Andrew Lindsay
Additional font macro
Diff: STM32F429I-Discovery/stm32f429i_discovery.h
- Revision:
- 0:e1d164542663
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/STM32F429I-Discovery/stm32f429i_discovery.h Thu Dec 17 10:27:15 2015 +0000
@@ -0,0 +1,349 @@
+/**
+ ******************************************************************************
+ * @file stm32f429i_discovery.h
+ * @author MCD Application Team
+ * @version V2.1.2
+ * @date 02-March-2015
+ * @brief This file contains definitions for STM32F429I-Discovery Kit LEDs,
+ * push-buttons hardware resources.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F429I_DISCOVERY_H
+#define __STM32F429I_DISCOVERY_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal.h"
+
+/** @addtogroup BSP
+ * @{
+ */
+
+/** @addtogroup STM32F429I_DISCOVERY
+ * @{
+ */
+
+/** @addtogroup STM32F429I_DISCOVERY_LOW_LEVEL
+ * @{
+ */
+
+/** @defgroup STM32F429I_DISCOVERY_LOW_LEVEL_Exported_Types
+ * @{
+ */
+typedef enum
+{
+ DISCO_LED3 = 0,
+ DISCO_LED4 = 1
+}Led_TypeDef;
+
+typedef enum
+{
+ BUTTON_KEY = 0,
+}Button_TypeDef;
+
+typedef enum
+{
+ BUTTON_MODE_GPIO = 0,
+ BUTTON_MODE_EXTI = 1
+}ButtonMode_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup STM32F429I_DISCOVERY_LOW_LEVEL_Exported_Constants
+ * @{
+ */
+
+/**
+ * @brief Define for STM32F429I_DISCO board
+ */
+#if !defined (USE_STM32F429I_DISCO)
+ #define USE_STM32F429I_DISCO
+#endif
+
+/** @addtogroup STM32F429I_DISCOVERY_LOW_LEVEL_LED
+ * @{
+ */
+#define LEDn 2
+
+#define LED3_PIN GPIO_PIN_13
+#define LED3_GPIO_PORT GPIOG
+#define LED3_GPIO_CLK_ENABLE() __GPIOG_CLK_ENABLE()
+#define LED3_GPIO_CLK_DISABLE() __GPIOG_CLK_DISABLE()
+
+#define LED4_PIN GPIO_PIN_14
+#define LED4_GPIO_PORT GPIOG
+#define LED4_GPIO_CLK_ENABLE() __GPIOG_CLK_ENABLE()
+#define LED4_GPIO_CLK_DISABLE() __GPIOG_CLK_DISABLE()
+
+#define LEDx_GPIO_CLK_ENABLE(__INDEX__) do{if((__INDEX__) == 0) LED3_GPIO_CLK_ENABLE(); else \
+ if((__INDEX__) == 1) LED4_GPIO_CLK_ENABLE(); \
+ }while(0)
+#define LEDx_GPIO_CLK_DISABLE(__INDEX__) do{if((__INDEX__) == 0) LED3_GPIO_CLK_DISABLE(); else \
+ if((__INDEX__) == 1) LED4_GPIO_CLK_DISABLE(); \
+ }while(0)
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F429I_DISCOVERY_LOW_LEVEL_BUTTON
+ * @{
+ */
+#define BUTTONn 1
+
+/**
+ * @brief Wakeup push-button
+ */
+#define KEY_BUTTON_PIN GPIO_PIN_0
+#define KEY_BUTTON_GPIO_PORT GPIOA
+#define KEY_BUTTON_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
+#define KEY_BUTTON_GPIO_CLK_DISABLE() __GPIOA_CLK_DISABLE()
+#define KEY_BUTTON_EXTI_IRQn EXTI0_IRQn
+
+#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__) do{if((__INDEX__) == 0) KEY_BUTTON_GPIO_CLK_ENABLE(); \
+ }while(0)
+#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) do{if((__INDEX__) == 0) KEY_BUTTON_GPIO_CLK_DISABLE(); \
+ }while(0)
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F429I_DISCOVERY_LOW_LEVEL_BUS
+ * @{
+ */
+/* Exported constanIO --------------------------------------------------------*/
+#define IO_I2C_ADDRESS 0x82
+#define TS_I2C_ADDRESS 0x82
+
+#ifdef EE_M24LR64
+#define EEPROM_I2C_ADDRESS_A01 0xA0
+#define EEPROM_I2C_ADDRESS_A02 0xA6
+#endif /* EE_M24LR64 */
+
+/*############################### I2Cx #######################################*/
+/* User can use this section to tailor I2Cx instance used and associated
+ resources */
+#define DISCOVERY_I2Cx I2C3
+#define DISCOVERY_I2Cx_CLOCK_ENABLE() __I2C3_CLK_ENABLE()
+#define DISCOVERY_I2Cx_FORCE_RESET() __I2C3_FORCE_RESET()
+#define DISCOVERY_I2Cx_RELEASE_RESET() __I2C3_RELEASE_RESET()
+#define DISCOVERY_I2Cx_SDA_GPIO_CLK_ENABLE() __GPIOC_CLK_ENABLE()
+#define DISCOVERY_I2Cx_SCL_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
+#define DISCOVERY_I2Cx_SDA_GPIO_CLK_DISABLE() __GPIOC_CLK_DISABLE()
+
+/* Definition for DISCO I2Cx Pins */
+#define DISCOVERY_I2Cx_SCL_PIN GPIO_PIN_8
+#define DISCOVERY_I2Cx_SCL_GPIO_PORT GPIOA
+#define DISCOVERY_I2Cx_SCL_SDA_AF GPIO_AF4_I2C3
+#define DISCOVERY_I2Cx_SDA_PIN GPIO_PIN_9
+#define DISCOVERY_I2Cx_SDA_GPIO_PORT GPIOC
+
+/* Definition for IOE I2Cx's NVIC */
+#define DISCOVERY_I2Cx_EV_IRQn I2C3_EV_IRQn
+#define DISCOVERY_I2Cx_ER_IRQn I2C3_ER_IRQn
+
+/* I2C clock speed configuration (in Hz)
+ WARNING:
+ Make sure that this define is not already declared in other files.
