Sergey Pastor / 1

Webserver+3d print

Dependents:   Nucleo

Embed: (wiki syntax)

« Back to documentation index

sam9263_eth.h File Reference
Data Structures | Functions | Variables

sam9263_eth.h File Reference

AT91SAM9263 Ethernet MAC controller. More...

Go to the source code of this file.

Data Structures

struct  Sam9263TxBufferDesc
 Transmit buffer descriptor. More...
struct  Sam9263RxBufferDesc
 Receive buffer descriptor. More...

Functions

error_t sam9263EthInit (NetInterface *interface)
 SAM9263 Ethernet MAC initialization.
void sam9263EthInitGpio (NetInterface *interface)
 GPIO configuration.
void sam9263EthInitBufferDesc (NetInterface *interface)
 Initialize buffer descriptors.
void sam9263EthTick (NetInterface *interface)
 SAM9263 Ethernet MAC timer handler.
void sam9263EthEnableIrq (NetInterface *interface)
 Enable interrupts.
void sam9263EthDisableIrq (NetInterface *interface)
 Disable interrupts.
void sam9263EthIrqHandler (void)
 SAM9263 Ethernet MAC interrupt service routine.
void sam9263EthEventHandler (NetInterface *interface)
 SAM9263 Ethernet MAC event handler.
error_t sam9263EthSendPacket (NetInterface *interface, const NetBuffer *buffer, size_t offset)
 Send a packet.
error_t sam9263EthReceivePacket (NetInterface *interface)
 Receive a packet.
error_t sam9263EthSetMulticastFilter (NetInterface *interface)
 Configure multicast MAC address filtering.
error_t sam9263EthUpdateMacConfig (NetInterface *interface)
 Adjust MAC configuration parameters for proper operation.
void sam9263EthWritePhyReg (uint8_t phyAddr, uint8_t regAddr, uint16_t data)
 Write PHY register.
uint16_t sam9263EthReadPhyReg (uint8_t phyAddr, uint8_t regAddr)
 Read PHY register.

Variables

const NicDriver sam9263EthDriver
 SAM9263 Ethernet MAC driver.

Detailed Description

AT91SAM9263 Ethernet MAC controller.

License

Copyright (C) 2010-2017 Oryx Embedded SARL. All rights reserved.

This file is part of CycloneTCP Open.

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

Author:
Oryx Embedded SARL (www.oryx-embedded.com)
Version:
1.7.6

Definition in file sam9263_eth.h.

Function Documentation

void sam9263EthDisableIrq ( NetInterface *  interface )

Disable interrupts.

Parameters:
[in]interfaceUnderlying network interface

Definition at line 305 of file sam9263_eth.c.

void sam9263EthEnableIrq ( NetInterface *  interface )

Enable interrupts.

Parameters:
[in]interfaceUnderlying network interface

Definition at line 291 of file sam9263_eth.c.

void sam9263EthEventHandler ( NetInterface *  interface )

SAM9263 Ethernet MAC event handler.

Parameters:
[in]interfaceUnderlying network interface

Definition at line 374 of file sam9263_eth.c.

error_t sam9263EthInit ( NetInterface *  interface )

SAM9263 Ethernet MAC initialization.

Parameters:
[in]interfaceUnderlying network interface
Returns:
Error code

Definition at line 113 of file sam9263_eth.c.

void sam9263EthInitBufferDesc ( NetInterface *  interface )

Initialize buffer descriptors.

Parameters:
[in]interfaceUnderlying network interface

Definition at line 226 of file sam9263_eth.c.

void sam9263EthInitGpio ( NetInterface *  interface )

GPIO configuration.

Parameters:
[in]interfaceUnderlying network interface

Definition at line 196 of file sam9263_eth.c.

void sam9263EthIrqHandler ( void   )

SAM9263 Ethernet MAC interrupt service routine.

Definition at line 318 of file sam9263_eth.c.

uint16_t sam9263EthReadPhyReg ( uint8_t  phyAddr,
uint8_t  regAddr 
)

Read PHY register.

Parameters:
[in]phyAddrPHY address
[in]regAddrRegister address
Returns:
Register value

Definition at line 711 of file sam9263_eth.c.

error_t sam9263EthReceivePacket ( NetInterface *  interface )

Receive a packet.

Parameters:
[in]interfaceUnderlying network interface
Returns:
Error code

Definition at line 473 of file sam9263_eth.c.

error_t sam9263EthSendPacket ( NetInterface *  interface,
const NetBuffer *  buffer,
size_t  offset 
)

Send a packet.

Parameters:
[in]interfaceUnderlying network interface
[in]bufferMulti-part buffer containing the data to send
[in]offsetOffset to the first data byte
Returns:
Error code

Definition at line 408 of file sam9263_eth.c.

error_t sam9263EthSetMulticastFilter ( NetInterface *  interface )

Configure multicast MAC address filtering.

Parameters:
[in]interfaceUnderlying network interface
Returns:
Error code

Definition at line 587 of file sam9263_eth.c.

void sam9263EthTick ( NetInterface *  interface )

SAM9263 Ethernet MAC timer handler.

This routine is periodically called by the TCP/IP stack to handle periodic operations such as polling the link state

Parameters:
[in]interfaceUnderlying network interface

Definition at line 279 of file sam9263_eth.c.

error_t sam9263EthUpdateMacConfig ( NetInterface *  interface )

Adjust MAC configuration parameters for proper operation.

Parameters:
[in]interfaceUnderlying network interface
Returns:
Error code

Definition at line 650 of file sam9263_eth.c.

void sam9263EthWritePhyReg ( uint8_t  phyAddr,
uint8_t  regAddr,
uint16_t  data 
)

Write PHY register.

Parameters:
[in]phyAddrPHY address
[in]regAddrRegister address
[in]dataRegister value

Definition at line 684 of file sam9263_eth.c.

Variable Documentation

const NicDriver sam9263EthDriver

SAM9263 Ethernet MAC driver.

Definition at line 86 of file sam9263_eth.c.

Generated on Tue Jul 12 2022 17:10:22 by  doxygen 1.7.2