Steve Kim
/
mbed-src
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
mbed-src
by 
mbed official
targets/hal/TARGET_NXP/TARGET_LPC43XX/PinNames.h
- Committer:
- mbed_official
- Date:
- 2014-07-15
- Revision:
- 256:76fd9a263045
- Parent:
- 113:65a335a675de
File content as of revision 256:76fd9a263045:
/* mbed Microcontroller Library
* Copyright (c) 2006-2013 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
#define PORT_SHIFT 5
#define NO_GPIO 15
// On the LPC43xx the MCU pin name and the GPIO pin name are not the same.
// Encode SCU and GPIO offsets as a pin identifier
#define MBED_PIN(group, num, port, pin) ((SCU_OFF(group,num) << 16) + GPIO_OFF(port,pin))
// Decode pin identifier into register, port and pin values
#define MBED_SCU_REG(MBED_PIN) (LPC_SCU_BASE + (MBED_PIN >> 16))
#define MBED_GPIO_REG(MBED_PIN) (LPC_GPIO_PORT_BASE + 0x2000 + ((MBED_PIN >> (PORT_SHIFT - 2)) & 0x0000003C))
#define MBED_GPIO_PORT(MBED_PIN) ((MBED_PIN >> PORT_SHIFT) & 0x0000000F)
#define MBED_GPIO_PIN(MBED_PIN) (MBED_PIN & 0x0000001F)
typedef enum {
// LPC43xx Pin Names
// All pins defined. Package determines which are available.
// LBGA256 TFBGA180 TFBGA100 LQFP208 LQFP144
// GPIO0 [15:0] [15:0] [15:6] [15:0] [15:0]
// [4:0]
// GPIO1 [15:0] [15:0] [15:0] [15:0] [15:0]
// GPIO2 [15:0] [15:0] [15:0] [15:0]
// GPIO3 [15:0] [15:0] [7] [15:0] [15:0]
// [5:3]
// [1:0]
// GPIO4 [15:0] [15:0] [15:0] [11]
// GPIO5 [26:0] [26:0] [11:0] [25:0] [18]
// [16:0]
// GPIO6 [30:0] [30:28] [30:20]
// [26:25] [5:0]
// GPIO7 [25:0] [4:0] [25:23]
// [21:17]
// --- --- --- --- ---
// Total 164 117 49 131 83
// Groups 0x00 - 0x0F : Digital pins
// * Digital pins support up to 8 functions
// Use func=0 for GPIO0-GPIO4, func=4 for GPIO5-GPIO7
// * High-drive pins default to 4 mA but can support 8, 14, 20 mA
P0_0 = MBED_PIN(0x00, 0, 0, 0), // GPIO0[0]
P0_1 = MBED_PIN(0x00, 1, 0, 1), // GPIO0[1]
P1_0 = MBED_PIN(0x01, 0, 0, 4), // GPIO0[4]
P1_1 = MBED_PIN(0x01, 1, 0, 8), // GPIO0[8]
P1_2 = MBED_PIN(0x01, 2, 0, 9), // GPIO0[9]
P1_3 = MBED_PIN(0x01, 3, 0, 10), // GPIO0[10]
P1_4 = MBED_PIN(0x01, 4, 0, 11), // GPIO0[11]
P1_5 = MBED_PIN(0x01, 5, 1, 8), // GPIO1[8]
P1_6 = MBED_PIN(0x01, 6, 1, 9), // GPIO1[9]
P1_7 = MBED_PIN(0x01, 7, 1, 0), // GPIO1[0]
P1_8 = MBED_PIN(0x01, 8, 1, 1), // GPIO1[1]
P1_9 = MBED_PIN(0x01, 9, 1, 2), // GPIO1[2]
P1_10 = MBED_PIN(0x01, 10, 1, 3), // GPIO1[3]
P1_11 = MBED_PIN(0x01, 11, 1, 4), // GPIO1[4]
P1_12 = MBED_PIN(0x01, 12, 1, 5), // GPIO1[5]
P1_13 = MBED_PIN(0x01, 13, 1, 6), // GPIO1[6]
P1_14 = MBED_PIN(0x01, 14, 1, 7), // GPIO1[7]