+ It can be used in parallel by other modules. */
+#ifndef BSP_I2C_SPEED
+ #define BSP_I2C_SPEED 100000
+#endif /* BSP_I2C_SPEED */
+
+#define I2Cx_TIMEOUT_MAX 0x3000 /*<! The value of the maximal timeout for I2C waiting loops */
+
+/*############################### SPIx #######################################*/
+#define DISCOVERY_SPIx SPI5
+#define DISCOVERY_SPIx_CLK_ENABLE() __SPI5_CLK_ENABLE()
+#define DISCOVERY_SPIx_GPIO_PORT GPIOF /* GPIOF */
+#define DISCOVERY_SPIx_AF GPIO_AF5_SPI5
+#define DISCOVERY_SPIx_GPIO_CLK_ENABLE() __GPIOF_CLK_ENABLE()
+#define DISCOVERY_SPIx_GPIO_CLK_DISABLE() __GPIOF_CLK_DISABLE()
+#define DISCOVERY_SPIx_SCK_PIN GPIO_PIN_7 /* PF.07 */
+#define DISCOVERY_SPIx_MISO_PIN GPIO_PIN_8 /* PF.08 */
+#define DISCOVERY_SPIx_MOSI_PIN GPIO_PIN_9 /* PF.09 */
+/* Maximum Timeout values for flags waiting loops. These timeouts are not based
+ on accurate values, they just guarantee that the application will not remain
+ stuck if the SPI communication is corrupted.
+ You may modify these timeout values depending on CPU frequency and application
+ conditions (interrupts routines ...). */
+#define SPIx_TIMEOUT_MAX ((uint32_t)0x1000)
+
+
+/*################################ IOE #######################################*/
+/**
+ * @brief IOE Control pin
+ */
+/* Definition for external IT for STMPE811 */
+#define STMPE811_INT_PIN GPIO_PIN_15
+#define STMPE811_INT_GPIO_PORT GPIOA
+#define STMPE811_INT_CLK_ENABLE() __GPIOA_CLK_ENABLE()
+#define STMPE811_INT_CLK_DISABLE() __GPIOA_CLK_DISABLE()
+#define STMPE811_INT_EXTI EXTI15_10_IRQn
+#define STMPE811_INT_EXTIHandler EXTI15_10_IRQHandler
+
+/*################################ LCD #######################################*/
+/* Chip Select macro definition */
+#define LCD_CS_LOW() HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_RESET)
+#define LCD_CS_HIGH() HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_SET)
+
+/* Set WRX High to send data */
+#define LCD_WRX_LOW() HAL_GPIO_WritePin(LCD_WRX_GPIO_PORT, LCD_WRX_PIN, GPIO_PIN_RESET)
+#define LCD_WRX_HIGH() HAL_GPIO_WritePin(LCD_WRX_GPIO_PORT, LCD_WRX_PIN, GPIO_PIN_SET)
+
+/* Set WRX High to send data */
+#define LCD_RDX_LOW() HAL_GPIO_WritePin(LCD_RDX_GPIO_PORT, LCD_RDX_PIN, GPIO_PIN_RESET)
+#define LCD_RDX_HIGH() HAL_GPIO_WritePin(LCD_RDX_GPIO_PORT, LCD_RDX_PIN, GPIO_PIN_SET)
+
+/**
+ * @brief LCD Control pin
+ */
+#define LCD_NCS_PIN GPIO_PIN_2
+#define LCD_NCS_GPIO_PORT GPIOC
+#define LCD_NCS_GPIO_CLK_ENABLE() __GPIOC_CLK_ENABLE()
+#define LCD_NCS_GPIO_CLK_DISABLE() __GPIOC_CLK_DISABLE()
+/**
+ * @}
+ */
+/**
+ * @brief LCD Command/data pin
+ */
+#define LCD_WRX_PIN GPIO_PIN_13
+#define LCD_WRX_GPIO_PORT GPIOD
+#define LCD_WRX_GPIO_CLK_ENABLE() __GPIOD_CLK_ENABLE()
