Carl - SolderSplash Labs
Kojto CC3000 Hostdriver With Mbed Socket interface
Dependents: WiFiDip-KitchenSink WiFiDip-UsbKitchenSink WiFiDipCortexSensor WifiDipCortex-UDPDemo
Fork of
cc3000_hostdriver_mbedsocket
by 
Martin Kojtal
Diff: cc3000_spi.h
- Revision:
- 21:30b6ed7bf8fd
- Parent:
- 0:615c697c33b0
--- a/cc3000_spi.h Thu Oct 03 09:49:03 2013 +0200
+++ b/cc3000_spi.h Thu Oct 03 17:15:45 2013 +0200
@@ -1,251 +1,251 @@
-/*****************************************************************************
-*
-* C++ interface/implementation created by Martin Kojtal (0xc0170). Thanks to
-* Jim Carver and Frank Vannieuwkerke for their inital cc3000 mbed port and
-* provided help.
-*
-* This version of "host driver" uses CC3000 Host Driver Implementation. Thus
-* read the following copyright:
-*
-* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions
-* are met:
-*
-* Redistributions of source code must retain the above copyright
-* notice, this list of conditions and the following disclaimer.
-*
-* Redistributions in binary form must reproduce the above copyright
-* notice, this list of conditions and the following disclaimer in the
-* documentation and/or other materials provided with the
-* distribution.
-*
-* Neither the name of Texas Instruments Incorporated nor the names of
-* its contributors may be used to endorse or promote products derived
-* from this software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-*****************************************************************************/
-#ifndef CC3000_SPI_H
-#define CC3000_SPI_H
-
-typedef struct
-{
- uint16_t tx_packet_length;
- uint16_t rx_packet_length;
- uint32_t spi_state;
-} tSpiInfo;
-
-
-/* ===========================================================================================
- SPI
- =========================================================================================== */
-#define READ 3
-#define WRITE 1
-
-#define HI(value) (((value) & 0xFF00) >> 8)
-#define LO(value) ((value) & 0x00FF)
-
-#define HEADERS_SIZE_EVNT (SPI_HEADER_SIZE + 5)
-
-#define SPI_HEADER_SIZE (5)
-
-#define eSPI_STATE_POWERUP (0)
-#define eSPI_STATE_INITIALIZED (1)
-#define eSPI_STATE_IDLE (2)
-#define eSPI_STATE_WRITE_IRQ (3)
-#define eSPI_STATE_WRITE_FIRST_PORTION (4)
-#define eSPI_STATE_WRITE_EOT (5)
-#define eSPI_STATE_READ_IRQ (6)
-#define eSPI_STATE_READ_FIRST_PORTION (7)
-#define eSPI_STATE_READ_EOT (8)
-
-// The magic number that resides at the end of the TX/RX buffer (1 byte after the allocated size)
-// for the purpose of detection of the overrun. The location of the memory where the magic number
-// resides shall never be written. In case it is written - overrun occured and either recevie function
-// or send function will be stuck forever.
