Sergey Pastor
Webserver+3d print
Diff: cyclone_tcp/ipv6/slaac.c
- Revision:
- 0:8918a71cdbe9
diff -r 000000000000 -r 8918a71cdbe9 cyclone_tcp/ipv6/slaac.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/cyclone_tcp/ipv6/slaac.c Sat Feb 04 18:15:49 2017 +0000
@@ -0,0 +1,662 @@
+/**
+ * @file slaac.c
+ * @brief IPv6 Stateless Address Autoconfiguration
+ *
+ * @section License
+ *
+ * Copyright (C) 2010-2017 Oryx Embedded SARL. All rights reserved.
+ *
+ * This file is part of CycloneTCP Open.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * @section Description
+ *
+ * Stateless Address Autoconfiguration is a facility to allow devices to
+ * configure themselves independently. Refer to the following RFCs for
+ * complete details:
+ * - RFC 4862: IPv6 Stateless Address Autoconfiguration
+ * - RFC 6106: IPv6 Router Advertisement Options for DNS Configuration
+ *
+ * @author Oryx Embedded SARL (www.oryx-embedded.com)
+ * @version 1.7.6
+ **/
+
+//Switch to the appropriate trace level
+#define TRACE_LEVEL SLAAC_TRACE_LEVEL
+
+//Dependencies
+#include "core/net.h"
+#include "core/ethernet.h"
+#include "ipv6/ipv6.h"
+#include "ipv6/ipv6_misc.h"
+#include "ipv6/slaac.h"
+#include "ipv6/ndp.h"
+#include "ipv6/ndp_misc.h"
+#include "debug.h"
+
+//Check TCP/IP stack configuration
+#if (IPV6_SUPPORT == ENABLED && SLAAC_SUPPORT == ENABLED)
+
+
+/**
+ * @brief Initialize settings with default values
+ * @param[out] settings Structure that contains SLAAC settings
+ **/
+
+void slaacGetDefaultSettings(SlaacSettings *settings)
+{
+ //Use default interface
+ settings->interface = netGetDefaultInterface();
+
+ //Use the DNS servers specified by the RDNSS option
+ settings->manualDnsConfig = FALSE;
+ //Link state change event
+ settings->linkChangeEvent = NULL;
+ //Router Advertisement parsing callback
+ settings->parseRouterAdvCallback = NULL;
+}
+
+
+/**
+ * @brief SLAAC initialization
+ * @param[in] context Pointer to the SLAAC context
+ * @param[in] settings SLAAC specific settings
+ * @return Error code
+ **/
+
+error_t slaacInit(SlaacContext *context, const SlaacSettings *settings)
+{
+ NetInterface *interface;
+
+ //Debug message
+ TRACE_INFO("Initializing SLAAC...\r\n");
+
+ //Ensure the parameters are valid
+ if(context == NULL || settings == NULL)
+ return ERROR_INVALID_PARAMETER;
+
+ //A valid pointer to the interface being configured is required
+ if(settings->interface == NULL)
+ return ERROR_INVALID_PARAMETER;
+
+ //Point to the underlying network interface
+ interface = settings->interface;
+
+ //Clear the SLAAC context
+ memset(context, 0, sizeof(SlaacContext));
+ //Save user settings
+ context->settings = *settings;
+
+ //SLAAC operation is currently suspended
+ context->running = FALSE;
+
+ //Attach the SLAAC context to the network interface
+ interface->slaacContext = context;
+
+ //Successful initialization
+ return NO_ERROR;
+}
+
+
+/**
+ * @brief Start SLAAC process
+ * @param[in] context Pointer to the SLAAC context
+ * @return Error code
+ **/
+
+error_t slaacStart(SlaacContext *context)
+{
+ NetInterface *interface;
+
+ //Check parameter
+ if(context == NULL)
+ return ERROR_INVALID_PARAMETER;
+
+ //Debug message
+ TRACE_INFO("Starting SLAAC...\r\n");
+
+ //Get exclusive access
+ osAcquireMutex(&netMutex);
+
+ //Point to the underlying network interface
+ interface = context->settings.interface;
+
+ //Clear the list of IPv6 addresses
+ ipv6FlushAddrList(interface);
+
+ //Automatic DNS server configuration?
+ if(!context->settings.manualDnsConfig)
+ {
+ //Clear the list of DNS servers
+ ipv6FlushDnsServerList(interface);
+ }
+
+ //Check if the link is up?
