Webserver+3d print

Dependents:   Nucleo

Embed: (wiki syntax)

« Back to documentation index

rx63n_eth.c File Reference

rx63n_eth.c File Reference

Renesas RX63N Ethernet MAC controller. More...

Go to the source code of this file.

Functions

error_t rx63nEthInit (NetInterface *interface)
 RX63N Ethernet MAC initialization.
void rx63nEthInitGpio (NetInterface *interface)
 GPIO configuration.
void rx63nEthInitDmaDesc (NetInterface *interface)
 Initialize DMA descriptor lists.
void rx63nEthTick (NetInterface *interface)
 RX63N Ethernet MAC timer handler.
void rx63nEthEnableIrq (NetInterface *interface)
 Enable interrupts.
void rx63nEthDisableIrq (NetInterface *interface)
 Disable interrupts.
__interrupt void rx63nEthIrqHandler (void)
 RX63N Ethernet MAC interrupt service routine.
void rx63nEthEventHandler (NetInterface *interface)
 RX63N Ethernet MAC event handler.
error_t rx63nEthSendPacket (NetInterface *interface, const NetBuffer *buffer, size_t offset)
 Send a packet.
error_t rx63nEthReceivePacket (NetInterface *interface)
 Receive a packet.
error_t rx63nEthSetMulticastFilter (NetInterface *interface)
 Configure multicast MAC address filtering.
error_t rx63nEthUpdateMacConfig (NetInterface *interface)
 Adjust MAC configuration parameters for proper operation.
void rx63nEthWritePhyReg (uint8_t phyAddr, uint8_t regAddr, uint16_t data)
 Write PHY register.
uint16_t rx63nEthReadPhyReg (uint8_t phyAddr, uint8_t regAddr)
 Read PHY register.
void rx63nEthWriteSmi (uint32_t data, uint_t length)
 SMI write operation.
uint32_t rx63nEthReadSmi (uint_t length)
 SMI read operation.

Variables

const NicDriver rx63nEthDriver
 RX63N Ethernet MAC driver.

Detailed Description

Renesas RX63N Ethernet MAC controller.

License

Copyright (C) 2010-2017 Oryx Embedded SARL. All rights reserved.

This file is part of CycloneTCP Open.

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

Author:
Oryx Embedded SARL (www.oryx-embedded.com)
Version:
1.7.6

Definition in file rx63n_eth.c.


Function Documentation

void rx63nEthDisableIrq ( NetInterface *  interface )

Disable interrupts.

Parameters:
[in]interfaceUnderlying network interface

Definition at line 357 of file rx63n_eth.c.

void rx63nEthEnableIrq ( NetInterface *  interface )

Enable interrupts.

Parameters:
[in]interfaceUnderlying network interface

Definition at line 343 of file rx63n_eth.c.

void rx63nEthEventHandler ( NetInterface *  interface )

RX63N Ethernet MAC event handler.

Parameters:
[in]interfaceUnderlying network interface

Definition at line 421 of file rx63n_eth.c.

error_t rx63nEthInit ( NetInterface *  interface )

RX63N Ethernet MAC initialization.

Parameters:
[in]interfaceUnderlying network interface
Returns:
Error code

Definition at line 113 of file rx63n_eth.c.

void rx63nEthInitDmaDesc ( NetInterface *  interface )

Initialize DMA descriptor lists.

Parameters:
[in]interfaceUnderlying network interface

Definition at line 275 of file rx63n_eth.c.

void rx63nEthInitGpio ( NetInterface *  interface )

GPIO configuration.

Parameters:
[in]interfaceUnderlying network interface

Definition at line 209 of file rx63n_eth.c.

__interrupt void rx63nEthIrqHandler ( void   )

RX63N Ethernet MAC interrupt service routine.

Definition at line 371 of file rx63n_eth.c.

uint16_t rx63nEthReadPhyReg ( uint8_t  phyAddr,
uint8_t  regAddr 
)

Read PHY register.

Parameters:
[in]phyAddrPHY address
[in]regAddrRegister address
Returns:
Register value

Definition at line 688 of file rx63n_eth.c.

uint32_t rx63nEthReadSmi ( uint_t  length )

SMI read operation.

Parameters:
[in]lengthNumber of bits to be read
Returns:
Data resulting from the MDIO read operation

Definition at line 756 of file rx63n_eth.c.

error_t rx63nEthReceivePacket ( NetInterface *  interface )

Receive a packet.

Parameters:
[in]interfaceUnderlying network interface
Returns:
Error code

Definition at line 521 of file rx63n_eth.c.

error_t rx63nEthSendPacket ( NetInterface *  interface,
const NetBuffer buffer,
size_t  offset 
)

Send a packet.

Parameters:
[in]interfaceUnderlying network interface
[in]bufferMulti-part buffer containing the data to send
[in]offsetOffset to the first data byte
Returns:
Error code

Definition at line 455 of file rx63n_eth.c.

error_t rx63nEthSetMulticastFilter ( NetInterface *  interface )

Configure multicast MAC address filtering.

Parameters:
[in]interfaceUnderlying network interface
Returns:
Error code

Definition at line 595 of file rx63n_eth.c.

void rx63nEthTick ( NetInterface *  interface )

RX63N Ethernet MAC timer handler.

This routine is periodically called by the TCP/IP stack to handle periodic operations such as polling the link state

Parameters:
[in]interfaceUnderlying network interface

Definition at line 331 of file rx63n_eth.c.

error_t rx63nEthUpdateMacConfig ( NetInterface *  interface )

Adjust MAC configuration parameters for proper operation.

Parameters:
[in]interfaceUnderlying network interface
Returns:
Error code

Definition at line 634 of file rx63n_eth.c.

void rx63nEthWritePhyReg ( uint8_t  phyAddr,
uint8_t  regAddr,
uint16_t  data 
)

Write PHY register.

Parameters:
[in]phyAddrPHY address
[in]regAddrRegister address
[in]dataRegister value

Definition at line 660 of file rx63n_eth.c.

void rx63nEthWriteSmi ( uint32_t  data,
uint_t  length 
)

SMI write operation.

Parameters:
[in]dataRaw data to be written
[in]lengthNumber of bits to be written

Definition at line 720 of file rx63n_eth.c.


Variable Documentation