Sergey Pastor
Webserver+3d print
cyclone_tcp/drivers/st802rt1a.h
- Committer:
- Sergunb
- Date:
- 2017-02-04
- Revision:
- 0:8918a71cdbe9
File content as of revision 0:8918a71cdbe9:
/**
* @file st802rt1a.h
* @brief ST802RT1A Ethernet PHY transceiver
*
* @section License
*
* Copyright (C) 2010-2017 Oryx Embedded SARL. All rights reserved.
*
* This file is part of CycloneTCP Open.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
* @author Oryx Embedded SARL (www.oryx-embedded.com)
* @version 1.7.6
**/
#ifndef _ST802RT1A_H
#define _ST802RT1A_H
//Dependencies
#include "core/nic.h"
//PHY address
#define ST802RT1A_PHY_ADDR 1
//ST802RT1A registers
#define ST802RT1A_PHY_REG_RN00 0x00
#define ST802RT1A_PHY_REG_RN01 0x01
#define ST802RT1A_PHY_REG_RN02 0x02
#define ST802RT1A_PHY_REG_RN03 0x03
#define ST802RT1A_PHY_REG_RN04 0x04
#define ST802RT1A_PHY_REG_RN05 0x05
#define ST802RT1A_PHY_REG_RN06 0x06
#define ST802RT1A_PHY_REG_RN07 0x07
#define ST802RT1A_PHY_REG_RN08 0x08
#define ST802RT1A_PHY_REG_RN10 0x10
#define ST802RT1A_PHY_REG_RN11 0x11
#define ST802RT1A_PHY_REG_RN12 0x12
#define ST802RT1A_PHY_REG_RN13 0x13
#define ST802RT1A_PHY_REG_RN14 0x14
#define ST802RT1A_PHY_REG_RN18 0x18
#define ST802RT1A_PHY_REG_RN19 0x19
#define ST802RT1A_PHY_REG_RN1B 0x1B
#define ST802RT1A_PHY_REG_RN1C 0x1C
#define ST802RT1A_PHY_REG_RN1E 0x1E
#define ST802RT1A_PHY_REG_RN1F 0x1F
#define ST802RT1A_PHY_REG_RS1B 0x1B
//RN00 register
#define RN00_SOFT_RESET (1 << 15)
#define RN00_LOCAL_LOOPBACK (1 << 14)
#define RN00_SPEED_SEL (1 << 13)
#define RN00_AN_EN (1 << 12)
#define RN00_POWER_DOWN (1 << 11)
#define RN00_ISOLATE (1 << 10)
#define RN00_RESTART_AN (1 << 9)
#define RN00_DUPLEX_MODE (1 << 8)
#define RN00_COL_TEST (1 << 7)
//RN01 register
#define RN01_100BT4 (1 << 15)
#define RN01_100BTX_FD (1 << 14)
#define RN01_100BTX (1 << 13)
#define RN01_10BT_FD (1 << 12)
#define RN01_10BT (1 << 11)
#define RN01_NO_PREAMBLE (1 << 6)
#define RN01_AN_COMPLETE (1 << 5)
#define RN01_REMOTE_FAULT (1 << 4)
#define RN01_AN_ABLE (1 << 3)
#define RN01_LINK_STATUS (1 << 2)
#define RN01_JABBER_DETECT (1 << 1)
#define RN01_EXTENDED_CAP (1 << 0)
//RN04 register
#define RN04_NP (1 << 15)
#define RN04_RF (1 << 13)
#define RN04_ASYM_PAUSE (1 << 11)
#define RN04_PAUSE (1 << 10)
#define RN04_100BT4 (1 << 9)
#define RN04_100BTX_FD (1 << 8)
#define RN04100BTX (1 << 7)
#define RN04_10BT_FD (1 << 6)
#define RN04_10BT (1 << 5)
#define RN04_SELECTOR4 (1 << 4)
#define RN04_SELECTOR3 (1 << 3)
#define RN04_SELECTOR2 (1 << 2)
#define RN04_SELECTOR1 (1 << 1)
#define RN04_SELECTOR0 (1 << 0)
//RN05 register
#define RN05_NP (1 << 15)
#define RN05_ACK (1 << 14)
#define RN05_RF (1 << 13)
#define RN05_ASYM_PAUSE (1 << 11)