+ if(interface->linkState)
+ {
+ //A link-local address is formed by combining the well-known
+ //link-local prefix fe80::/10 with the interface identifier
+ slaacGenerateLinkLocalAddr(context);
+ }
+
+ //Start SLAAC operation
+ context->running = TRUE;
+
+ //Release exclusive access
+ osReleaseMutex(&netMutex);
+
+ //Successful processing
+ return NO_ERROR;
+}
+
+
+/**
+ * @brief Stop SLAAC process
+ * @param[in] context Pointer to the SLAAC context
+ * @return Error code
+ **/
+
+error_t slaacStop(SlaacContext *context)
+{
+ //Check parameter
+ if(context == NULL)
+ return ERROR_INVALID_PARAMETER;
+
+ //Debug message
+ TRACE_INFO("Stopping SLAAC...\r\n");
+
+ //Get exclusive access
+ osAcquireMutex(&netMutex);
+
+ //Suspend SLAAC operation
+ context->running = FALSE;
+
+ //Release exclusive access
+ osReleaseMutex(&netMutex);
+
+ //Successful processing
+ return NO_ERROR;
+}
+
+
+/**
+ * @brief Callback function for link change event
+ * @param[in] context Pointer to the SLAAC context
+ **/
+
+void slaacLinkChangeEvent(SlaacContext *context)
+{
+ NetInterface *interface;
+
+ //Make sure the SLAAC service has been properly instantiated
+ if(context == NULL)
+ return;
+
+ //Point to the underlying network interface
+ interface = context->settings.interface;
+
+ //Check whether SLAAC is enabled
+ if(context->running)
+ {
+ //Automatic DNS server configuration?
+ if(!context->settings.manualDnsConfig)
+ {
+ //Clear the list of DNS servers
+ ipv6FlushDnsServerList(interface);
+ }
+
+ //Link-up event?
+ if(interface->linkState)
+ {
+ //A link-local address is formed by combining the well-known
+ //link-local prefix fe80::/10 with the interface identifier
+ slaacGenerateLinkLocalAddr(context);
+ }
+ }
+
+ //Any registered callback?
+ if(context->settings.linkChangeEvent != NULL)
+ {
+ //Release exclusive access
+ osReleaseMutex(&netMutex);
+ //Invoke user callback function
+ context->settings.linkChangeEvent(context, interface, interface->linkState);
+ //Get exclusive access
+ osAcquireMutex(&netMutex);
+ }
+}
+
+
+/**
+ * @brief Parse Router Advertisement message
+ * @param[in] context Pointer to the SLAAC context
+ * @param[in] message Pointer to the Router Advertisement message
+ * @param[in] length Length of the message, in bytes
+ **/
+
+void slaacParseRouterAdv(SlaacContext *context,
+ NdpRouterAdvMessage *message, size_t length)
+{
+ uint_t i;
+ uint_t n;
+ NetInterface *interface;
+ NdpPrefixInfoOption *prefixInfoOption;
+ NdpRdnssOption *rdnssOption;
+
+ //Point to the underlying network interface
+ interface = context->settings.interface;
+
+ //Check whether SLAAC is enabled
+ if(!context->running)
+ return;
+
+ //Make sure that a valid link-local address has been assigned to the interface
+ if(ipv6GetLinkLocalAddrState(interface) != IPV6_ADDR_STATE_PREFERRED)
+ return;
+
+ //Calculate the length of the Options field
+ length -= sizeof(NdpRouterAdvMessage);
+
+ //This flag tracks changes in IPv6 configuration
+ context->configUpdated = FALSE;
+
+ //Point to the beginning of the Options field
+ n = 0;
+
+ //Parse Options field
+ while(1)
+ {
+ //Search the Options field for any Prefix Information options
+ prefixInfoOption = ndpGetOption(message->options + n,
+ length - n, NDP_OPT_PREFIX_INFORMATION);
+
+ //No more option of the specified type?
+ if(prefixInfoOption == NULL)
+ break;
+
+ //Parse the Prefix Information Option
+ slaacParsePrefixInfoOption(context, prefixInfoOption);
+
+ //Retrieve the offset to the current position
+ n = (uint8_t *) prefixInfoOption - message->options;
+ //Jump to the next option
+ n += prefixInfoOption->length * 8;
+ }
+
+ //Automatic DNS server configuration?
