A software I2C interface which is a drop-in replacement for the regular mbed I2C interface in case you run out of I2C ports

Dependents:   Luminocity laser-tag

This is a first version. Doesn't mean more versions will come, mainly means it may be a bit buggy. If it does not work for you: first try exactly the same code with the regular hardware I2C. If that does work, well then I made an error somewhere :D. You can send me a message if you can't figure it out, although without your hardware it generally is hard for me to reproduce.

While basic I2C should work, advanced things like clock stretching and multi-master I2C busses are not supported.

If you find an error and solve it: Send a pull request and I generally will accept it :).

Files at this revision

API Documentation at this revision

Comitter:
Sissors
Date:
Mon Nov 28 19:55:30 2016 +0000
Parent:
0:fee70b6fe0e9
Commit message:
Changed scl to push pull during transactions
; More efficient and we don't support clock stretching anyway
; Using OpenDrain mode maybe for future, however is device dependent

Changed in this revision

SoftI2C.cpp Show annotated file Show diff for this revision Revisions of this file
diff -r fee70b6fe0e9 -r 05473196d133 SoftI2C.cpp
--- a/SoftI2C.cpp	Tue Nov 22 20:45:35 2016 +0000
+++ b/SoftI2C.cpp	Mon Nov 28 19:55:30 2016 +0000
@@ -59,11 +59,11 @@
 
 int SoftI2C::read(int ack) {
     int retval = 0;
+    _scl.output();
     
     // Shift the bits out, msb first
     for (int i = 7; i>=0; i--) {
         //SCL low
-        _scl.output();
         _scl.write(0);
         _sda.input();
         wait_us(delay_us);
@@ -73,12 +73,11 @@
         wait_us(delay_us);
         
         //SCL high again
-        _scl.input();
+        _scl.write(1);
         wait_us(delay_us << 1); //wait two delays
     }
     
     // Last cycle to set the ACK
-    _scl.output();
     _scl.write(0);
     if ( ack ) {
         _sda.output();
@@ -88,7 +87,7 @@
     }
     wait_us(delay_us << 1);
     
-    _scl.input();
+    _scl.write(1);
     wait_us(delay_us << 1);
 
     
@@ -96,10 +95,11 @@
 }
 
 int SoftI2C::write(int data) {
+     _scl.output();
+     
     // Shift the bits out, msb first
     for (int i = 7; i>=0; i--) {
         //SCL low
-        _scl.output();
         _scl.write(0);
         wait_us(delay_us);
         
@@ -113,19 +113,18 @@
         wait_us(delay_us);
         
         //SCL high again
-        _scl.input();
+        _scl.write(1);
         wait_us(delay_us << 1); //wait two delays
     }
     
     // Last cycle to get the ACK
-    _scl.output();
     _scl.write(0);
     wait_us(delay_us);
     
     _sda.input();
     wait_us(delay_us);
     
-    _scl.input();
+    _scl.write(1);
     wait_us(delay_us);
     int retval = ~_sda.read(); //Read the ack
     wait_us(delay_us);
@@ -140,7 +139,7 @@
         _scl.output();
         _scl.write(0);
         wait_us(delay_us << 1);
-        _scl.input();
+        _scl.write(1);
         wait_us(delay_us << 1);
     }
     // Pull SDA low