#define RN05_PAUSE (1 << 10)
#define RN05_100BT4 (1 << 9)
#define RN05_100BTX_FD (1 << 8)
#define RN05_100BTX (1 << 7)
#define RN05_10BT_FD (1 << 6)
#define RN05_10BT (1 << 5)
#define RN05_SELECTOR4 (1 << 4)
#define RN05_SELECTOR3 (1 << 3)
#define RN05_SELECTOR2 (1 << 2)
#define RN05_SELECTOR1 (1 << 1)
#define RN05_SELECTOR0 (1 << 0)
//RN06 register
#define RN06_PD_FAULT (1 << 4)
#define RN06_LP_NP_ABLE (1 << 3)
#define RN06_NP_ABLE (1 << 2)
#define RN06_PAGE_RCVD (1 << 1)
#define RN06_LP_AN_ABLE (1 << 0)
//RN07 register
#define RN07_NP (1 << 15)
#define RN07_MP (1 << 13)
#define RN07_ACK2 (1 << 12)
#define RN07_TOGGLE (1 << 11)
#define RN07_CODE10 (1 << 10)
#define RN07_CODE9 (1 << 9)
#define RN07_CODE8 (1 << 8)
#define RN07_CODE7 (1 << 7)
#define RN07_CODE6 (1 << 6)
#define RN07_CODE5 (1 << 5)
#define RN07_CODE4 (1 << 4)
#define RN07_CODE3 (1 << 3)
#define RN07_CODE2 (1 << 2)
#define RN07_CODE1 (1 << 1)
#define RN07_CODE0 (1 << 0)
//RN08 register
#define RN08_NP (1 << 15)
#define RN08_ACK (1 << 14)
#define RN08_MP (1 << 13)
#define RN08_ACK2 (1 << 12)
#define RN08_TOGGLE (1 << 11)
#define RN08_CODE10 (1 << 10)
#define RN08_CODE9 (1 << 9)
#define RN08_CODE8 (1 << 8)
#define RN08_CODE7 (1 << 7)
#define RN08_CODE6 (1 << 6)
#define RN08_CODE5 (1 << 5)
#define RN08_CODE4 (1 << 4)
#define RN08_CODE3 (1 << 3)
#define RN08_CODE2 (1 << 2)
#define RN08_CODE1 (1 << 1)
#define RN08_CODE0 (1 << 0)
//RN10 register
#define RN10_MII_EN (1 << 9)
#define RN10_FEF_EN (1 << 5)
#define RN10_FIFO_EXT (1 << 2)
#define RN10_RMII_OOBS (1 << 1)
//RN11 register
#define RN11_FX_MODE (1 << 10)
#define RN11_SPEED (1 << 9)
#define RN11_DUPLEX (1 << 8)
#define RN11_PAUSE (1 << 7)
#define RN11_AN_COMPLETE_INT (1 << 6)
#define RN11_REMOTE_FAULT_INT (1 << 5)
#define RN11_LINK_DOWN_INT (1 << 4)
#define RN11_AN_LCW_RCVD_INT (1 << 3)
#define RN11_PD_FAULT_INT (1 << 2)
#define RN11_PG_RCVD_INT (1 << 1)
#define RN11_RX_FUL_INT (1 << 0)
//RN12 register
#define RN12_INT_OE_N (1 << 8)
#define RN12_INT_EN (1 << 7)
#define RN12_AN_COMPLETE_EN (1 << 6)
#define RN12_REMOTE_FAULT_EN (1 << 5)
#define RN12_LINK_DOWN_EN (1 << 4)
#define RN12_AN_LCW_RCVD_EN (1 << 3)
#define RN12_PD_FAULT_EN (1 << 2)
#define RN12_PG_RCVD_EN (1 << 1)
#define RN12_RX_FULL_EN (1 << 0)
//RN13 register
#define RN13_RX_ERR_COUNTER_DIS (1 << 13)
#define RN13_AN_COMPLETE (1 << 12)
#define RN13_DC_REST_EN (1 << 8)
#define RN13_NRZ_CONV_EN (1 << 7)
#define RN13_TX_ISOLATE (1 << 5)
#define RN13_CMODE2 (1 << 4)
#define RN13_CMODE1 (1 << 3)
#define RN13_CMODE0 (1 << 2)
#define RN13_MLT3_DIS (1 << 1)
#define RN13_SCRAMBLER_DIS (1 << 0)
#define RN13_CMODE_MASK (7 << 2)
#define RN13_CMODE_AN (0 << 2)
#define RN13_CMODE_10BT (1 << 2)