P1_15 = MBED_PIN(0x01, 15, 0, 2), // GPIO0[2]
P1_16 = MBED_PIN(0x01, 16, 0, 3), // GPIO0[3]
P1_17 = MBED_PIN(0x01, 17, 0, 12), // GPIO0[12] high-drive
P1_18 = MBED_PIN(0x01, 18, 0, 13), // GPIO0[13]
P1_19 = MBED_PIN(0x01, 19, NO_GPIO, 0),
P1_20 = MBED_PIN(0x01, 20, 0, 15), // GPIO0[15]
P2_0 = MBED_PIN(0x02, 0, 5, 0), // GPIO5[0]
P2_1 = MBED_PIN(0x02, 1, 5, 1), // GPIO5[1]
P2_2 = MBED_PIN(0x02, 2, 5, 2), // GPIO5[2]
P2_3 = MBED_PIN(0x02, 3, 5, 3), // GPIO5[3] high-drive
P2_4 = MBED_PIN(0x02, 4, 5, 4), // GPIO5[4] high-drive
P2_5 = MBED_PIN(0x02, 5, 5, 5), // GPIO5[5] high-drive
P2_6 = MBED_PIN(0x02, 6, 5, 6), // GPIO5[6]
P2_7 = MBED_PIN(0x02, 7, 0, 7), // GPIO0[7]
P2_8 = MBED_PIN(0x02, 8, 5, 7), // GPIO5[7]
P2_9 = MBED_PIN(0x02, 9, 1, 10), // GPIO1[10]
P2_10 = MBED_PIN(0x02, 10, 0, 14), // GPIO0[14]
P2_11 = MBED_PIN(0x02, 11, 1, 11), // GPIO1[11]
P2_12 = MBED_PIN(0x02, 12, 1, 12), // GPIO1[12]
P2_13 = MBED_PIN(0x02, 13, 1, 13), // GPIO1[13]
P3_0 = MBED_PIN(0x03, 0, NO_GPIO, 0),
P3_1 = MBED_PIN(0x03, 1, 5, 8), // GPIO5[8]
P3_2 = MBED_PIN(0x03, 2, 5, 9), // GPIO5[9]
P3_3 = MBED_PIN(0x03, 3, NO_GPIO, 0),
P3_4 = MBED_PIN(0x03, 4, 1, 14), // GPIO1[14]
P3_5 = MBED_PIN(0x03, 5, 1, 15), // GPIO1[15]
P3_6 = MBED_PIN(0x03, 6, 0, 6), // GPIO0[6]
P3_7 = MBED_PIN(0x03, 7, 5, 10), // GPIO5[10]
P3_8 = MBED_PIN(0x03, 8, 5, 11), // GPIO5[11]
P4_0 = MBED_PIN(0x04, 0, 2, 0), // GPIO2[0]
P4_1 = MBED_PIN(0x04, 1, 2, 1), // GPIO2[1]
P4_2 = MBED_PIN(0x04, 2, 2, 2), // GPIO2[2]
P4_3 = MBED_PIN(0x04, 3, 2, 3), // GPIO2[3]
P4_4 = MBED_PIN(0x04, 4, 2, 4), // GPIO2[4]
P4_5 = MBED_PIN(0x04, 5, 2, 5), // GPIO2[5]
P4_6 = MBED_PIN(0x04, 6, 2, 6), // GPIO2[6]
P4_7 = MBED_PIN(0x04, 7, NO_GPIO, 0),
P4_8 = MBED_PIN(0x04, 8, 5, 12), // GPIO5[12]
P4_9 = MBED_PIN(0x04, 9, 5, 13), // GPIO5[13]
P4_10 = MBED_PIN(0x04, 10, 5, 14), // GPIO5[14]
P5_0 = MBED_PIN(0x05, 0, 2, 9), // GPIO2[9]
P5_1 = MBED_PIN(0x05, 1, 2, 10), // GPIO2[10]
P5_2 = MBED_PIN(0x05, 2, 2, 11), // GPIO2[11]
P5_3 = MBED_PIN(0x05, 3, 2, 12), // GPIO2[12]
P5_4 = MBED_PIN(0x05, 4, 2, 13), // GPIO2[13]
P5_5 = MBED_PIN(0x05, 5, 2, 14), // GPIO2[14]
P5_6 = MBED_PIN(0x05, 6, 2, 15), // GPIO2[15]
P5_7 = MBED_PIN(0x05, 7, 2, 7), // GPIO2[7]
P6_0 = MBED_PIN(0x06, 0, NO_GPIO, 0),
P6_1 = MBED_PIN(0x06, 1, 3, 0), // GPIO3[0]
P6_2 = MBED_PIN(0x06, 2, 3, 1), // GPIO3[1]
P6_3 = MBED_PIN(0x06, 3, 3, 2), // GPIO3[2]
P6_4 = MBED_PIN(0x06, 4, 3, 3), // GPIO3[3]
P6_5 = MBED_PIN(0x06, 5, 3, 4), // GPIO3[4]
P6_6 = MBED_PIN(0x06, 6, 0, 5), // GPIO0[5]
P6_7 = MBED_PIN(0x06, 7, 5, 15), // GPIO5[15]
P6_8 = MBED_PIN(0x06, 8, 5, 16), // GPIO5[16]