-#define CC3000_BUFFER_MAGIC_NUMBER (0xDE)
-
-/* ===========================================================================================
- HCI
- =========================================================================================== */
-
-#define SL_PATCH_PORTION_SIZE (1000)
-
-#define SPI_HEADER_SIZE (5)
-#define SIMPLE_LINK_HCI_CMND_HEADER_SIZE (4)
-#define HEADERS_SIZE_CMD (SPI_HEADER_SIZE + SIMPLE_LINK_HCI_CMND_HEADER_SIZE)
-#define SIMPLE_LINK_HCI_DATA_CMND_HEADER_SIZE (5)
-#define SIMPLE_LINK_HCI_DATA_HEADER_SIZE (5)
-#define SIMPLE_LINK_HCI_PATCH_HEADER_SIZE (2)
-
-// Values that can be used as HCI Commands and HCI Packet header defines
-#define HCI_TYPE_CMND 0x1
-#define HCI_TYPE_DATA 0x2
-#define HCI_TYPE_PATCH 0x3
-#define HCI_TYPE_EVNT 0x4
-
-
-#define HCI_EVENT_PATCHES_DRV_REQ (1)
-#define HCI_EVENT_PATCHES_FW_REQ (2)
-#define HCI_EVENT_PATCHES_BOOTLOAD_REQ (3)
-
-
-#define HCI_CMND_WLAN_BASE (0x0000)
-#define HCI_CMND_WLAN_CONNECT 0x0001
-#define HCI_CMND_WLAN_DISCONNECT 0x0002
-#define HCI_CMND_WLAN_IOCTL_SET_SCANPARAM 0x0003
-#define HCI_CMND_WLAN_IOCTL_SET_CONNECTION_POLICY 0x0004
-#define HCI_CMND_WLAN_IOCTL_ADD_PROFILE 0x0005
-#define HCI_CMND_WLAN_IOCTL_DEL_PROFILE 0x0006
-#define HCI_CMND_WLAN_IOCTL_GET_SCAN_RESULTS 0x0007
-#define HCI_CMND_EVENT_MASK 0x0008
-#define HCI_CMND_WLAN_IOCTL_STATUSGET 0x0009
-#define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_START 0x000A
-#define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_STOP 0x000B
-#define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_SET_PREFIX 0x000C
-#define HCI_CMND_WLAN_CONFIGURE_PATCH 0x000D
-
-
-#define HCI_CMND_SOCKET_BASE 0x1000
-#define HCI_CMND_SOCKET 0x1001
-#define HCI_CMND_BIND 0x1002
-#define HCI_CMND_RECV 0x1004
-#define HCI_CMND_ACCEPT 0x1005
-#define HCI_CMND_LISTEN 0x1006
-#define HCI_CMND_CONNECT 0x1007
-#define HCI_CMND_BSD_SELECT 0x1008
-#define HCI_CMND_SETSOCKOPT 0x1009
-#define HCI_CMND_GETSOCKOPT 0x100A
-#define HCI_CMND_CLOSE_SOCKET 0x100B
-#define HCI_CMND_RECVFROM 0x100D
-#define HCI_CMND_GETHOSTNAME 0x1010
-#define HCI_CMND_MDNS_ADVERTISE 0x1011
-
-
-#define HCI_DATA_BASE 0x80
-
-#define HCI_CMND_SEND (0x01 + HCI_DATA_BASE)
-#define HCI_CMND_SENDTO (0x03 + HCI_DATA_BASE)
-#define HCI_DATA_BSD_RECVFROM (0x04 + HCI_DATA_BASE)
-#define HCI_DATA_BSD_RECV (0x05 + HCI_DATA_BASE)
-
-
-#define HCI_CMND_NVMEM_CBASE (0x0200)
-
-
-#define HCI_CMND_NVMEM_CREATE_ENTRY (0x0203)
-#define HCI_CMND_NVMEM_SWAP_ENTRY (0x0205)
-#define HCI_CMND_NVMEM_READ (0x0201)
-#define HCI_CMND_NVMEM_WRITE (0x0090)
-#define HCI_CMND_NVMEM_WRITE_PATCH (0x0204)
-#define HCI_CMND_READ_SP_VERSION (0x0207)
-
-#define HCI_CMND_READ_BUFFER_SIZE 0x400B
-#define HCI_CMND_SIMPLE_LINK_START 0x4000
-
-#define HCI_CMND_NETAPP_BASE 0x2000
-
