doc/csv/build_option_codes_en_US.csv@0:8f0d870509fe, 2017-09-04 (annotated)
- Committer:
- Sergunb
- Date:
- Mon Sep 04 12:04:13 2017 +0000
- Revision:
- 0:8f0d870509fe
Initial commit
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| Sergunb | 0:8f0d870509fe | 1 | "OPT: Code"," Build-Option Description","State" |
| Sergunb | 0:8f0d870509fe | 2 | "V","Variable spindle","Enabled" |
| Sergunb | 0:8f0d870509fe | 3 | "N","Line numbers","Enabled" |
| Sergunb | 0:8f0d870509fe | 4 | "M","Mist coolant M7","Enabled" |
| Sergunb | 0:8f0d870509fe | 5 | "C","CoreXY","Enabled" |
| Sergunb | 0:8f0d870509fe | 6 | "P","Parking motion","Enabled" |
| Sergunb | 0:8f0d870509fe | 7 | "Z","Homing force origin","Enabled" |
| Sergunb | 0:8f0d870509fe | 8 | "H","Homing single axis commands","Enabled" |
| Sergunb | 0:8f0d870509fe | 9 | "T","Two limit switches on axis","Enabled" |
| Sergunb | 0:8f0d870509fe | 10 | "A","Allow feed rate overrides in probe cycles","Enabled" |
| Sergunb | 0:8f0d870509fe | 11 | "D","Use spindle direction as enable pin","Enabled" |
| Sergunb | 0:8f0d870509fe | 12 | "0","Spindle enable off when speed is zero","Enabled" |
| Sergunb | 0:8f0d870509fe | 13 | "S","Software limit pin debouncing","Enabled" |
| Sergunb | 0:8f0d870509fe | 14 | "R","Parking override control","Enabled" |
| Sergunb | 0:8f0d870509fe | 15 | "*","Restore all EEPROM command","Disabled" |
| Sergunb | 0:8f0d870509fe | 16 | "$","Restore EEPROM `$` settings command","Disabled" |
| Sergunb | 0:8f0d870509fe | 17 | "#","Restore EEPROM parameter data command","Disabled" |
| Sergunb | 0:8f0d870509fe | 18 | "I","Build info write user string command","Disabled" |
| Sergunb | 0:8f0d870509fe | 19 | "E","Force sync upon EEPROM write","Disabled" |
| Sergunb | 0:8f0d870509fe | 20 | "W","Force sync upon work coordinate offset change","Disabled" |
| Sergunb | 0:8f0d870509fe | 21 | "L","Homing initialization auto-lock","Disabled" |