P6_9 = MBED_PIN(0x06, 9, 3, 5), // GPIO3[5]
P6_10 = MBED_PIN(0x06, 10, 3, 6), // GPIO3[6]
P6_11 = MBED_PIN(0x06, 11, 3, 7), // GPIO3[7]
P6_12 = MBED_PIN(0x06, 12, 2, 8), // GPIO2[8]
P7_0 = MBED_PIN(0x07, 0, 3, 8), // GPIO3[8]
P7_1 = MBED_PIN(0x07, 1, 3, 9), // GPIO3[9]
P7_2 = MBED_PIN(0x07, 2, 3, 10), // GPIO3[10]
P7_3 = MBED_PIN(0x07, 3, 3, 11), // GPIO3[11]
P7_4 = MBED_PIN(0x07, 4, 3, 12), // GPIO3[12]
P7_5 = MBED_PIN(0x07, 5, 3, 13), // GPIO3[13]
P7_6 = MBED_PIN(0x07, 6, 3, 14), // GPIO3[14]
P7_7 = MBED_PIN(0x07, 7, 3, 15), // GPIO3[15]
P8_0 = MBED_PIN(0x08, 8, 4, 0), // GPIO4[0] high-drive
P8_1 = MBED_PIN(0x09, 0, 4, 1), // GPIO4[1] high-drive
P8_2 = MBED_PIN(0x09, 1, 4, 2), // GPIO4[2] high-drive
P8_3 = MBED_PIN(0x09, 2, 4, 3), // GPIO4[3]
P8_4 = MBED_PIN(0x08, 4, 4, 4), // GPIO4[4]
P8_5 = MBED_PIN(0x08, 5, 4, 5), // GPIO4[5]
P8_6 = MBED_PIN(0x08, 6, 4, 6), // GPIO4[6]
P8_7 = MBED_PIN(0x08, 7, 4, 7), // GPIO4[7]
P8_8 = MBED_PIN(0x08, 8, NO_GPIO, 0),
P9_0 = MBED_PIN(0x09, 0, 4, 12), // GPIO4[12]
P9_1 = MBED_PIN(0x09, 1, 4, 13), // GPIO4[13]
P9_2 = MBED_PIN(0x09, 2, 4, 14), // GPIO4[14]
P9_3 = MBED_PIN(0x09, 3, 4, 15), // GPIO4[15]
P9_4 = MBED_PIN(0x09, 4, 5, 17), // GPIO5[17]
P9_5 = MBED_PIN(0x09, 5, 5, 18), // GPIO5[18]
P9_6 = MBED_PIN(0x09, 6, 4, 11), // GPIO4[11]
PA_0 = MBED_PIN(0x0A, 0, NO_GPIO, 0),
PA_1 = MBED_PIN(0x0A, 1, 4, 8), // GPIO4[8] high-drive
PA_2 = MBED_PIN(0x0A, 2, 4, 9), // GPIO4[9] high-drive
PA_3 = MBED_PIN(0x0A, 3, 4, 10), // GPIO4[10] high-drive
PA_4 = MBED_PIN(0x0A, 4, 5, 19), // GPIO5[19]
PB_0 = MBED_PIN(0x0B, 0, 5, 20), // GPIO5[20]
PB_1 = MBED_PIN(0x0B, 1, 5, 21), // GPIO5[21]
PB_2 = MBED_PIN(0x0B, 2, 5, 22), // GPIO5[22]
PB_3 = MBED_PIN(0x0B, 3, 5, 23), // GPIO5[23]
PB_4 = MBED_PIN(0x0B, 4, 5, 24), // GPIO5[24]
PB_5 = MBED_PIN(0x0B, 5, 5, 25), // GPIO5[25]
PB_6 = MBED_PIN(0x0B, 6, 5, 26), // GPIO5[26]
PC_0 = MBED_PIN(0x0C, 0, NO_GPIO, 0),
PC_1 = MBED_PIN(0x0C, 1, 6, 0), // GPIO6[0]
PC_2 = MBED_PIN(0x0C, 2, 6, 1), // GPIO6[1]
PC_3 = MBED_PIN(0x0C, 3, 6, 2), // GPIO6[2]
PC_4 = MBED_PIN(0x0C, 4, 6, 3), // GPIO6[3]
PC_5 = MBED_PIN(0x0C, 5, 6, 4), // GPIO6[4]
PC_6 = MBED_PIN(0x0C, 6, 6, 5), // GPIO6[5]
PC_7 = MBED_PIN(0x0C, 7, 6, 6), // GPIO6[6]
PC_8 = MBED_PIN(0x0C, 8, 6, 7), // GPIO6[7]
PC_9 = MBED_PIN(0x0C, 9, 6, 8), // GPIO6[8]
PC_10 = MBED_PIN(0x0C, 10, 6, 9), // GPIO6[9]
PC_11 = MBED_PIN(0x0C, 11, 6, 10), // GPIO6[10]
PC_12 = MBED_PIN(0x0C, 12, 6, 11), // GPIO6[11]
PC_13 = MBED_PIN(0x0C, 13, 6, 12), // GPIO6[12]
PC_14 = MBED_PIN(0x0C, 14, 6, 13), // GPIO6[13]
PD_0 = MBED_PIN(0x0D, 0, 6, 14), // GPIO6[14]
