Diff: cyclone_tcp/drivers/xmc4700_eth.c

Revision:

0:8918a71cdbe9

diff -r 000000000000 -r 8918a71cdbe9 cyclone_tcp/drivers/xmc4700_eth.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/cyclone_tcp/drivers/xmc4700_eth.c	Sat Feb 04 18:15:49 2017 +0000
@@ -0,0 +1,762 @@
+/**
+ * @file xmc4700_eth.c
+ * @brief Infineon XMC4700 Ethernet MAC controller
+ *
+ * @section License
+ *
+ * Copyright (C) 2010-2017 Oryx Embedded SARL. All rights reserved.
+ *
+ * This file is part of CycloneTCP Open.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * @author Oryx Embedded SARL (www.oryx-embedded.com)
+ * @version 1.7.6
+ **/
+
+//Switch to the appropriate trace level
+#define TRACE_LEVEL NIC_TRACE_LEVEL
+
+//Dependencies
+#include "xmc4700.h"
+#include "core/net.h"
+#include "drivers/xmc4700_eth.h"
+#include "debug.h"
+
+//Underlying network interface
+static NetInterface *nicDriverInterface;
+
+//IAR EWARM compiler?
+#if defined(__ICCARM__)
+
+//Transmit buffer
+#pragma data_alignment = 4
+#pragma location = "ETH_RAM"
+static uint8_t txBuffer[XMC4700_ETH_TX_BUFFER_COUNT][XMC4700_ETH_TX_BUFFER_SIZE];
+//Receive buffer
+#pragma data_alignment = 4
+#pragma location = "ETH_RAM"
+static uint8_t rxBuffer[XMC4700_ETH_RX_BUFFER_COUNT][XMC4700_ETH_RX_BUFFER_SIZE];
+//Transmit DMA descriptors
+#pragma data_alignment = 4
+#pragma location = "ETH_RAM"
+static Xmc4700TxDmaDesc txDmaDesc[XMC4700_ETH_TX_BUFFER_COUNT];
+//Receive DMA descriptors
+#pragma data_alignment = 4
+#pragma location = "ETH_RAM"
+static Xmc4700RxDmaDesc rxDmaDesc[XMC4700_ETH_RX_BUFFER_COUNT];
+
+//Keil MDK-ARM or GCC compiler?
+#else
+
+//Transmit buffer
+static uint8_t txBuffer[XMC4700_ETH_TX_BUFFER_COUNT][XMC4700_ETH_TX_BUFFER_SIZE]
+   __attribute__((aligned(4), __section__("ETH_RAM")));
+//Receive buffer
+static uint8_t rxBuffer[XMC4700_ETH_RX_BUFFER_COUNT][XMC4700_ETH_RX_BUFFER_SIZE]
+   __attribute__((aligned(4), __section__("ETH_RAM")));
+//Transmit DMA descriptors
+static Xmc4700TxDmaDesc txDmaDesc[XMC4700_ETH_TX_BUFFER_COUNT]
+   __attribute__((aligned(4), __section__("ETH_RAM")));
+//Receive DMA descriptors
+static Xmc4700RxDmaDesc rxDmaDesc[XMC4700_ETH_RX_BUFFER_COUNT]
+   __attribute__((aligned(4), __section__("ETH_RAM")));
+
+#endif
+
+//Pointer to the current TX DMA descriptor
+static Xmc4700TxDmaDesc *txCurDmaDesc;
+//Pointer to the current RX DMA descriptor
+static Xmc4700RxDmaDesc *rxCurDmaDesc;
+
+
+/**
+ * @brief XMC4700 Ethernet MAC driver
+ **/
+
+const NicDriver xmc4700EthDriver =
+{
+   NIC_TYPE_ETHERNET,
+   ETH_MTU,
+   xmc4700EthInit,
+   xmc4700EthTick,