-#define HCI_NETAPP_DHCP (0x0001 + HCI_CMND_NETAPP_BASE)
-#define HCI_NETAPP_PING_SEND (0x0002 + HCI_CMND_NETAPP_BASE)
-#define HCI_NETAPP_PING_REPORT (0x0003 + HCI_CMND_NETAPP_BASE)
-#define HCI_NETAPP_PING_STOP (0x0004 + HCI_CMND_NETAPP_BASE)
-#define HCI_NETAPP_IPCONFIG (0x0005 + HCI_CMND_NETAPP_BASE)
-#define HCI_NETAPP_ARP_FLUSH (0x0006 + HCI_CMND_NETAPP_BASE)
-#define HCI_NETAPP_SET_DEBUG_LEVEL (0x0008 + HCI_CMND_NETAPP_BASE)
-#define HCI_NETAPP_SET_TIMERS (0x0009 + HCI_CMND_NETAPP_BASE)
-
-// Values that can be used as HCI Events defines
-#define HCI_EVNT_WLAN_BASE 0x0000
-#define HCI_EVNT_WLAN_CONNECT 0x0001
-#define HCI_EVNT_WLAN_DISCONNECT \
- 0x0002
-#define HCI_EVNT_WLAN_IOCTL_ADD_PROFILE \
- 0x0005
-
-
-#define HCI_EVNT_SOCKET HCI_CMND_SOCKET
-#define HCI_EVNT_BIND HCI_CMND_BIND
-#define HCI_EVNT_RECV HCI_CMND_RECV
-#define HCI_EVNT_ACCEPT HCI_CMND_ACCEPT
-#define HCI_EVNT_LISTEN HCI_CMND_LISTEN
-#define HCI_EVNT_CONNECT HCI_CMND_CONNECT
-#define HCI_EVNT_SELECT HCI_CMND_BSD_SELECT
-#define HCI_EVNT_CLOSE_SOCKET HCI_CMND_CLOSE_SOCKET
-#define HCI_EVNT_RECVFROM HCI_CMND_RECVFROM
-#define HCI_EVNT_SETSOCKOPT HCI_CMND_SETSOCKOPT
-#define HCI_EVNT_GETSOCKOPT HCI_CMND_GETSOCKOPT
-#define HCI_EVNT_BSD_GETHOSTBYNAME HCI_CMND_GETHOSTNAME
-#define HCI_EVNT_MDNS_ADVERTISE HCI_CMND_MDNS_ADVERTISE
-
-#define HCI_EVNT_SEND 0x1003
-#define HCI_EVNT_WRITE 0x100E
-#define HCI_EVNT_SENDTO 0x100F
-
-#define HCI_EVNT_PATCHES_REQ 0x1000
-
-#define HCI_EVNT_UNSOL_BASE 0x4000
-
-#define HCI_EVNT_WLAN_UNSOL_BASE (0x8000)
-
-#define HCI_EVNT_WLAN_UNSOL_CONNECT (0x0001 + HCI_EVNT_WLAN_UNSOL_BASE)
-#define HCI_EVNT_WLAN_UNSOL_DISCONNECT (0x0002 + HCI_EVNT_WLAN_UNSOL_BASE)
-#define HCI_EVNT_WLAN_UNSOL_INIT (0x0004 + HCI_EVNT_WLAN_UNSOL_BASE)
-#define HCI_EVNT_WLAN_TX_COMPLETE (0x0008 + HCI_EVNT_WLAN_UNSOL_BASE)
-#define HCI_EVNT_WLAN_UNSOL_DHCP (0x0010 + HCI_EVNT_WLAN_UNSOL_BASE)
-#define HCI_EVNT_WLAN_ASYNC_PING_REPORT (0x0040 + HCI_EVNT_WLAN_UNSOL_BASE)
-#define HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE (0x0080 + HCI_EVNT_WLAN_UNSOL_BASE)
-#define HCI_EVNT_WLAN_KEEPALIVE (0x0200 + HCI_EVNT_WLAN_UNSOL_BASE)
-#define HCI_EVNT_BSD_TCP_CLOSE_WAIT (0x0800 + HCI_EVNT_WLAN_UNSOL_BASE)
-
-#define HCI_EVNT_DATA_UNSOL_FREE_BUFF \
- 0x4100
-
-#define HCI_EVNT_NVMEM_CREATE_ENTRY \
- HCI_CMND_NVMEM_CREATE_ENTRY
-#define HCI_EVNT_NVMEM_SWAP_ENTRY HCI_CMND_NVMEM_SWAP_ENTRY
-
-#define HCI_EVNT_NVMEM_READ HCI_CMND_NVMEM_READ
-#define HCI_EVNT_NVMEM_WRITE (0x0202)
-
-#define HCI_EVNT_READ_SP_VERSION \
- HCI_CMND_READ_SP_VERSION
-
-#define HCI_EVNT_INPROGRESS 0xFFFF
-
-
-#define HCI_DATA_RECVFROM 0x84
-#define HCI_DATA_RECV 0x85
-#define HCI_DATA_NVMEM 0x91
-
-#define HCI_EVENT_CC3000_CAN_SHUT_DOWN 0x99
-
-// Prototypes for the structures for HCI APIs.