PD_1 = MBED_PIN(0x0D, 1, 6, 15), // GPIO6[15]
PD_2 = MBED_PIN(0x0D, 2, 6, 16), // GPIO6[16]
PD_3 = MBED_PIN(0x0D, 3, 6, 17), // GPIO6[17]
PD_4 = MBED_PIN(0x0D, 4, 6, 18), // GPIO6[18]
PD_5 = MBED_PIN(0x0D, 5, 6, 19), // GPIO6[19]
PD_6 = MBED_PIN(0x0D, 6, 6, 20), // GPIO6[20]
PD_7 = MBED_PIN(0x0D, 7, 6, 21), // GPIO6[21]
PD_8 = MBED_PIN(0x0D, 8, 6, 22), // GPIO6[22]
PD_9 = MBED_PIN(0x0D, 9, 6, 23), // GPIO6[23]
PD_10 = MBED_PIN(0x0D, 10, 6, 24), // GPIO6[24]
PD_11 = MBED_PIN(0x0D, 11, 6, 25), // GPIO6[25]
PD_12 = MBED_PIN(0x0D, 12, 6, 26), // GPIO6[26]
PD_13 = MBED_PIN(0x0D, 13, 6, 27), // GPIO6[27]
PD_14 = MBED_PIN(0x0D, 14, 6, 28), // GPIO6[28]
PD_15 = MBED_PIN(0x0D, 15, 6, 29), // GPIO6[29]
PD_16 = MBED_PIN(0x0D, 16, 6, 30), // GPIO6[30]
PE_0 = MBED_PIN(0x0E, 0, 7, 0), // GPIO7[0]
PE_1 = MBED_PIN(0x0E, 1, 7, 1), // GPIO7[1]
PE_2 = MBED_PIN(0x0E, 2, 7, 2), // GPIO7[2]
PE_3 = MBED_PIN(0x0E, 3, 7, 3), // GPIO7[3]
PE_4 = MBED_PIN(0x0E, 4, 7, 4), // GPIO7[4]
PE_5 = MBED_PIN(0x0E, 5, 7, 5), // GPIO7[5]
PE_6 = MBED_PIN(0x0E, 6, 7, 6), // GPIO7[6]
PE_7 = MBED_PIN(0x0E, 7, 7, 7), // GPIO7[7]
PE_8 = MBED_PIN(0x0E, 8, 7, 8), // GPIO7[8]
PE_9 = MBED_PIN(0x0E, 9, 7, 9), // GPIO7[9]
PE_10 = MBED_PIN(0x0E, 10, 7, 10), // GPIO7[10]
PE_11 = MBED_PIN(0x0E, 11, 7, 11), // GPIO7[11]
PE_12 = MBED_PIN(0x0E, 12, 7, 12), // GPIO7[12]
PE_13 = MBED_PIN(0x0E, 13, 7, 13), // GPIO7[13]
PE_14 = MBED_PIN(0x0E, 14, 7, 14), // GPIO7[14]
PE_15 = MBED_PIN(0x0E, 15, 7, 15), // GPIO7[15]
PF_0 = MBED_PIN(0x0F, 0, NO_GPIO, 0),
PF_1 = MBED_PIN(0x0F, 1, 7, 16), // GPIO7[16]
PF_2 = MBED_PIN(0x0F, 2, 7, 17), // GPIO7[17]
PF_3 = MBED_PIN(0x0F, 3, 7, 18), // GPIO7[18]
PF_4 = MBED_PIN(0x0F, 4, NO_GPIO, 0),
PF_5 = MBED_PIN(0x0F, 5, 7, 19), // GPIO7[19]
PF_6 = MBED_PIN(0x0F, 6, 7, 20), // GPIO7[20]
PF_7 = MBED_PIN(0x0F, 7, 7, 21), // GPIO7[21]
PF_8 = MBED_PIN(0x0F, 8, 7, 22), // GPIO7[22]
PF_9 = MBED_PIN(0x0F, 9, 7, 23), // GPIO7[23]
PF_10 = MBED_PIN(0x0F, 10, 7, 24), // GPIO7[24]
PF_11 = MBED_PIN(0x0F, 11, 7, 25), // GPIO7[25]
// GPIO pins from MCU pins
GPIO0_0 = P0_0,
GPIO0_1 = P0_1 ,
GPIO0_2 = P1_15,
GPIO0_3 = P1_16,
GPIO0_4 = P1_0,
GPIO0_5 = P6_6,
GPIO0_6 = P3_6,
GPIO0_7 = P2_7,
GPIO0_8 = P1_1,
GPIO0_9 = P1_2,
GPIO0_10 = P1_3,
GPIO0_11 = P1_4,
GPIO0_12 = P1_17,
GPIO0_13 = P1_18,
GPIO0_14 = P2_10,
GPIO0_15 = P1_20,
GPIO1_0 = P1_7,
GPIO1_1 = P1_8,
GPIO1_2 = P1_9,
GPIO1_3 = P1_10,
GPIO1_4 = P1_11,
GPIO1_5 = P1_12,
GPIO1_6 = P1_13,
GPIO1_7 = P1_14,
GPIO1_8 = P1_5,
GPIO1_9 = P1_6,
GPIO1_10 = P2_9,
GPIO1_11 = P2_11,
GPIO1_12 = P2_12,
GPIO1_13 = P2_13,
GPIO1_14 = P3_4,