+   xmc4700EthEnableIrq,
+   xmc4700EthDisableIrq,
+   xmc4700EthEventHandler,
+   xmc4700EthSendPacket,
+   xmc4700EthSetMulticastFilter,
+   xmc4700EthUpdateMacConfig,
+   xmc4700EthWritePhyReg,
+   xmc4700EthReadPhyReg,
+   TRUE,
+   TRUE,
+   TRUE,
+   FALSE
+};
+
+
+/**
+ * @brief XMC4700 Ethernet MAC initialization
+ * @param[in] interface Underlying network interface
+ * @return Error code
+ **/
+
+error_t xmc4700EthInit(NetInterface *interface)
+{
+   error_t error;
+
+   //Debug message
+   TRACE_INFO("Initializing XMC4700 Ethernet MAC...\r\n");
+
+   //Save underlying network interface
+   nicDriverInterface = interface;
+
+   //Disable parity error trap
+   SCU_PARITY->PETE = 0;
+   //Disable unaligned access trap
+   PPB->CCR &= ~PPB_CCR_UNALIGN_TRP_Msk;
+
+   //Enable ETH0 peripheral clock
+   SCU_CLK->CLKSET = SCU_CLK_CLKSET_ETH0CEN_Msk;
+
+   //GPIO configuration
+   xmc4700EthInitGpio(interface);
+
+   //Reset ETH0 peripheral
+   SCU_RESET->PRSET2 = SCU_RESET_PRSET2_ETH0RS_Msk;
+   SCU_RESET->PRCLR2 = SCU_RESET_PRCLR2_ETH0RS_Msk;
+
+   //Reset DMA controller
+   ETH0->BUS_MODE |= ETH_BUS_MODE_SWR_Msk;
+   //Wait for the reset to complete
+   while(ETH0->BUS_MODE & ETH_BUS_MODE_SWR_Msk);
+
+   //Adjust MDC clock range depending on ETH clock frequency
+   ETH0->GMII_ADDRESS = ETH_GMII_ADDRESS_CR_DIV62;
+
+   //PHY transceiver initialization
+   error = interface->phyDriver->init(interface);
+   //Failed to initialize PHY transceiver?
+   if(error)
+      return error;
+
+   //Use default MAC configuration
+   ETH0->MAC_CONFIGURATION = ETH_MAC_CONFIGURATION_RESERVED15_Msk |
+      ETH_MAC_CONFIGURATION_DO_Msk;
+
+   //Set the MAC address
+   ETH0->MAC_ADDRESS0_LOW = interface->macAddr.w[0] | (interface->macAddr.w[1] << 16);
+   ETH0->MAC_ADDRESS0_HIGH = interface->macAddr.w[2];
+
+   //Initialize hash table
+   ETH0->HASH_TABLE_LOW = 0;
+   ETH0->HASH_TABLE_HIGH = 0;
+
+   //Configure the receive filter
+   ETH0->MAC_FRAME_FILTER = ETH_MAC_FRAME_FILTER_HPF_Msk | ETH_MAC_FRAME_FILTER_HMC_Msk;
+   //Disable flow control
+   ETH0->FLOW_CONTROL = 0;
+   //Enable store and forward mode
+   ETH0->OPERATION_MODE = ETH_OPERATION_MODE_RSF_Msk | ETH_OPERATION_MODE_TSF_Msk;
+
+   //Configure DMA bus mode
+   ETH0->BUS_MODE = ETH_BUS_MODE_AAL_Msk | ETH_BUS_MODE_USP_Msk |
+      ETH_BUS_MODE_RPBL_1 | ETH_BUS_MODE_PR_1_1 | ETH_BUS_MODE_PBL_1;
+
+   //Initialize DMA descriptor lists
+   xmc4700EthInitDmaDesc(interface);
+
+   //Prevent interrupts from being generated when statistic counters reach
+   //half their maximum value