#define RN13_CMODE_100BTX (2 << 2)
#define RN13_CMODE_10BT_FD (5 << 2)
#define RN13_CMODE_100BTX_FD (6 << 2)
#define RN13_CMODE_TX_ISOLATE (7 << 2)
//RN14 register
#define RN14_PHY_ADDR4 (1 << 7)
#define RN14_PHY_ADDR3 (1 << 6)
#define RN14_PHY_ADDR2 (1 << 5)
#define RN14_PHY_ADDR1 (1 << 4)
#define RN14_PHY_ADDR0 (1 << 3)
#define RN14_NO_PREAMBLE (1 << 1)
//RN18 register
#define RN18_JABBER_DIS (1 << 15)
#define RN18_MDIO_PS (1 << 4)
//RN19 register
#define RN19_AN_COMPLETE (1 << 15)
#define RN19_AN_ACK (1 << 14)
#define RN19_AN_DETECT (1 << 13)
#define RN19_LP_AN_ABLE_DETECT (1 << 12)
#define RN19_AN_PAUSE (1 << 11)
#define RN19_AN_HCD2 (1 << 10)
#define RN19_AN_HCD1 (1 << 9)
#define RN19_AN_HCD0 (1 << 8)
#define RN19_PD_FAULT (1 << 7)
#define RN19_REMOTE_FAULT (1 << 6)
#define RN19_PAGE_RCVD (1 << 5)
#define RN19_LP_AN_ABLE (1 << 4)
#define RN19_SP100 (1 << 3)
#define RN19_LINK_STATUS (1 << 2)
#define RN19_AN_EN (1 << 1)
#define RN19_JABBER_DETECT (1 << 0)
//RN1B register
#define RN1B_LED_MODE (1 << 9)
#define RN1B_10BT_ECHO_DIS (1 << 7)
#define RN1B_MI_SQE_DIS (1 << 3)
//RN1C register
#define RN1C_MDIX_STATUS (1 << 13)
#define RN1C_MDIX_SWAP (1 << 12)
#define RN1C_MDIX_DIS (1 << 11)
#define RN1C_JABBER_DETECT (1 << 9)
#define RN1C_POLARITY_CHANGED (1 << 8)
//RN1E
#define RN1E_HCD_100BTX_FD (1 << 15)
#define RN1E_HCD_100BT4 (1 << 14)
#define RN1E_HCD_100BTX (1 << 13)
#define RN1E_HCD_10BT_FD (1 << 12)
#define RN1E_HCD_10BT (1 << 11)
#define RN1E_AN_RESTART (1 << 8)
#define RN1E_AN_COMPLETE (1 << 7)
#define RN1E_AN_ACK_COMPLETE (1 << 6)
#define RN1E_AN_ACK (1 << 5)
#define RN1E_AN_ABLE (1 << 4)
#define RN1E_SUPER_ISOLATE (1 << 3)
//RN1F register
#define RN1F_SHADOW_REG_EN (1 << 7)
//RS1B
#define RS1B_MLT3_DETECT (1 << 15)
#define RS1B_TX_CABLE_LEN2 (1 << 14)
#define RS1B_TX_CABLE_LEN1 (1 << 13)
#define RS1B_TX_CABLE_LEN0 (1 << 12)
#define RS1B_LED_TEST_CTRL (1 << 10)
#define RS1B_DESCRAMBLER_LOCKED (1 << 9)
#define RS1B_FALSE_CARRIER_DETECT (1 << 8)
#define RS1B_BAD_ESD_DETECT (1 << 7)
#define RS1B_RX_ERROR_DETECT (1 << 6)
#define RS1B_LOCK_ERROR_DETECT (1 << 4)
#define RS1B_MLT3_ERROR_DETECT (1 << 3)
//ST802RT1A Ethernet PHY driver
extern const PhyDriver st802rt1aPhyDriver;
//ST802RT1A related functions
error_t st802rt1aInit(NetInterface *interface);
void st802rt1aTick(NetInterface *interface);
void st802rt1aEnableIrq(NetInterface *interface);
void st802rt1aDisableIrq(NetInterface *interface);
void st802rt1aEventHandler(NetInterface *interface);
void st802rt1aWritePhyReg(NetInterface *interface, uint8_t address, uint16_t data);
uint16_t st802rt1aReadPhyReg(NetInterface *interface, uint8_t address);
void st802rt1aDumpPhyReg(NetInterface *interface);
#endif