GPIO1_15 = P3_5,
GPIO2_0 = P4_0,
GPIO2_1 = P4_1,
GPIO2_2 = P4_2,
GPIO2_3 = P4_3,
GPIO2_4 = P4_4,
GPIO2_5 = P4_5,
GPIO2_6 = P4_6,
GPIO2_7 = P5_7,
GPIO2_8 = P6_12,
GPIO2_9 = P5_0,
GPIO2_10 = P5_1,
GPIO2_11 = P5_2,
GPIO2_12 = P5_3,
GPIO2_13 = P5_4,
GPIO2_14 = P5_5,
GPIO2_15 = P5_6,
GPIO3_0 = P6_1,
GPIO3_1 = P6_2,
GPIO3_2 = P6_3,
GPIO3_3 = P6_4,
GPIO3_4 = P6_5,
GPIO3_5 = P6_9,
GPIO3_6 = P6_10,
GPIO3_7 = P6_11,
GPIO3_8 = P7_0,
GPIO3_9 = P7_1,
GPIO3_10 = P7_2,
GPIO3_11 = P7_3,
GPIO3_12 = P7_4,
GPIO3_13 = P7_5,
GPIO3_14 = P7_6,
GPIO3_15 = P7_7,
GPIO4_0 = P8_0,
GPIO4_1 = P8_1,
GPIO4_2 = P8_2,
GPIO4_3 = P8_3,
GPIO4_4 = P8_4,
GPIO4_5 = P8_5,
GPIO4_6 = P8_6,
GPIO4_7 = P8_7,
GPIO4_8 = PA_1,
GPIO4_9 = PA_2,
GPIO4_10 = PA_3,
GPIO4_11 = P9_6,
GPIO4_12 = P9_0,
GPIO4_13 = P9_1,
GPIO4_14 = P9_2,
GPIO4_15 = P9_3,
GPIO5_0 = P2_0,
GPIO5_1 = P2_1,
GPIO5_2 = P2_2,
GPIO5_3 = P2_3,
GPIO5_4 = P2_4,
GPIO5_5 = P2_5,
GPIO5_6 = P2_6,
GPIO5_7 = P2_8,
GPIO5_8 = P3_1,
GPIO5_9 = P3_2,
GPIO5_10 = P3_7,
GPIO5_11 = P3_8,
GPIO5_12 = P4_8,
GPIO5_13 = P4_9,
GPIO5_14 = P4_10,
GPIO5_15 = P6_7,
GPIO5_16 = P6_8,
GPIO5_17 = P9_4,
GPIO5_18 = P9_5,
GPIO5_19 = PA_4,
GPIO5_20 = PB_0,
GPIO5_21 = PB_1,
GPIO5_22 = PB_2,
GPIO5_23 = PB_3,
GPIO5_24 = PB_4,
GPIO5_25 = PB_5,
GPIO5_26 = PB_6,
GPIO6_0 = PC_1,
GPIO6_1 = PC_2,
GPIO6_2 = PC_3,
GPIO6_3 = PC_4,
GPIO6_4 = PC_5,
GPIO6_5 = PC_6,
GPIO6_6 = PC_7,
GPIO6_7 = PC_8,
GPIO6_8 = PC_9,
GPIO6_9 = PC_10,
GPIO6_10 = PC_11,
GPIO6_11 = PC_12,
GPIO6_12 = PC_13,
GPIO6_13 = PC_14,
GPIO6_14 = PD_0,
GPIO6_15 = PD_1,
GPIO6_16 = PD_2,
GPIO6_17 = PD_3,
GPIO6_18 = PD_4,
GPIO6_19 = PD_5,
GPIO6_20 = PD_6,
GPIO6_21 = PD_7,
GPIO6_22 = PD_8,
GPIO6_23 = PD_9,
GPIO6_24 = PD_10,
GPIO6_25 = PD_11,
GPIO6_26 = PD_12,
GPIO6_27 = PD_13,
GPIO6_28 = PD_14,
GPIO6_29 = PD_15,
GPIO6_30 = PD_16,
GPIO7_0 = PE_0,
GPIO7_1 = PE_1,
GPIO7_2 = PE_2,
GPIO7_3 = PE_3,
GPIO7_4 = PE_4,
GPIO7_5 = PE_5,
GPIO7_6 = PE_5,
GPIO7_7 = PE_7,
GPIO7_8 = PE_8,
GPIO7_9 = PE_9,
GPIO7_10 = PE_10,
GPIO7_11 = PE_11,
GPIO7_12 = PE_12,
GPIO7_13 = PE_13,
GPIO7_14 = PE_14,
GPIO7_15 = PE_15,
GPIO7_16 = PF_1,
GPIO7_17 = PF_2,
GPIO7_18 = PF_3,
GPIO7_19 = PF_5,
GPIO7_20 = PF_6,
GPIO7_21 = PF_7,
GPIO7_22 = PF_8,
GPIO7_23 = PF_9,
GPIO7_24 = PF_10,
GPIO7_25 = PF_11,
// Map mbed pin names to LPC43xx board signals
// Group 0x18 : CLKn pins
SFP_CLK0 = MBED_PIN(0x18, 0, 0, 0),
SFP_CLK1 = MBED_PIN(0x18, 1, 0, 0),
SFP_CLK2 = MBED_PIN(0x18, 2, 0, 0),
SFP_CLK3 = MBED_PIN(0x18, 3, 0, 0),
// Group 0x19 : USB1, I2C0, ADC0, ADC1
SFP_USB1 = MBED_PIN(0x19, 0, 0, 0),
SFP_I2C0 = MBED_PIN(0x19, 1, 0, 0),