+   ETH0->MMC_TRANSMIT_INTERRUPT_MASK = 0xFFFFFFFF;
+   ETH0->MMC_RECEIVE_INTERRUPT_MASK = 0xFFFFFFFF;
+   ETH0->MMC_IPC_RECEIVE_INTERRUPT_MASK = 0xFFFFFFFF;
+
+   //Disable MAC interrupts
+   ETH0->INTERRUPT_MASK = ETH_INTERRUPT_MASK_TSIM_Msk | ETH_INTERRUPT_MASK_PMTIM_Msk;
+
+   //Enable the desired DMA interrupts
+   ETH0->INTERRUPT_ENABLE = ETH_INTERRUPT_ENABLE_NIE_Msk |
+      ETH_INTERRUPT_ENABLE_RIE_Msk | ETH_INTERRUPT_ENABLE_TIE_Msk;
+
+   //Set priority grouping (6 bits for pre-emption priority, no bits for subpriority)
+   NVIC_SetPriorityGrouping(XMC4700_ETH_IRQ_PRIORITY_GROUPING);
+
+   //Configure Ethernet interrupt priority
+   NVIC_SetPriority(ETH0_0_IRQn, NVIC_EncodePriority(XMC4700_ETH_IRQ_PRIORITY_GROUPING,
+      XMC4700_ETH_IRQ_GROUP_PRIORITY, XMC4700_ETH_IRQ_SUB_PRIORITY));
+
+   //Enable MAC transmission and reception
+   ETH0->MAC_CONFIGURATION |= ETH_MAC_CONFIGURATION_TE_Msk | ETH_MAC_CONFIGURATION_RE_Msk;
+   //Enable DMA transmission and reception
+   ETH0->OPERATION_MODE |= ETH_OPERATION_MODE_ST_Msk | ETH_OPERATION_MODE_SR_Msk;
+
+   //Accept any packets from the upper layer
+   osSetEvent(&interface->nicTxEvent);
+
+   //Successful initialization
+   return NO_ERROR;
+}
+
+
+//XMC4700 Relax Kit?
+#if defined(USE_XMC4700_RELAX_KIT)
+
+/**
+ * @brief GPIO configuration
+ * @param[in] interface Underlying network interface
+ **/
+
+void xmc4700EthInitGpio(NetInterface *interface)
+{
+   uint32_t temp;
+
+   //Configure ETH0.MDIO (P2.0), ETH0.RXD0A (P2.2) and ETH0.RXD1A (P2.3)
+   temp = PORT2->IOCR0;
+   temp &= ~(PORT2_IOCR0_PC0_Msk | PORT2_IOCR0_PC2_Msk | PORT2_IOCR0_PC3_Msk);
+   temp |= (0UL << PORT2_IOCR0_PC0_Pos) | (0UL << PORT2_IOCR0_PC2_Pos) | (0UL << PORT2_IOCR0_PC3_Pos);
+   PORT2->IOCR0 = temp;
+
+   //Configure ETH0.RXERA (P2.4), ETH0.TX_EN (P2.5) and ETH0.MDC (P2.7)
+   temp = PORT2->IOCR4;
+   temp &= ~(PORT2_IOCR4_PC4_Msk | PORT2_IOCR4_PC5_Msk | PORT2_IOCR4_PC7_Msk);
+   temp |= (0UL << PORT2_IOCR4_PC4_Pos) | (17UL << PORT2_IOCR4_PC5_Pos) | (17UL << PORT2_IOCR4_PC7_Pos);
+   PORT2->IOCR4 = temp;
+
+   //Configure ETH0.TXD0 (P2.8) and ETH0.TXD1 (P2.9)
+   temp = PORT2->IOCR8;
+   temp &= ~(PORT2_IOCR8_PC8_Msk | PORT2_IOCR8_PC9_Msk);
+   temp |= (17UL << PORT2_IOCR8_PC8_Pos) | (17UL << PORT2_IOCR8_PC9_Pos);
+   PORT2->IOCR8 = temp;
+
+   //Configure ETH0.CLK_RMIIC (P15.8) and ETH0.CRS_DVC (P15.9)
+   temp = PORT15->IOCR8;
+   temp &= ~(PORT15_IOCR8_PC8_Msk | PORT15_IOCR8_PC9_Msk);
+   temp |= (0UL << PORT15_IOCR8_PC8_Pos) | (0UL << PORT15_IOCR8_PC9_Pos);
+   PORT15->IOCR8 = temp;
+
+   //Assign ETH_MDIO (P2.0) to HW0