-#define HCI_DATA_HEADER_SIZE (5)
-#define HCI_EVENT_HEADER_SIZE (5)
-#define HCI_DATA_CMD_HEADER_SIZE (5)
-#define HCI_PATCH_HEADER_SIZE (6)
-
-#define HCI_PACKET_TYPE_OFFSET (0)
-#define HCI_PACKET_ARGSIZE_OFFSET (2)
-#define HCI_PACKET_LENGTH_OFFSET (3)
-
-
-#define HCI_EVENT_OPCODE_OFFSET (1)
-#define HCI_EVENT_LENGTH_OFFSET (3)
-#define HCI_EVENT_STATUS_OFFSET (4)
-#define HCI_DATA_LENGTH_OFFSET (3)
-
-#endif
+/*****************************************************************************
+*
+* C++ interface/implementation created by Martin Kojtal (0xc0170). Thanks to
+* Jim Carver and Frank Vannieuwkerke for their inital cc3000 mbed port and
+* provided help.
+*
+* This version of "host driver" uses CC3000 Host Driver Implementation. Thus
+* read the following copyright:
+*
+* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*
+* Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+*
+* Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in the
+* documentation and/or other materials provided with the
+* distribution.
+*
+* Neither the name of Texas Instruments Incorporated nor the names of
+* its contributors may be used to endorse or promote products derived
+* from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*****************************************************************************/
+#ifndef CC3000_SPI_H
+#define CC3000_SPI_H
+
+typedef struct
+{
+ uint16_t tx_packet_length;
+ uint16_t rx_packet_length;
+ uint32_t spi_state;
+} tSpiInfo;
+
+
+/* ===========================================================================================
+ SPI
+ =========================================================================================== */
+#define READ 3
+#define WRITE 1
+
+#define HI(value) (((value) & 0xFF00) >> 8)
+#define LO(value) ((value) & 0x00FF)
+
+#define HEADERS_SIZE_EVNT (SPI_HEADER_SIZE + 5)
+
+#define SPI_HEADER_SIZE (5)
+
+#define eSPI_STATE_POWERUP (0)
+#define eSPI_STATE_INITIALIZED (1)
+#define eSPI_STATE_IDLE (2)
+#define eSPI_STATE_WRITE_IRQ (3)
+#define eSPI_STATE_WRITE_FIRST_PORTION (4)
+#define eSPI_STATE_WRITE_EOT (5)
+#define eSPI_STATE_READ_IRQ (6)
+#define eSPI_STATE_READ_FIRST_PORTION (7)
+#define eSPI_STATE_READ_EOT (8)
+
+// The magic number that resides at the end of the TX/RX buffer (1 byte after the allocated size)
+// for the purpose of detection of the overrun. The location of the memory where the magic number
+// resides shall never be written. In case it is written - overrun occured and either recevie function
+// or send function will be stuck forever.