SFP_AIO0 = MBED_PIN(0x19, 2, 0, 0), // ADC0 function select register
SFP_AIO1 = MBED_PIN(0x19, 3, 0, 0), // ADC1 function select register
SFP_AIO2 = MBED_PIN(0x19, 4, 0, 0), // Analog function select register
SFP_EMCD = MBED_PIN(0x1A, 0, 0, 0), // EMC clock delay register
SFP_INS0 = MBED_PIN(0x1C, 0, 0, 0), // Interrupt select for pin interrupts 0 to 3
SFP_INS1 = MBED_PIN(0x1C, 1, 0, 0), // Interrupt select for pin interrupts 4 to 7
// Dedicated pin (no GPIO)
P_DED = MBED_PIN(0, 0, NO_GPIO, 0),
// Not connected
NC = (int)0xFFFFFFFF,
// ---------- Micromint Bambino 200/200E/210/210E (LQFP144) ----------
// Base headers - J8, J9, J10 on Bambino 210/210E
// n/p = not populated, n/a = not available
// 210E 210 200E 200
// ---- ---- ---- ----
p15 = P7_4, // J8-1 J8-1 S4-3 S4-3
p16 = P7_5, // J8-2 J8-2 S4-4 S4-4
p17 = P4_1, // J8-3 J8-3 S3-4 S3-4
p18 = P7_7, // J8-4 J8-4 S4-5 S4-5
p19 = P4_3, // J8-5* J8-5* S3-4 S3-3
p20 = P4_4, // J8-6* J8-6* S1-5 S1-5
p20b = PF_8, // J8-6** J8-6** S3-5 S3-5
// (*) if p20 is configured as DAC, ADC is not available for p19
// (**) requires JP2 mod
p21 = P6_5, // J9-1 J9-1 S2-5 S2-5
p22 = P6_4, // J9-2 J9-2 S2=4 S2-4
p23 = P1_7, // J9-3 J9-3 S2-3 S2-3
p24 = P4_0, // J9-4 J9-4 S3-7 S3-7
p25 = P6_9, // J9-5 J9-5 S8-7 n/p
p26 = P5_5, // J9-6 J9-6 S3-8 S3-8
p27 = P5_7, // J9-7 J9-7 S3-9 S3-9
p28 = P7_6, // J9-8 J9-8 S4-6 S4-6
p29 = P6_12, // J10-1 J10-1 S10-3 n/p
p30 = P5_0, // J10-2 J10-2 S1-4 S1-4
p31 = P4_6, // J10-3 J10-3 S2-6 S2-6
p32 = P4_8, // J10-4 J10-4 S2-7 S2-7
p33 = P4_9, // J10-5 J10-5 S2-8 S2-8
p34 = P4_10, // J10-6 J10-6 S2-9 S2-9
p37 = P2_3, // J10-9 J10-9 S4-8 S4-8
p38 = P2_4, // J10-10 J10-10 S4-9 S4-9
// Extended headers - J11, J12, J13, J14 on Bambino 210E
// 210E 210 200E 200
// ---- ---- ---- ----
p47 = P6_3, // J11-1 n/p S7-5 n/p
p48 = P6_6, // J11-2 n/p S6-7 n/p
p49 = P6_7, // J11-3 n/p S6-8 n/p
p50 = P6_8, // J11-4 n/p S6-9 n/p
p53 = P2_2, // J11-7 n/p S7-7 n/p
p54 = P2_1, // J11-8 n/p S7-3 n/p
p55 = PF_10, // J12-1 n/p n/a n/a
p56 = PF_7, // J12-2 n/p n/a n/a
p57 = P2_6, // J12-3 n/p S8-6 n/p
p58 = P2_8, // J12-4 n/p S8-3 n/p
p59 = P6_10, // J12-5 n/p S7-8 n/p
p60 = P2_9, // J12-6 n/p S9-3 n/p
p61 = P7_3, // J13-1 n/p S7-9 n/p
p62 = P3_2, // J13-2 n/p S9-4 n/p
p63 = P7_2, // J13-3 n/p S4-7 S4-7
p64 = P3_1, // J13-4 n/p S9-5 n/p
p65 = P7_1, // J13-5 n/p S9-8 n/p
p66 = P7_0, // J13-6 n/p S9-9 n/p
p67 = P4_2, // J13-7 n/p S4-6 S4-6
p68 = P4_5, // J13-8 n/p S1-3 S1-3
p69 = P2_13, // J14-1 n/p S9-7 n/p
p70 = P2_12, // J14-2 n/p S9-6 n/p
p71 = P9_6, // J14-3 n/p S6-6 n/p
p72 = P9_5, // J14-4 n/p S7-4 n/p