+   temp = PORT2->HWSEL & ~PORT2_HWSEL_HW0_Msk;
+   PORT2->HWSEL = temp | (1UL << PORT2_HWSEL_HW0_Pos);
+
+   //Select output driver strength for ETH0.TX_EN (P2.5)
+   temp = PORT2->PDR0;
+   temp &= ~PORT2_PDR0_PD5_Msk;
+   temp |= (0UL << PORT2_PDR0_PD5_Pos);
+   PORT2->PDR0 = temp;
+
+   //Select output driver strength for ETH0.TXD0 (P2.8) and ETH0.TXD1 (P2.9)
+   temp = PORT2->PDR1;
+   temp &= ~(PORT2_PDR1_PD8_Msk | PORT2_PDR1_PD9_Msk);
+   temp |= (0UL << PORT2_PDR1_PD8_Pos) | (0UL << PORT2_PDR1_PD9_Pos);
+   PORT2->PDR1 = temp;
+
+   //Use ETH0.CLK_RMIIC (P15.8) and ETH0.CRS_DVC (P15.9) as digital inputs
+   PORT15->PDISC &= ~(PORT15_PDISC_PDIS8_Msk | PORT15_PDISC_PDIS9_Msk);
+
+   //Select RMII operation mode
+   ETH0_CON->CON = ETH_CON_INFSEL_Msk | ETH_CON_MDIO_B | ETH_CON_RXER_A |
+      ETH_CON_CRS_DV_C | ETH_CON_CLK_RMII_C | ETH_CON_RXD1_A | ETH_CON_RXD0_A;
+}
+
+#endif
+
+
+/**
+ * @brief Initialize DMA descriptor lists
+ * @param[in] interface Underlying network interface
+ **/
+
+void xmc4700EthInitDmaDesc(NetInterface *interface)
+{
+   uint_t i;
+
+   //Initialize TX DMA descriptor list
+   for(i = 0; i < XMC4700_ETH_TX_BUFFER_COUNT; i++)
+   {
+      //Use chain structure rather than ring structure
+      txDmaDesc[i].tdes0 = ETH_TDES0_IC | ETH_TDES0_TCH;
+      //Initialize transmit buffer size
+      txDmaDesc[i].tdes1 = 0;
+      //Transmit buffer address
+      txDmaDesc[i].tdes2 = (uint32_t) txBuffer[i];
+      //Next descriptor address
+      txDmaDesc[i].tdes3 = (uint32_t) &txDmaDesc[i + 1];
+   }
+
+   //The last descriptor is chained to the first entry
+   txDmaDesc[i - 1].tdes3 = (uint32_t) &txDmaDesc[0];
+   //Point to the very first descriptor
+   txCurDmaDesc = &txDmaDesc[0];
+
+   //Initialize RX DMA descriptor list
+   for(i = 0; i < XMC4700_ETH_RX_BUFFER_COUNT; i++)
+   {
+      //The descriptor is initially owned by the DMA
+      rxDmaDesc[i].rdes0 = ETH_RDES0_OWN;
+      //Use chain structure rather than ring structure
+      rxDmaDesc[i].rdes1 = ETH_RDES1_RCH | (XMC4700_ETH_RX_BUFFER_SIZE & ETH_RDES1_RBS1);
+      //Receive buffer address
+      rxDmaDesc[i].rdes2 = (uint32_t) rxBuffer[i];
+      //Next descriptor address
+      rxDmaDesc[i].rdes3 = (uint32_t) &rxDmaDesc[i + 1];
+   }
+
+   //The last descriptor is chained to the first entry
+   rxDmaDesc[i - 1].rdes3 = (uint32_t) &rxDmaDesc[0];
+   //Point to the very first descriptor
+   rxCurDmaDesc = &rxDmaDesc[0];
+
+   //Start location of the TX descriptor list
+   ETH0->TRANSMIT_DESCRIPTOR_LIST_ADDRESS = (uint32_t) txDmaDesc;
