Diff: FreescaleIAP/FreescaleIAP.h

Revision:

10:fb5121bcc468

Parent:

8:00cefe0d59ed

diff -r 56ed3a56ecc3 -r fb5121bcc468 FreescaleIAP/FreescaleIAP.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/FreescaleIAP/FreescaleIAP.h	Sun Apr 24 12:46:37 2016 +0000
@@ -0,0 +1,59 @@
+#ifndef FREESCALEIAP_H
+#define FREESCALEIAP_H
+
+#include "mbed.h"
+
+#if defined(TARGET_KLXX) | defined(TARGET_K20D50M)
+#define SECTOR_SIZE     1024
+#elif (TARGET_K22F)
+#define SECTOR_SIZE     2048
+#elif defined(TARGET_K64F)
+#define SECTOR_SIZE     4096
+#else
+#warning FreescaleIAP unknown target, using default 1024B
+#define SECTOR_SIZE     1024
+#endif
+
+enum IAPCode {
+    BoundaryError = -99,    //Commands may not span several sectors
+    AlignError,             //Data must be aligned on longword (two LSBs zero)
+    ProtectionError,        //Flash sector is protected
+    AccessError,            //Something went wrong
+    CollisionError,         //During writing something tried to flash which was written to
+    LengthError,            //The length must be multiples of 4
+    RuntimeError,           
+    EraseError,             //The flash was not erased before writing to it
+    Success = 0
+    };
+
+/** Erase a flash sector
+ *
+ * The size erased depends on the used device
+ *
+ * @param address address in the sector which needs to be erased
+ * @param return Success if no errors were encountered, otherwise one of the error states
+ */
+IAPCode erase_sector(int address);
+
+/** Program flash
+ *
+ * Before programming the used area needs to be erased. The erase state is checked
+ * before programming, and will return an error if not erased.
+ *
+ * @param address starting address where the data needs to be programmed (must be longword alligned: two LSBs must be zero)
+ * @param data pointer to array with the data to program
+ * @param length number of bytes to program (must be a multiple of 4. must be a multiple of 8 when K64F)
+ * @param return Success if no errors were encountered, otherwise one of the error states
+ */
+IAPCode program_flash(int address, char *data, unsigned int length);
+
+/**
+ * Returns size of flash memory
+ * 
+ * This is the first address which is not flash
+ *
+ * @param return length of flash memory in bytes
+ */
+uint32_t flash_size(void);
+
+#endif
\ No newline at end of file