p73 = P5_3, // J14-5 n/p S6-5 n/p
p74 = P1_8, // J14-6 n/p S6-4 n/p
p75 = P1_5, // J14-7 n/p S10-6 n/p
p76 = P1_4, // J14-8 n/p S10-7 n/p
p77 = P1_3, // J14-9 n/p S10-8 n/p
p78 = PF_4, // J14-10 n/p S10-9 n/p
// J16 - PMOD-SSP header (not populated, field installable)
p80 = P1_0, // J16-1 J16-1 S1-6 S1-6
p81 = P1_2, // J16-2 J16-2 S1-7 S1-7
p82 = P1_1, // J16-3 J16-3 S1-8 S1-8
p83 = P3_0, // J16-4 J16-4 S1-9 S1-9
// Arduino pins - J8, J9, J10
// 210E 210 200E 200
// ---- ---- ---- ----
D0 = p21, // J9-1 J9-1 S2-5 S2-5
D1 = p22, // J9-2 J9-2 S2-4 S2-4
D2 = p23, // J9-3 J9-3 S2-3 S2-3
D3 = p24, // J9-4 J9-4 S3-7 S3-7
D4 = p25, // J9-5 J9-5 S8-7 n/p
D5 = p26, // J9-6 J9-6 S3-8 S3-8
D6 = p27, // J9-7 J9-7 S3-9 S3-9
D7 = p28, // J9-8 J9-8 S4-6 S4-6
D8 = p29, // J10-1 J10-1 S10-1 n/p
D9 = p30, // J10-2 J10-2 S1-4 S1-4
D10 = p31, // J10-3 J10-3 S2-6 S2-6
D11 = p32, // J10-4 J10-4 S2-7 S2-7
D12 = p33, // J10-5 J10-5 S2-8 S2-8
D13 = p34, // J10-6 J10-6 S2-9 S2-9
D16 = p37, // J10-9 J10-9 S4-8 S4-8
D17 = p38, // J10-10 J10-10 S4-9 S4-9
A0 = p15, // J8-1 J8-1 S4-3 S4-3
A1 = p16, // J8-2 J8-2 S4-4 S4-4
A2 = p17, // J8-3 J8-3 S3-4 S3-4
A3 = p18, // J8-4 J8-4 S3-4 S3-4
A4 = p19, // J8-5* J8-5* S3-3 S3-3
A5 = p20, // J8-6* J8-6* S1-5 S1-5
A5b = p20b, // J8-6** J8-6** S3-5 S3-5
// (*) if A5 is configured as DAC, ADC is not available for A4
// (**) requires JP2 mod
// Extended Arduino pins - J11, J12, J13, J14
// 210E 210 200E 200
// ---- ---- ---- ----
D20 = p61, // J13-1 n/p S7-9 n/p
D21 = p62, // J13-2 n/p S9-4 n/p
D22 = p63, // J13-3 n/p S4-7 S4-7
D23 = p64, // J13-4 n/p S9-5 n/p
D24 = p65, // J13-5 n/p S9-8 n/p
D25 = p66, // J13-6 n/p S9-9 n/p
D26 = p67, // J13-7 n/p S3-7 S3-7
D27 = p68, // J13-8 n/p S1-3 S1-3
D30 = p69, // J14-1 n/p S9-7 n/p
D31 = p70, // J14-2 n/p S9-6 n/p
D32 = p71, // J14-3 n/p S6-6 n/p
D33 = p72, // J14-4 n/p S7-4 n/p
D34 = p73, // J14-5 n/p S6-5 n/p
D35 = p74, // J14-6 n/p S6-4 n/p
D36 = p75, // J14-7 n/p S10-6 n/p
D37 = p76, // J14-8 n/p S10-7 n/p
D38 = p77, // J14-9 n/p S10-8 n/p
D39 = p78, // J14-10 n/p S10-9 n/p
D40 = p47, // J11-1 n/p S7-5 n/p
D41 = p48, // J11-2 n/p S6-7 n/p
D42 = p49, // J11-3 n/p S6-8 n/p
D43 = p50, // J11-4 n/p S6-9 n/p
D46 = p53, // J11-7 n/p S7-7 n/p
D47 = p54, // J11-8 n/p S7-3 n/p
D52 = p57, // J12-3 n/p S8-6 n/p
D53 = p58, // J12-4 n/p S8-3 n/p
D54 = p59, // J12-5 n/p S7-8 n/p
D55 = p60, // J12-6 n/p S9-3 n/p
A6 = p55, // J12-1 n/p n/a n/a
A7 = p56, // J12-2 n/p n/a n/a
// User interfaces: LEDs, buttons
// 210E 210 200E 200
// ---- ---- ---- ----
LED1 = P6_11, // 210/210E/200e/200
LED2 = P2_5, // 210/210E/200e/200