+   //Start location of the RX descriptor list
+   ETH0->RECEIVE_DESCRIPTOR_LIST_ADDRESS = (uint32_t) rxDmaDesc;
+}
+
+
+/**
+ * @brief XMC4700 Ethernet MAC timer handler
+ *
+ * This routine is periodically called by the TCP/IP stack to
+ * handle periodic operations such as polling the link state
+ *
+ * @param[in] interface Underlying network interface
+ **/
+
+void xmc4700EthTick(NetInterface *interface)
+{
+   //Handle periodic operations
+   interface->phyDriver->tick(interface);
+}
+
+
+/**
+ * @brief Enable interrupts
+ * @param[in] interface Underlying network interface
+ **/
+
+void xmc4700EthEnableIrq(NetInterface *interface)
+{
+   //Enable Ethernet MAC interrupts
+   NVIC_EnableIRQ(ETH0_0_IRQn);
+   //Enable Ethernet PHY interrupts
+   interface->phyDriver->enableIrq(interface);
+}
+
+
+/**
+ * @brief Disable interrupts
+ * @param[in] interface Underlying network interface
+ **/
+
+void xmc4700EthDisableIrq(NetInterface *interface)
+{
+   //Disable Ethernet MAC interrupts
+   NVIC_DisableIRQ(ETH0_0_IRQn);
+   //Disable Ethernet PHY interrupts
+   interface->phyDriver->disableIrq(interface);
+}
+
+
+/**
+ * @brief XMC4700 Ethernet MAC interrupt service routine
+ **/
+
+void ETH0_0_IRQHandler(void)
+{
+   bool_t flag;
+   uint32_t status;
+
+   //Enter interrupt service routine
+   osEnterIsr();
+
+   //This flag will be set if a higher priority task must be woken
+   flag = FALSE;
+
+   //Read DMA status register
+   status = ETH0->STATUS;
+
+   //A packet has been transmitted?
+   if(status & ETH_STATUS_TI_Msk)
+   {
+      //Clear TI interrupt flag
+      ETH0->STATUS = ETH_STATUS_TI_Msk;
+
+      //Check whether the TX buffer is available for writing
+      if(!(txCurDmaDesc->tdes0 & ETH_TDES0_OWN))
+      {
+         //Notify the TCP/IP stack that the transmitter is ready to send
+         flag |= osSetEventFromIsr(&nicDriverInterface->nicTxEvent);
+      }
+   }
+
+   //A packet has been received?
+   if(status & ETH_STATUS_RI_Msk)
+   {
+      //Disable RIE interrupt
+      ETH0->INTERRUPT_ENABLE &= ~ETH_INTERRUPT_ENABLE_RIE_Msk;
+
+      //Set event flag
+      nicDriverInterface->nicEvent = TRUE;
+      //Notify the TCP/IP stack of the event
+      flag |= osSetEventFromIsr(&netEvent);
+   }
+
+   //Clear NIS interrupt flag
+   ETH0->STATUS = ETH_STATUS_NIS_Msk;
+
+   //Leave interrupt service routine
+   osExitIsr(flag);
+}
+
+
+/**
+ * @brief XMC4700 Ethernet MAC event handler
+ * @param[in] interface Underlying network interface
+ **/
+
+void xmc4700EthEventHandler(NetInterface *interface)
+{
+   error_t error;
+
+   //Packet received?