+#define CC3000_BUFFER_MAGIC_NUMBER (0xDE)
+
+/* ===========================================================================================
+ HCI
+ =========================================================================================== */
+
+#define SL_PATCH_PORTION_SIZE (1000)
+
+#define SPI_HEADER_SIZE (5)
+#define SIMPLE_LINK_HCI_CMND_HEADER_SIZE (4)
+#define HEADERS_SIZE_CMD (SPI_HEADER_SIZE + SIMPLE_LINK_HCI_CMND_HEADER_SIZE)
+#define SIMPLE_LINK_HCI_DATA_CMND_HEADER_SIZE (5)
+#define SIMPLE_LINK_HCI_DATA_HEADER_SIZE (5)
+#define SIMPLE_LINK_HCI_PATCH_HEADER_SIZE (2)
+
+// Values that can be used as HCI Commands and HCI Packet header defines
+#define HCI_TYPE_CMND 0x1
+#define HCI_TYPE_DATA 0x2
+#define HCI_TYPE_PATCH 0x3
+#define HCI_TYPE_EVNT 0x4
+
+
+#define HCI_EVENT_PATCHES_DRV_REQ (1)
+#define HCI_EVENT_PATCHES_FW_REQ (2)
+#define HCI_EVENT_PATCHES_BOOTLOAD_REQ (3)
+
+
+#define HCI_CMND_WLAN_BASE (0x0000)
+#define HCI_CMND_WLAN_CONNECT 0x0001
+#define HCI_CMND_WLAN_DISCONNECT 0x0002
+#define HCI_CMND_WLAN_IOCTL_SET_SCANPARAM 0x0003
+#define HCI_CMND_WLAN_IOCTL_SET_CONNECTION_POLICY 0x0004
+#define HCI_CMND_WLAN_IOCTL_ADD_PROFILE 0x0005
+#define HCI_CMND_WLAN_IOCTL_DEL_PROFILE 0x0006
+#define HCI_CMND_WLAN_IOCTL_GET_SCAN_RESULTS 0x0007
+#define HCI_CMND_EVENT_MASK 0x0008
+#define HCI_CMND_WLAN_IOCTL_STATUSGET 0x0009
+#define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_START 0x000A
+#define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_STOP 0x000B
+#define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_SET_PREFIX 0x000C
+#define HCI_CMND_WLAN_CONFIGURE_PATCH 0x000D
+
+
+#define HCI_CMND_SOCKET_BASE 0x1000
+#define HCI_CMND_SOCKET 0x1001
+#define HCI_CMND_BIND 0x1002
+#define HCI_CMND_RECV 0x1004
+#define HCI_CMND_ACCEPT 0x1005
+#define HCI_CMND_LISTEN 0x1006
+#define HCI_CMND_CONNECT 0x1007
+#define HCI_CMND_BSD_SELECT 0x1008
+#define HCI_CMND_SETSOCKOPT 0x1009
+#define HCI_CMND_GETSOCKOPT 0x100A
+#define HCI_CMND_CLOSE_SOCKET 0x100B
+#define HCI_CMND_RECVFROM 0x100D
+#define HCI_CMND_GETHOSTNAME 0x1010
+#define HCI_CMND_MDNS_ADVERTISE 0x1011
+
+
+#define HCI_DATA_BASE 0x80
+
+#define HCI_CMND_SEND (0x01 + HCI_DATA_BASE)
+#define HCI_CMND_SENDTO (0x03 + HCI_DATA_BASE)
+#define HCI_DATA_BSD_RECVFROM (0x04 + HCI_DATA_BASE)
+#define HCI_DATA_BSD_RECV (0x05 + HCI_DATA_BASE)
+
+
+#define HCI_CMND_NVMEM_CBASE (0x0200)
+
+
+#define HCI_CMND_NVMEM_CREATE_ENTRY (0x0203)
+#define HCI_CMND_NVMEM_SWAP_ENTRY (0x0205)
+#define HCI_CMND_NVMEM_READ (0x0201)
+#define HCI_CMND_NVMEM_WRITE (0x0090)
+#define HCI_CMND_NVMEM_WRITE_PATCH (0x0204)
+#define HCI_CMND_READ_SP_VERSION (0x0207)
+
+#define HCI_CMND_READ_BUFFER_SIZE 0x400B
+#define HCI_CMND_SIMPLE_LINK_START 0x4000
+
+#define HCI_CMND_NETAPP_BASE 0x2000
+
