Dependents:   Nucleo

Embed: (wiki syntax)

« Back to documentation index

lpc178x_eth.c File Reference

lpc178x_eth.c File Reference

LPC1786/88 Ethernet MAC controller. More...

Go to the source code of this file.

Functions

error_t lpc178xEthInit (NetInterface *interface)
 LPC178x Ethernet MAC initialization.
void lpc178xEthInitGpio (NetInterface *interface)
 GPIO configuration.
void lpc178xEthInitDesc (NetInterface *interface)
 Initialize TX and RX descriptors.
void lpc178xEthTick (NetInterface *interface)
 LPC178x Ethernet MAC timer handler.
void lpc178xEthEnableIrq (NetInterface *interface)
 Enable interrupts.
void lpc178xEthDisableIrq (NetInterface *interface)
 Disable interrupts.
void ENET_IRQHandler (void)
 LPC178x Ethernet MAC interrupt service routine.
void lpc178xEthEventHandler (NetInterface *interface)
 LPC178x Ethernet MAC event handler.
error_t lpc178xEthSendPacket (NetInterface *interface, const NetBuffer *buffer, size_t offset)
 Send a packet.
error_t lpc178xEthReceivePacket (NetInterface *interface)
 Receive a packet.
error_t lpc178xEthSetMulticastFilter (NetInterface *interface)
 Configure multicast MAC address filtering.
error_t lpc178xEthUpdateMacConfig (NetInterface *interface)
 Adjust MAC configuration parameters for proper operation.
void lpc178xEthWritePhyReg (uint8_t phyAddr, uint8_t regAddr, uint16_t data)
 Write PHY register.
uint16_t lpc178xEthReadPhyReg (uint8_t phyAddr, uint8_t regAddr)
 Read PHY register.
uint32_t lpc178xEthCalcCrc (const void *data, size_t length)
 CRC calculation.

Variables

const NicDriver lpc178xEthDriver
 LPC178x Ethernet MAC driver.

Detailed Description

LPC1786/88 Ethernet MAC controller.

License

Copyright (C) 2010-2017 Oryx Embedded SARL. All rights reserved.

This file is part of CycloneTCP Open.

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

Author:
Oryx Embedded SARL (www.oryx-embedded.com)
Version:
1.7.6

Definition in file lpc178x_eth.c.


Function Documentation

void ENET_IRQHandler ( void   )

LPC178x Ethernet MAC interrupt service routine.

Definition at line 340 of file lpc178x_eth.c.

uint32_t lpc178xEthCalcCrc ( const void *  data,
size_t  length 
)

CRC calculation.

Parameters:
[in]dataPointer to the data over which to calculate the CRC
[in]lengthNumber of bytes to process
Returns:
Resulting CRC value

Definition at line 697 of file lpc178x_eth.c.

void lpc178xEthDisableIrq ( NetInterface *  interface )

Disable interrupts.

Parameters:
[in]interfaceUnderlying network interface

Definition at line 327 of file lpc178x_eth.c.

void lpc178xEthEnableIrq ( NetInterface *  interface )

Enable interrupts.

Parameters:
[in]interfaceUnderlying network interface

Definition at line 313 of file lpc178x_eth.c.

void lpc178xEthEventHandler ( NetInterface *  interface )

LPC178x Ethernet MAC event handler.

Parameters:
[in]interfaceUnderlying network interface

Definition at line 398 of file lpc178x_eth.c.

error_t lpc178xEthInit ( NetInterface *  interface )

LPC178x Ethernet MAC initialization.

Parameters:
[in]interfaceUnderlying network interface
Returns:
Error code

Definition at line 119 of file lpc178x_eth.c.

void lpc178xEthInitDesc ( NetInterface *  interface )

Initialize TX and RX descriptors.

Parameters:
[in]interfaceUnderlying network interface

Definition at line 250 of file lpc178x_eth.c.

void lpc178xEthInitGpio ( NetInterface *  interface )

GPIO configuration.

Parameters:
[in]interfaceUnderlying network interface

Definition at line 215 of file lpc178x_eth.c.

uint16_t lpc178xEthReadPhyReg ( uint8_t  phyAddr,
uint8_t  regAddr 
)

Read PHY register.

Parameters:
[in]phyAddrPHY address
[in]regAddrRegister address
Returns:
Register value

Definition at line 671 of file lpc178x_eth.c.

error_t lpc178xEthReceivePacket ( NetInterface *  interface )

Receive a packet.

Parameters:
[in]interfaceUnderlying network interface
Returns:
Error code

Definition at line 509 of file lpc178x_eth.c.

error_t lpc178xEthSendPacket ( NetInterface *  interface,
const NetBuffer buffer,
size_t  offset 
)

Send a packet.

Parameters:
[in]interfaceUnderlying network interface
[in]bufferMulti-part buffer containing the data to send
[in]offsetOffset to the first data byte
Returns:
Error code

Definition at line 431 of file lpc178x_eth.c.

error_t lpc178xEthSetMulticastFilter ( NetInterface *  interface )

Configure multicast MAC address filtering.

Parameters:
[in]interfaceUnderlying network interface
Returns:
Error code

Definition at line 556 of file lpc178x_eth.c.

void lpc178xEthTick ( NetInterface *  interface )

LPC178x Ethernet MAC timer handler.

This routine is periodically called by the TCP/IP stack to handle periodic operations such as polling the link state

Parameters:
[in]interfaceUnderlying network interface

Definition at line 301 of file lpc178x_eth.c.

error_t lpc178xEthUpdateMacConfig ( NetInterface *  interface )

Adjust MAC configuration parameters for proper operation.

Parameters:
[in]interfaceUnderlying network interface
Returns:
Error code

Definition at line 609 of file lpc178x_eth.c.

void lpc178xEthWritePhyReg ( uint8_t  phyAddr,
uint8_t  regAddr,
uint16_t  data 
)

Write PHY register.

Parameters:
[in]phyAddrPHY address
[in]regAddrRegister address
[in]dataRegister value

Definition at line 647 of file lpc178x_eth.c.


Variable Documentation