+   if(ETH0->STATUS & ETH_STATUS_RI_Msk)
+   {
+      //Clear interrupt flag
+      ETH0->STATUS = ETH_STATUS_RI_Msk;
+
+      //Process all pending packets
+      do
+      {
+         //Read incoming packet
+         error = xmc4700EthReceivePacket(interface);
+
+         //No more data in the receive buffer?
+      } while(error != ERROR_BUFFER_EMPTY);
+   }
+
+   //Re-enable DMA interrupts
+   ETH0->INTERRUPT_ENABLE |= ETH_INTERRUPT_ENABLE_NIE_Msk |
+      ETH_INTERRUPT_ENABLE_RIE_Msk | ETH_INTERRUPT_ENABLE_TIE_Msk;
+}
+
+
+/**
+ * @brief Send a packet
+ * @param[in] interface Underlying network interface
+ * @param[in] buffer Multi-part buffer containing the data to send
+ * @param[in] offset Offset to the first data byte
+ * @return Error code
+ **/
+
+error_t xmc4700EthSendPacket(NetInterface *interface,
+   const NetBuffer *buffer, size_t offset)
+{
+   size_t length;
+
+   //Retrieve the length of the packet
+   length = netBufferGetLength(buffer) - offset;
+
+   //Check the frame length
+   if(length > XMC4700_ETH_TX_BUFFER_SIZE)
+   {
+      //The transmitter can accept another packet
+      osSetEvent(&interface->nicTxEvent);
+      //Report an error
+      return ERROR_INVALID_LENGTH;
+   }
+
+   //Make sure the current buffer is available for writing
+   if(txCurDmaDesc->tdes0 & ETH_TDES0_OWN)
+      return ERROR_FAILURE;
+
+   //Copy user data to the transmit buffer
+   netBufferRead((uint8_t *) txCurDmaDesc->tdes2, buffer, offset, length);
+
+   //Write the number of bytes to send
+   txCurDmaDesc->tdes1 = length & ETH_TDES1_TBS1;
+   //Set LS and FS flags as the data fits in a single buffer
+   txCurDmaDesc->tdes0 |= ETH_TDES0_LS | ETH_TDES0_FS;
+   //Give the ownership of the descriptor to the DMA
+   txCurDmaDesc->tdes0 |= ETH_TDES0_OWN;
+
+   //Clear TU flag to resume processing
+   ETH0->STATUS = ETH_STATUS_TU_Msk;
+   //Instruct the DMA to poll the transmit descriptor list
+   ETH0->TRANSMIT_POLL_DEMAND = 0;
+
+   //Point to the next descriptor in the list
+   txCurDmaDesc = (Xmc4700TxDmaDesc *) txCurDmaDesc->tdes3;
+
+   //Check whether the next buffer is available for writing
+   if(!(txCurDmaDesc->tdes0 & ETH_TDES0_OWN))
+   {
+      //The transmitter can accept another packet
+      osSetEvent(&interface->nicTxEvent);
+   }
+
+   //Data successfully written
+   return NO_ERROR;
+}
+
+
+/**
+ * @brief Receive a packet
+ * @param[in] interface Underlying network interface
+ * @return Error code
+ **/
+
+error_t xmc4700EthReceivePacket(NetInterface *interface)
+{
+   error_t error;
+   size_t n;
+
+   //The current buffer is available for reading?
