Diff: main.cpp

Revision:

0:d63b2aa1d448

diff -r 000000000000 -r d63b2aa1d448 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sun Oct 30 17:07:17 2011 +0000
@@ -0,0 +1,175 @@
+// Written by IVA2K
+//
+// Example of HTTPServer with additional features:
+// * Link status indication (LED4)
+// * Local file system (create index.htm page on MBED!)
+// * RPC-able class (myrpc, allows remote function call that blinks LED1 N times)
+//
+// Instructions:
+// 1  Plug MBED into BoB2 (or other ETH connector breakout)
+// 2  Plug ETH connector into your network (needs DHCP to get IP address)
+// 3  Power up MBED using USB cable
+// 4  Install MBED serial driver (http://mbed.org/handbook/SerialPC)
+// 5  Copy compiled .bin to your MBED (make sure target device selected in the compiler is correct)
+// 6  Open terminal on the mbed serial port
+// 7  Push MBED reset button
+// 8  Terminal will display info message with mac address, followed by IP address (if connection succeeds)
+// 9  Open browser and enter the following URL, inserting your MBED's IP address:
+//    http://10.0.0.321/rpc/myrpc1/blink,10 (instead of 10.0.0.321 use MBED IP address from terminal)
+// 10 MBED will blink the LED 10 times
+//
+// Notes: there are still some bugs in HTTPServer code. 
+// To help fight some of them, copy a valid favicon.ico (a 16x16 icon) file to MBED.
+//
+
+#include "mbed.h"
+#include "HTTPServer.h"
+#include "HTTPRPC.h"
+#include "HTTPFS.h"
+#include "myrpc.h"
+#include "main.h"
+#include "TextLCD.h"
+
+DigitalIn knop(p14,"p14");
+DigitalOut bel(p21, "p21");
+DigitalOut led1(LED1, "led1");
+DigitalOut led2(LED2, "led2");
+DigitalOut led3(LED3, "led3");
+DigitalOut led4(LED4, "led4");
+LocalFileSystem local("local");
+myrpc myrpc1(p21, "myrpc1");
+
+extern Ethernet eth;        // eth is defined elsewhere, avoid compiler error.
+Serial pc(USBTX, USBRX);    // serial poort met pc
+TextLCD lcd(p5, p6, p7, p8, p9, p10, p11); // rs, rw, e, d0, d1, d2, d3
+Ticker eth_timer;           //ethernet timer
+
+void print_tijd()           //haal uur en min uit npt protocol
+{
+       print_time(cTime->tm_hour, cTime->tm_min);
+}
+
+void print_time(int hour, int minute) 
+ //timezonecorrectie en tijd op display schrijven
+ //en led aan laten gaan op ingestelde tijd of door drukknop
+{
+    /* Variable tmphr is 24 hour time adjusted for timezone */
+ int tmphr = hour + 13 ;
+    while (tmphr < 0)
+        tmphr += 24;
+    tmphr %= 24;
+    
+ int tmpmin = minute;
+    
+   //24 uren klok
+    int printhr = tmphr % 24;
+    if (printhr == 0)
+        printhr += 24;
+        lcd.locate(0,1);
+        lcd.printf("%2d:%02d ", printhr, minute);
+ if ((tmpmin == 1 & tmphr == 1)+(knop==1)){ //Hier moete een tijd ingeven om wat uur het alarm aan gaat of als op de druk knop word gedrukt. 
+    bel.write(1);
+    wait(10); //hoelang het alarm moet afgaan
+    bel.write(0);
+    }
+}    
+
+//#define LED_ETH_LINK(val) do { led4=val; } while (0)
+void eth_link_status() {    //internet deffinieren
+    static bool first = true;        // eerste keer ip opvragen
+    static int eth_link = -1;        // hebben we verbinding met de switch
+    int new_link = eth.link();
+    if (eth_link != new_link) {
+        if (new_link) {
+            // From http://mbed.org/forum/post/909/
+            NetServer *net = NetServer::get();
+            struct ip_addr ip = net->getIPAddr();
+//            struct ip_addr gw = net->getGateway();
+//            struct ip_addr nm = net->getNetmask();
+//            struct ip_addr dns = net->getDNS1();
+            lcd.locate(0,0); 
+            lcd.printf("%hhu.%hhu.%hhu.%hhu\n", (ip.addr)&0xFF, (ip.addr>>8)&0xFF, (ip.addr>>16)&0xFF, (ip.addr>>24)&0xFF);
+            }
+        else {
+            lcd.locate(0,0);
+            lcd.printf("<link down>       \n");
+        }
+        //LED_ETH_LINK(new_link);
+        eth_link = new_link;
+    }
+}
+
+int main(void) 
+{ //Alle led aan maken dat je kan zijn als het ergens vast zit of niet vind.
+    led1=1;
+    led2=1;
+    led3=1;
+    led4=1;
+    pc.baud(9600);
+// om internet server te maken
+    char *hostname = "mbed";
+    HTTPServer http(hostname);    // Use DHCP
+    http.timeout(60);
+
+// dit is nodig om via het internet het rpc protocol uit te voeren
+    Base::add_rpc_class<AnalogIn>();
+    Base::add_rpc_class<AnalogOut>();
+    Base::add_rpc_class<DigitalIn>();
+    Base::add_rpc_class<DigitalOut>();
+    Base::add_rpc_class<PwmOut>();
+    Base::add_rpc_class<Timer>();
+    Base::add_rpc_class<SPI>();
+    Base::add_rpc_class<BusOut>();
+    Base::add_rpc_class<BusIn>();
+    Base::add_rpc_class<myrpc>();
+    led1=0;
+
+    http.addHandler(new HTTPRPC());
+    led2=0;
+
+    http.addHandler(new HTTPFileSystemHandler("/", "/local/"));
+    led3=0;
+
+// FIXME: BUG:: If eth is not plugged, http.bind() hangs for a while!
+    http.bind();
+    led4 = 0;
+
+    //pc.printf("\r");    // Add linefeed for stupid Hyperterminal
+    eth_timer.attach(&eth_link_status, 0.1);
+//NTP uitlezen vanuit ntp server
+    Host server(IpAddr(), 123, "0;uk.pool.ntp.org");
+    ntp.setTime(server);
+    pc.printf("\nstart");
+    while(1) 
+    {
+        http.poll();    // Have to call this method at least every 250ms to let the http server run.
+        wait(0.100);
+   
+        /* Temporary variables for control loop */
+        time_t rtc_time = time(NULL);
+        int minute = -1; 
+
+        /* Update current time */
+        rtc_time = time(NULL);
+
+        cTime = localtime(&rtc_time);
+      
+        /* Only redraw the lcd display if anything changes */
+        if (cTime->tm_min != minute) 
+        {
+            minute = cTime->tm_min;
+
+            print_tijd();
+            /* Update time from NTP server if it's midnight UTC */
+//changed min to 1
+            if ((cTime->tm_min == 1) && (cTime->tm_hour == 0)) 
+            {
+                Host server(IpAddr(), 123, "0.north-america.pool.ntp.org");
+
+                ntp.setTime(server); 
+            }
+        }
+    } //return 0; 
+}
+   
+//END
\ No newline at end of file