LED3 = P6_1, // 210/210E only S6-3 n/p
LED4 = P6_2, // 210/210E only S7-6 n/p
LED_YELLOW = LED1,
LED_GREEN = LED2,
LED_RED = LED3,
LED_BLUE = LED4,
BTN1 = P2_7,
// Serial pins - UART, SPI, I2C
// 210E 210 200E 200
// ---- ---- ---- ----
UART0_TX = P6_4, // J9-2 J9-2 S2-4 S2-4
UART0_RX = P6_5, // J9-1 J9-1 S2-5 S2-5
UART1_TX = P5_6, // XBEE n/p S5-4/XBEE S5-4
UART1_RX = P1_14, // XBEE n/p S5-5/XBEE S5-5
UART2_TX = P2_10, // MBEDHDK MBEDHDK S10-4 n/p
UART2_RX = P2_11, // MBEDHDK MBEDHDK S10-5 n/p
UART3_TX = P2_3, // J10-9 n/p S4-8 S4-8
UART3_RX = P2_4, // J10-10 n/p S4-9 S4-9
COM1_TX = UART0_TX,
COM1_RX = UART0_RX,
COM2_TX = UART1_TX,
COM2_RX = UART1_RX,
COM3_TX = UART2_TX,
COM3_RX = UART2_RX,
COM4_TX = UART3_TX,
COM4_RX = UART3_RX,
// 210E 210 200E 200
// ---- ---- ---- ----
SPI0_SCK = P3_0, // J16-4 n/p S1-9 S1-9
SPI0_MISO = P1_1, // J16-3 n/p S1-8 S1-8
SPI0_MOSI = P1_2, // J16-2 n/p S1-7 S1-7
SPI0_SSEL = P1_0, // J16-1 n/p S1-6 S1-6
SPI1_SCK = PF_4, // J14-10 n/p S10-9 n/p
SPI1_MISO = P1_3, // J14-9 n/p S10-8 n/p
SPI1_MOSI = P1_4, // J14-8 n/p S10-7 n/p
SPI1_SSEL = P1_5, // J14-7 n/p S10-6 n/p
I2C0_SDA = P_DED, // J15-3 J15-3 S8-8 n/p
I2C0_SCL = P_DED, // J15-1 J15-1 S8-9 n/p
I2C1_SDA = P2_3, // J10-9 J10-9 S4-8 S4-8
I2C1_SCL = P2_4, // J10-10 J10-10 S4-9 S4-9
// Analog pins
ADC0 = P7_4, // J8-1 J8-1 S4-3 S4-3
ADC1 = P7_5, // J8-2 J8-2 S4-4 S4-4
ADC2 = P4_1, // J8-3 J8-3 S3-4 S3-4
ADC3 = P7_7, // J8-4 J8-4 S3-4 S3-4
ADC4 = P4_3, // J8-5* J8-5* S3-3 S3-3
ADC5 = PF_8, // J8-6** J8-6** S1-5 S1-5
ADC6 = PF_10, // J12-1 n/p n/a n/a
ADC7 = PF_7, // J12-2 n/p n/a n/a
DAC0 = P4_4, // J8-6* J8-6* S3-5 S3-5
// (*) if DAC0 is configured, ADC4 is not available
// (**) ADC5 requires JP2 mod
// USB pins
// 210E 210 200E 200
// ---- ---- ---- ----
USBTX = UART2_TX, // MBEDHDK MBEDHDK S10-4 n/p
USBRX = UART2_RX, // MBEDHDK MBEDHDK S10-5 n/p
// PWM pins
// 210E 210 200E 200
// ---- ---- ---- ----
PWM1 = P1_7, // J9-3 J9-3 S2-3 S2-3
PWM2 = P7_6, // J9-8 J9-8 S4-6 S4-6
PWM3 = P6_12, // J10-1 J10-1 S10-3 n/p
PWM4 = P4_6, // J10-3 J10-3 S2-6 S2-6
PWM5 = P7_5, // J8-2 J8-2 S4-4 S4-4
PWM6 = P4_1, // J8-3 J8-3 S3-4 S3-4
PWM7 = P7_7, // J8-4 J8-4 S4-5 S4-5
PWM8 = P2_8, // J12-4 n/p S8-3 n/p
PWM9 = P2_9, // J12-6 n/p S9-3 n/p
PWM10 = P7_1, // J13-5 n/p S9-8 n/p
PWM11 = P7_0, // J13-6 n/p S9-9 n/p
PWM12 = P1_5, // J14-7 n/p S10-6 n/p
// ---------- End of Micromint Bambino ----------
} PinName;
typedef enum {
PullUp = 0,
PullDown = 3,
PullNone = 2,
Repeater = 1,
OpenDrain = 4,
PullDefault = PullDown
} PinMode;
#ifdef __cplusplus
}
#endif
#endif