+ if(!context->settings.manualDnsConfig)
+ {
+ //Search for the Recursive DNS Server (RDNSS) option
+ rdnssOption = ndpGetOption(message->options, length,
+ NDP_OPT_RECURSIVE_DNS_SERVER);
+
+ //RDNSS option found?
+ if(rdnssOption != NULL && rdnssOption->length >= 1)
+ {
+ //Retrieve the number of addresses
+ n = (rdnssOption->length - 1) / 2;
+
+ //Loop through the list of DNS servers
+ for(i = 0; i < n && i < IPV6_DNS_SERVER_LIST_SIZE; i++)
+ {
+ //Record DNS server address
+ interface->ipv6Context.dnsServerList[i] = rdnssOption->address[i];
+ }
+ }
+ }
+
+ //Any registered callback?
+ if(context->settings.parseRouterAdvCallback != NULL)
+ {
+ //Invoke user callback function
+ context->settings.parseRouterAdvCallback(context, message, length);
+ }
+
+ //Check whether a new IPv6 address has been assigned to the interface
+ if(context->configUpdated)
+ {
+ //Dump current IPv6 configuration for debugging purpose
+ slaacDumpConfig(context);
+ }
+}
+
+
+/**
+ * @brief Parse Prefix Information Option
+ * @param[in] context Pointer to the SLAAC context
+ * @param[in] option Pointer to the Prefix Information option
+ **/
+
+void slaacParsePrefixInfoOption(SlaacContext *context,
+ NdpPrefixInfoOption *option)
+{
+ uint_t i;
+ bool_t found;
+ systime_t time;
+ systime_t validLifetime;
+ systime_t preferredLifetime;
+ systime_t remainingLifetime;
+ NetInterface *interface;
+ Ipv6AddrEntry *entry;
+ Ipv6Addr addr;
+
+ //Make sure the Prefix Information option is valid
+ if(option == NULL || option->length != 4)
+ return;
+
+ //If the Autonomous flag is not set, silently ignore the Prefix
+ //Information option
+ if(!option->a)
+ return;
+
+ //If the prefix is the link-local prefix, silently ignore the
+ //Prefix Information option
+ if(ipv6CompPrefix(&option->prefix, &IPV6_LINK_LOCAL_ADDR_PREFIX, 10))
+ return;
+
+ //Check whether the valid lifetime is zero
+ if(ntohl(option->validLifetime) == 0)
+ return;
+
+ //If the preferred lifetime is greater than the valid lifetime,
+ //silently ignore the Prefix Information option
+ if(ntohl(option->preferredLifetime) > ntohl(option->validLifetime))
+ return;
+
+ //If the sum of the prefix length and interface identifier length does
+ //not equal 128 bits, the Prefix Information option must be ignored
+ if(option->prefixLength != 64)
+ return;
+
+ //Get current time
+ time = osGetSystemTime();
+
+ //Point to the underlying network interface
+ interface = context->settings.interface;
+
+ //Form an address by combining the advertised prefix
+ //with the interface identifier
+ addr.w[0] = option->prefix.w[0];
+ addr.w[1] = option->prefix.w[1];
+ addr.w[2] = option->prefix.w[2];
+ addr.w[3] = option->prefix.w[3];
+ addr.w[4] = interface->eui64.w[0];
+ addr.w[5] = interface->eui64.w[1];
+ addr.w[6] = interface->eui64.w[2];
+ addr.w[7] = interface->eui64.w[3];
+
+ //Convert Valid Lifetime to host byte order
+ validLifetime = ntohl(option->validLifetime);
+
+ //Check the valid lifetime
+ if(validLifetime != NDP_INFINITE_LIFETIME)
+ {
+ //The length of time in seconds that the prefix is valid
+ //for the purpose of on-link determination
+ if(validLifetime < (MAX_DELAY / 1000))
+ validLifetime *= 1000;
+ else
+ validLifetime = MAX_DELAY;
+ }
+ else
+ {
+ //A value of all one bits (0xffffffff) represents infinity
+ validLifetime = INFINITE_DELAY;
+ }
+
+ //Convert Preferred Lifetime to host byte order
+ preferredLifetime = ntohl(option->preferredLifetime);
+
+ //Check the preferred lifetime
+ if(preferredLifetime != NDP_INFINITE_LIFETIME)
+ {
+ //The length of time in seconds that addresses generated from the
+ //prefix via stateless address autoconfiguration remain preferred
+ if(preferredLifetime < (MAX_DELAY / 1000))
+ preferredLifetime *= 1000;
+ else
+ preferredLifetime = MAX_DELAY;
+ }
+ else
+ {
+ //A value of all one bits (0xffffffff) represents infinity
+ preferredLifetime = INFINITE_DELAY;
+ }
+
+ //This flag will be set if the advertised prefix matches an address
+ //assigned to the interface
+ found = FALSE;
+
+ //Loop through the list of IPv6 addresses
+ for(i = 1; i < IPV6_ADDR_LIST_SIZE; i++)
+ {
+ //Point to the current entry
+ entry = &interface->ipv6Context.addrList[i];
+
+ //Check whether the advertised prefix is equal to the prefix of an
+ //address configured by stateless autoconfiguration in the list
+ if(ipv6CompPrefix(&entry->addr, &option->prefix, option->prefixLength))
+ {
+ //Valid address?
