un-reset VS10XX chip */ + _XCS = 1; + _XDCS = 1; + _XRESET = 1; + + softReset(); //vs10xx soft reset. + + // printf("\r\nVS10xx Init\r\n"); +} + +/* Loads a plugin. */ +void vs10xx::loadPlugin(const unsigned short *plugin,int length) { + int i = 0; + while (i<length) { + unsigned short addr, n, val; + addr = plugin[i++]; + n = plugin[i++]; + if (n & 0x8000U) { /* RLE run, replicate n samples */ + n &= 0x7FFF; + val = plugin[i++]; + while (n--) { + writeRegister(addr, val); + } + } else { /* Copy run, copy n samples */ + while (n--) { + val = plugin[i++]; + writeRegister(addr, val); + } + } + } +} + + + + +