+   if(!(rxCurDmaDesc->rdes0 & ETH_RDES0_OWN))
+   {
+      //FS and LS flags should be set
+      if((rxCurDmaDesc->rdes0 & ETH_RDES0_FS) && (rxCurDmaDesc->rdes0 & ETH_RDES0_LS))
+      {
+         //Make sure no error occurred
+         if(!(rxCurDmaDesc->rdes0 & ETH_RDES0_ES))
+         {
+            //Retrieve the length of the frame
+            n = (rxCurDmaDesc->rdes0 & ETH_RDES0_FL) >> 16;
+            //Limit the number of data to read
+            n = MIN(n, XMC4700_ETH_RX_BUFFER_SIZE);
+
+            //Pass the packet to the upper layer
+            nicProcessPacket(interface, (uint8_t *) rxCurDmaDesc->rdes2, n);
+
+            //Valid packet received
+            error = NO_ERROR;
+         }
+         else
+         {
+            //The received packet contains an error
+            error = ERROR_INVALID_PACKET;
+         }
+      }
+      else
+      {
+         //The packet is not valid
+         error = ERROR_INVALID_PACKET;
+      }
+
+      //Give the ownership of the descriptor back to the DMA
+      rxCurDmaDesc->rdes0 = ETH_RDES0_OWN;
+      //Point to the next descriptor in the list
+      rxCurDmaDesc = (Xmc4700RxDmaDesc *) rxCurDmaDesc->rdes3;
+   }
+   else
+   {
+      //No more data in the receive buffer
+      error = ERROR_BUFFER_EMPTY;
+   }
+
+   //Clear RU flag to resume processing
+   ETH0->STATUS = ETH_STATUS_RU_Msk;
+   //Instruct the DMA to poll the receive descriptor list
+   ETH0->RECEIVE_POLL_DEMAND = 0;
+
+   //Return status code
+   return error;
+}
+
+
+/**
+ * @brief Configure multicast MAC address filtering
+ * @param[in] interface Underlying network interface
+ * @return Error code
+ **/
+
+error_t xmc4700EthSetMulticastFilter(NetInterface *interface)
+{
+   uint_t i;
+   uint_t k;
+   uint32_t crc;
+   uint32_t hashTable[2];
+   MacFilterEntry *entry;
+
+   //Debug message
+   TRACE_DEBUG("Updating XMC4700 hash table...\r\n");
+
+   //Clear hash table
+   hashTable[0] = 0;
+   hashTable[1] = 0;
+
+   //The MAC filter table contains the multicast MAC addresses
+   //to accept when receiving an Ethernet frame
+   for(i = 0; i < MAC_MULTICAST_FILTER_SIZE; i++)
+   {
+      //Point to the current entry
+      entry = &interface->macMulticastFilter[i];
+
+      //Valid entry?
+      if(entry->refCount > 0)
+      {
+         //Compute CRC over the current MAC address
+         crc = xmc4700EthCalcCrc(&entry->addr, sizeof(MacAddr));
+
+         //The upper 6 bits in the CRC register are used to index the
+         //contents of the hash table
+         k = (crc >> 26) & 0x3F;
+
+         //Update hash table contents
+         hashTable[k / 32] |= (1 << (k % 32));
+      }
+   }
+
+   //Write the hash table
+   ETH0->HASH_TABLE_LOW = hashTable[0];
+   ETH0->HASH_TABLE_HIGH = hashTable[1];
+
+   //Debug message
+   TRACE_DEBUG("  HTL = %08" PRIX32 "\r\n", ETH0->HASH_TABLE_LOW);
+   TRACE_DEBUG("  HTH = %08" PRIX32 "\r\n", ETH0->HASH_TABLE_HIGH);
+
+   //Successful processing
+   return NO_ERROR;
+}
+
+
+/**
+ * @brief Adjust MAC configuration parameters for proper operation
+ * @param[in] interface Underlying network interface
+ * @return Error code
+ **/
+
+error_t xmc4700EthUpdateMacConfig(NetInterface *interface)
+{
+   uint32_t config;
+
+   //Read current MAC configuration
+   config = ETH0->MAC_CONFIGURATION;
+
+   //10BASE-T or 100BASE-TX operation mode?
+   if(interface->linkSpeed == NIC_LINK_SPEED_100MBPS)
+      config |= ETH_MAC_CONFIGURATION_FES_Msk;
+   else
+      config &= ~ETH_MAC_CONFIGURATION_FES_Msk;
+
+   //Half-duplex or full-duplex mode?