+ if(entry->state == IPV6_ADDR_STATE_PREFERRED ||
+ entry->state == IPV6_ADDR_STATE_DEPRECATED)
+ {
+ //Set flag
+ found = TRUE;
+
+ //The preferred lifetime of the address is reset to the Preferred
+ //Lifetime in the received advertisement
+ entry->preferredLifetime = preferredLifetime;
+
+ //Compute the remaining time to the valid lifetime expiration
+ //of the previously autoconfigured address
+ if(timeCompare(time, entry->timestamp + entry->validLifetime) < 0)
+ remainingLifetime = entry->timestamp + entry->validLifetime - time;
+ else
+ remainingLifetime = 0;
+
+ //The specific action to perform for the valid lifetime of the
+ //address depends on the Valid Lifetime in the received Router
+ //Advertisement and the remaining time
+ if(validLifetime > SLAAC_LIFETIME_2_HOURS ||
+ validLifetime > remainingLifetime)
+ {
+ //If the received Valid Lifetime is greater than 2 hours or
+ //greater than remaining lifetime, set the valid lifetime of
+ //the corresponding address to the advertised Valid Lifetime
+ entry->validLifetime = validLifetime;
+
+ //Save current time
+ entry->timestamp = time;
+ //Update the state of the IPv6 address
+ entry->state = IPV6_ADDR_STATE_PREFERRED;
+ }
+ else if(remainingLifetime <= SLAAC_LIFETIME_2_HOURS)
+ {
+ //If remaining lifetime is less than or equal to 2 hours, ignore
+ //the Prefix Information option with regards to the valid lifetime
+ }
+ else
+ {
+ //Otherwise, reset the valid lifetime of the corresponding
+ //address to 2 hours
+ entry->validLifetime = SLAAC_LIFETIME_2_HOURS;
+
+ //Save current time
+ entry->timestamp = time;
+ //Update the state of the IPv6 address
+ entry->state = IPV6_ADDR_STATE_PREFERRED;
+ }
+ }
+ //Tentative address?
+ else if(entry->state == IPV6_ADDR_STATE_TENTATIVE)
+ {
+ //Do not update the preferred and valid lifetimes of the address
+ //when Duplicate Address Detection is being performed
+ found = TRUE;
+ }
+ }
+ }
+
+ //The IPv6 address is not yet in the list?