+#define HCI_NETAPP_DHCP (0x0001 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_PING_SEND (0x0002 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_PING_REPORT (0x0003 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_PING_STOP (0x0004 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_IPCONFIG (0x0005 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_ARP_FLUSH (0x0006 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_SET_DEBUG_LEVEL (0x0008 + HCI_CMND_NETAPP_BASE)
+#define HCI_NETAPP_SET_TIMERS (0x0009 + HCI_CMND_NETAPP_BASE)
+
+// Values that can be used as HCI Events defines
+#define HCI_EVNT_WLAN_BASE 0x0000
+#define HCI_EVNT_WLAN_CONNECT 0x0001
+#define HCI_EVNT_WLAN_DISCONNECT \
+ 0x0002
+#define HCI_EVNT_WLAN_IOCTL_ADD_PROFILE \
+ 0x0005
+
+
+#define HCI_EVNT_SOCKET HCI_CMND_SOCKET
+#define HCI_EVNT_BIND HCI_CMND_BIND
+#define HCI_EVNT_RECV HCI_CMND_RECV
+#define HCI_EVNT_ACCEPT HCI_CMND_ACCEPT
+#define HCI_EVNT_LISTEN HCI_CMND_LISTEN
+#define HCI_EVNT_CONNECT HCI_CMND_CONNECT
+#define HCI_EVNT_SELECT HCI_CMND_BSD_SELECT
+#define HCI_EVNT_CLOSE_SOCKET HCI_CMND_CLOSE_SOCKET
+#define HCI_EVNT_RECVFROM HCI_CMND_RECVFROM
+#define HCI_EVNT_SETSOCKOPT HCI_CMND_SETSOCKOPT
+#define HCI_EVNT_GETSOCKOPT HCI_CMND_GETSOCKOPT
+#define HCI_EVNT_BSD_GETHOSTBYNAME HCI_CMND_GETHOSTNAME
+#define HCI_EVNT_MDNS_ADVERTISE HCI_CMND_MDNS_ADVERTISE
+
+#define HCI_EVNT_SEND 0x1003
+#define HCI_EVNT_WRITE 0x100E
+#define HCI_EVNT_SENDTO 0x100F
+
+#define HCI_EVNT_PATCHES_REQ 0x1000
+
+#define HCI_EVNT_UNSOL_BASE 0x4000
+
+#define HCI_EVNT_WLAN_UNSOL_BASE (0x8000)
+
+#define HCI_EVNT_WLAN_UNSOL_CONNECT (0x0001 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_UNSOL_DISCONNECT (0x0002 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_UNSOL_INIT (0x0004 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_TX_COMPLETE (0x0008 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_UNSOL_DHCP (0x0010 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_ASYNC_PING_REPORT (0x0040 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE (0x0080 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_WLAN_KEEPALIVE (0x0200 + HCI_EVNT_WLAN_UNSOL_BASE)
+#define HCI_EVNT_BSD_TCP_CLOSE_WAIT (0x0800 + HCI_EVNT_WLAN_UNSOL_BASE)
+
+#define HCI_EVNT_DATA_UNSOL_FREE_BUFF \
+ 0x4100
+
+#define HCI_EVNT_NVMEM_CREATE_ENTRY \
+ HCI_CMND_NVMEM_CREATE_ENTRY
+#define HCI_EVNT_NVMEM_SWAP_ENTRY HCI_CMND_NVMEM_SWAP_ENTRY
+
+#define HCI_EVNT_NVMEM_READ HCI_CMND_NVMEM_READ
+#define HCI_EVNT_NVMEM_WRITE (0x0202)
+
+#define HCI_EVNT_READ_SP_VERSION \
+ HCI_CMND_READ_SP_VERSION
+
+#define HCI_EVNT_INPROGRESS 0xFFFF
+
+
+#define HCI_DATA_RECVFROM 0x84
+#define HCI_DATA_RECV 0x85
+#define HCI_DATA_NVMEM 0x91
+
+#define HCI_EVENT_CC3000_CAN_SHUT_DOWN 0x99
+
+// Prototypes for the structures for HCI APIs.
+#define HCI_DATA_HEADER_SIZE (5)
+#define HCI_EVENT_HEADER_SIZE (5)
+#define HCI_DATA_CMD_HEADER_SIZE (5)
+#define HCI_PATCH_HEADER_SIZE (6)
+
+#define HCI_PACKET_TYPE_OFFSET (0)
+#define HCI_PACKET_ARGSIZE_OFFSET (2)
+#define HCI_PACKET_LENGTH_OFFSET (3)
+
+
+#define HCI_EVENT_OPCODE_OFFSET (1)
+#define HCI_EVENT_LENGTH_OFFSET (3)
+#define HCI_EVENT_STATUS_OFFSET (4)
+#define HCI_DATA_LENGTH_OFFSET (3)
+
+#endif