+   if(interface->duplexMode == NIC_FULL_DUPLEX_MODE)
+      config |= ETH_MAC_CONFIGURATION_DM_Msk;
+   else
+      config &= ~ETH_MAC_CONFIGURATION_DM_Msk;
+
+   //Update MAC configuration register
+   ETH0->MAC_CONFIGURATION = config;
+
+   //Successful processing
+   return NO_ERROR;
+}
+
+
+/**
+ * @brief Write PHY register
+ * @param[in] phyAddr PHY address
+ * @param[in] regAddr Register address
+ * @param[in] data Register value
+ **/
+
+void xmc4700EthWritePhyReg(uint8_t phyAddr, uint8_t regAddr, uint16_t data)
+{
+   uint32_t value;
+
+   //Take care not to alter MDC clock configuration
+   value = ETH0->GMII_ADDRESS & ETH_GMII_ADDRESS_CR_Msk;
+   //Set up a write operation
+   value |= ETH_GMII_ADDRESS_MW_Msk | ETH_GMII_ADDRESS_MB_Msk;
+   //PHY address
+   value |= (phyAddr << ETH_GMII_ADDRESS_PA_Pos) & ETH_GMII_ADDRESS_PA_Msk;
+   //Register address
+   value |= (regAddr << ETH_GMII_ADDRESS_MR_Pos) & ETH_GMII_ADDRESS_MR_Msk;
+
+   //Data to be written in the PHY register
+   ETH0->GMII_DATA = data & ETH_GMII_DATA_MD_Msk;
+
+   //Start a write operation
+   ETH0->GMII_ADDRESS = value;
+   //Wait for the write to complete
+   while(ETH0->GMII_ADDRESS & ETH_GMII_ADDRESS_MB_Msk);
+}
+
+
+/**
+ * @brief Read PHY register
+ * @param[in] phyAddr PHY address
+ * @param[in] regAddr Register address
+ * @return Register value
+ **/
+
+uint16_t xmc4700EthReadPhyReg(uint8_t phyAddr, uint8_t regAddr)
+{
+   uint32_t value;
+
+   //Take care not to alter MDC clock configuration
+   value = ETH0->GMII_ADDRESS & ETH_GMII_ADDRESS_CR_Msk;
+   //Set up a read operation
+   value |= ETH_GMII_ADDRESS_MB_Msk;
+   //PHY address
+   value |= (phyAddr << ETH_GMII_ADDRESS_PA_Pos) & ETH_GMII_ADDRESS_PA_Msk;
+   //Register address
+   value |= (regAddr << ETH_GMII_ADDRESS_MR_Pos) & ETH_GMII_ADDRESS_MR_Msk;
+
+   //Start a read operation
+   ETH0->GMII_ADDRESS = value;
+   //Wait for the read to complete
+   while(ETH0->GMII_ADDRESS & ETH_GMII_ADDRESS_MB_Msk);
+
+   //Return PHY register contents
+   return ETH0->GMII_DATA & ETH_GMII_DATA_MD_Msk;
+}
+
+
+/**
+ * @brief CRC calculation
+ * @param[in] data Pointer to the data over which to calculate the CRC
+ * @param[in] length Number of bytes to process
+ * @return Resulting CRC value
+ **/
+
+uint32_t xmc4700EthCalcCrc(const void *data, size_t length)
+{
+   uint_t i;
+   uint_t j;
+
+   //Point to the data over which to calculate the CRC
+   const uint8_t *p = (uint8_t *) data;
+   //CRC preset value
+   uint32_t crc = 0xFFFFFFFF;
+
+   //Loop through data
+   for(i = 0; i < length; i++)
+   {
+      //The message is processed bit by bit
+      for(j = 0; j < 8; j++)
+      {
+         //Update CRC value
+         if(((crc >> 31) ^ (p[i] >> j)) & 0x01)
+            crc = (crc << 1) ^ 0x04C11DB7;
+         else
+            crc = crc << 1;
+      }
+   }
+
+   //Return CRC value
+   return ~crc;
+}
+