+ if(!found)
+ {
+ //Loop through the list of IPv6 addresses
+ for(i = 1; i < IPV6_ADDR_LIST_SIZE; i++)
+ {
+ //Point to the current entry
+ entry = &interface->ipv6Context.addrList[i];
+
+ //Check the state of the IPv6 address
+ if(entry->state == IPV6_ADDR_STATE_INVALID)
+ {
+ //If an address is formed successfully and the address is not yet
+ //in the list, the host adds it to the list of addresses assigned
+ //to the interface, initializing its preferred and valid lifetime
+ //values from the Prefix Information option
+ if(interface->ndpContext.dupAddrDetectTransmits > 0)
+ {
+ //Use the IPv6 address as a tentative address
+ ipv6SetAddr(interface, i, &addr, IPV6_ADDR_STATE_TENTATIVE,
+ validLifetime, preferredLifetime, FALSE);
+ }
+ else
+ {
+ //The use of the IPv6 address is now unrestricted
+ ipv6SetAddr(interface, i, &addr, IPV6_ADDR_STATE_PREFERRED,
+ validLifetime, preferredLifetime, FALSE);
+ }
+
+ //A new IPv6 address has just been assigned to the interface
+ context->configUpdated = TRUE;
+ //We are done
+ break;
+ }
+ }
+ }
+}
+
+
+/**
+ * @brief Generate a link-local address
+ * @param[in] context Pointer to the SLAAC context
+ * @return Error code
+ **/
+
+error_t slaacGenerateLinkLocalAddr(SlaacContext *context)
+{
+ error_t error;
+ NetInterface *interface;
+ Ipv6Addr addr;
+
+ //Point to the underlying network interface
+ interface = context->settings.interface;
+
+ //Check whether a link-local address has been manually assigned
+ if(interface->ipv6Context.addrList[0].state != IPV6_ADDR_STATE_INVALID &&
+ interface->ipv6Context.addrList[0].permanent)
+ {
+ //Keep using the current link-local address
+ error = NO_ERROR;
+ }
+ else
+ {
+ //A link-local address is formed by combining the well-known
+ //link-local prefix fe80::/10 with the interface identifier
+ ipv6GenerateLinkLocalAddr(&interface->eui64, &addr);
+
+ //Check whether Duplicate Address Detection should be performed
+ if(interface->ndpContext.dupAddrDetectTransmits > 0)
+ {
+ //Use the link-local address as a tentative address
+ error = ipv6SetAddr(interface, 0, &addr, IPV6_ADDR_STATE_TENTATIVE,
+ NDP_INFINITE_LIFETIME, NDP_INFINITE_LIFETIME, FALSE);
+ }
+ else
+ {
+ //The use of the link-local address is now unrestricted
+ error = ipv6SetAddr(interface, 0, &addr, IPV6_ADDR_STATE_PREFERRED,
+ NDP_INFINITE_LIFETIME, NDP_INFINITE_LIFETIME, FALSE);
+ }
+ }
+
+ //Return status code
+ return error;
+}
+
+
+/**
+ * @brief Dump IPv6 configuration for debugging purpose
+ * @param[in] context Pointer to the SLAAC context
+ **/
+
+void slaacDumpConfig(SlaacContext *context)
+{
+#if (SLAAC_TRACE_LEVEL >= TRACE_LEVEL_INFO)
+ uint_t i;
+ NetInterface *interface;
+ Ipv6Context *ipv6Context;
+
+ //Point to the underlying network interface
+ interface = context->settings.interface;
+ //Point to the IPv6 context
+ ipv6Context = &interface->ipv6Context;
+
+ //Debug message
+ TRACE_INFO("\r\n");
+ TRACE_INFO("SLAAC configuration:\r\n");
+
+ //Link-local address
+ TRACE_INFO(" Link-local Address = %s\r\n",
+ ipv6AddrToString(&ipv6Context->addrList[0].addr, NULL));
+
+ //Global addresses
+ for(i = 1; i < IPV6_ADDR_LIST_SIZE; i++)
+ {
+ TRACE_INFO(" Global Address %u = %s\r\n", i,
+ ipv6AddrToString(&ipv6Context->addrList[i].addr, NULL));
+ }
+
+ //IPv6 prefixes
+ for(i = 0; i < IPV6_PREFIX_LIST_SIZE; i++)
+ {
+ TRACE_INFO(" Prefix %u = %s/%" PRIu8 "\r\n", i + 1,
+ ipv6AddrToString(&ipv6Context->prefixList[i].prefix, NULL),
+ ipv6Context->prefixList[i].prefixLength);
+ }
+
+ //Default routers
+ for(i = 0; i < IPV6_ROUTER_LIST_SIZE; i++)
+ {
+ TRACE_INFO(" Default Router %u = %s\r\n", i + 1,
+ ipv6AddrToString(&ipv6Context->routerList[i].addr, NULL));
+ }
+
+ //DNS servers
+ for(i = 0; i < IPV6_DNS_SERVER_LIST_SIZE; i++)
+ {
+ TRACE_INFO(" DNS Server %u = %s\r\n", i + 1,
+ ipv6AddrToString(&ipv6Context->dnsServerList[i], NULL));
+ }
+
+ //Maximum transmit unit
+ TRACE_INFO(" MTU = %" PRIuSIZE "\r\n", ipv6Context->linkMtu);
+ TRACE_INFO("\r\n");
+#endif
+}
+
+#endif
+