+#define LCD_WRX_GPIO_CLK_DISABLE() __GPIOD_CLK_DISABLE()
+
+#define LCD_RDX_PIN GPIO_PIN_12
+#define LCD_RDX_GPIO_PORT GPIOD
+#define LCD_RDX_GPIO_CLK_ENABLE() __GPIOD_CLK_ENABLE()
+#define LCD_RDX_GPIO_CLK_DISABLE() __GPIOD_CLK_DISABLE()
+
+/*################################ GYROSCOPE #################################*/
+/* Read/Write command */
+#define READWRITE_CMD ((uint8_t)0x80)
+/* Multiple byte read/write command */
+#define MULTIPLEBYTE_CMD ((uint8_t)0x40)
+/* Dummy Byte Send by the SPI Master device in order to generate the Clock to the Slave device */
+#define DUMMY_BYTE ((uint8_t)0x00)
+
+/* Chip Select macro definition */
+#define GYRO_CS_LOW() HAL_GPIO_WritePin(GYRO_CS_GPIO_PORT, GYRO_CS_PIN, GPIO_PIN_RESET)
+#define GYRO_CS_HIGH() HAL_GPIO_WritePin(GYRO_CS_GPIO_PORT, GYRO_CS_PIN, GPIO_PIN_SET)
+
+/**
+ * @brief GYROSCOPE SPI Interface pins
+ */
+#define GYRO_CS_PIN GPIO_PIN_1 /* PC.01 */
+#define GYRO_CS_GPIO_PORT GPIOC /* GPIOC */
+#define GYRO_CS_GPIO_CLK_ENABLE() __GPIOC_CLK_ENABLE()
+#define GYRO_CS_GPIO_CLK_DISABLE() __GPIOC_CLK_DISABLE()
+
+#define GYRO_INT_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
+#define GYRO_INT_GPIO_CLK_DISABLE() __GPIOA_CLK_DISABLE()
+#define GYRO_INT_GPIO_PORT GPIOA /* GPIOA */
+#define GYRO_INT1_PIN GPIO_PIN_1 /* PA.01 */
+#define GYRO_INT1_EXTI_IRQn EXTI1_IRQn
+#define GYRO_INT2_PIN GPIO_PIN_2 /* PA.02 */
+#define GYRO_INT2_EXTI_IRQn EXTI2_IRQn
+/**
+ * @}
+ */
+
+#ifdef EE_M24LR64
+/** @addtogroup STM32F429I_DISCOVERY_LOW_LEVEL_I2C_EEPROM
+ * @{
+ */
+/**
+ * @brief I2C EEPROM Interface pins
+ */
+#define EEPROM_I2C_DMA DMA1
+#define EEPROM_I2C_DMA_CHANNEL DMA_CHANNEL_3
+#define EEPROM_I2C_DMA_STREAM_TX DMA1_Stream4
+#define EEPROM_I2C_DMA_STREAM_RX DMA1_Stream2
+#define EEPROM_I2C_DMA_CLK_ENABLE() __DMA1_CLK_ENABLE()
+
+#define EEPROM_I2C_DMA_TX_IRQn DMA1_Stream4_IRQn
+#define EEPROM_I2C_DMA_RX_IRQn DMA1_Stream2_IRQn
+#define EEPROM_I2C_DMA_TX_IRQHandler DMA1_Stream4_IRQHandler
+#define EEPROM_I2C_DMA_RX_IRQHandler DMA1_Stream2_IRQHandler
+#define EEPROM_I2C_DMA_PREPRIO 0
+/**
+ * @}
+ */
+
+#endif /* EE_M24LR64 */
+
+/** @defgroup STM32F429I_DISCOVERY_LOW_LEVEL_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup STM32F429I_DISCOVERY_LOW_LEVEL_Exported_Functions
+ * @{
+ */
+uint32_t BSP_GetVersion(void);
+void BSP_LED_Init(Led_TypeDef Led);
+void BSP_LED_On(Led_TypeDef Led);
+void BSP_LED_Off(Led_TypeDef Led);
+void BSP_LED_Toggle(Led_TypeDef Led);
+void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
+uint32_t BSP_PB_GetState(Button_TypeDef Button);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F429I_DISCOVERY_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/