Sergey Pastor
Webserver+3d print
cyclone_tcp/drivers/ksz8051.h
- Committer:
- Sergunb
- Date:
- 2017-02-04
- Revision:
- 0:8918a71cdbe9
File content as of revision 0:8918a71cdbe9:
/**
* @file ksz8051.h
* @brief KSZ8051 Ethernet PHY transceiver
*
* @section License
*
* Copyright (C) 2010-2017 Oryx Embedded SARL. All rights reserved.
*
* This file is part of CycloneTCP Open.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
* @author Oryx Embedded SARL (www.oryx-embedded.com)
* @version 1.7.6
**/
#ifndef _KSZ8051_H
#define _KSZ8051_H
//Dependencies
#include "core/nic.h"
//PHY address
#ifndef KSZ8051_PHY_ADDR
#define KSZ8051_PHY_ADDR 1
#elif (KSZ8051_PHY_ADDR < 0 || KSZ8051_PHY_ADDR > 31)
#error KSZ8051_PHY_ADDR parameter is not valid
#endif
//KSZ8051 registers
#define KSZ8051_PHY_REG_BMCR 0x00
#define KSZ8051_PHY_REG_BMSR 0x01
#define KSZ8051_PHY_REG_PHYIDR1 0x02
#define KSZ8051_PHY_REG_PHYIDR2 0x03
#define KSZ8051_PHY_REG_ANAR 0x04
#define KSZ8051_PHY_REG_ANLPAR 0x05
#define KSZ8051_PHY_REG_ANER 0x06
#define KSZ8051_PHY_REG_ANNPTR 0x07
#define KSZ8051_PHY_REG_LPNPAR 0x08
#define KSZ8051_PHY_REG_AFECON1 0x11
#define KSZ8051_PHY_REG_RXERCTR 0x15
#define KSZ8051_PHY_REG_OMSO 0x16
#define KSZ8051_PHY_REG_OMSS 0x17
#define KSZ8051_PHY_REG_EXCON 0x18
#define KSZ8051_PHY_REG_ICSR 0x1B
#define KSZ8051_PHY_REG_LINKMDCS 0x1D
#define KSZ8051_PHY_REG_PHYCON1 0x1E
#define KSZ8051_PHY_REG_PHYCON2 0x1F
//BMCR register
#define BMCR_RESET (1 << 15)
#define BMCR_LOOPBACK (1 << 14)
#define BMCR_SPEED_SEL (1 << 13)
#define BMCR_AN_EN (1 << 12)
#define BMCR_POWER_DOWN (1 << 11)
#define BMCR_ISOLATE (1 << 10)
#define BMCR_RESTART_AN (1 << 9)
#define BMCR_DUPLEX_MODE (1 << 8)
#define BMCR_COL_TEST (1 << 7)
//BMSR register
#define BMSR_100BT4 (1 << 15)
#define BMSR_100BTX_FD (1 << 14)
#define BMSR_100BTX (1 << 13)
#define BMSR_10BT_FD (1 << 12)
#define BMSR_10BT (1 << 11)
#define BMSR_NO_PREAMBLE (1 << 6)
#define BMSR_AN_COMPLETE (1 << 5)
#define BMSR_REMOTE_FAULT (1 << 4)
#define BMSR_AN_ABLE (1 << 3)
#define BMSR_LINK_STATUS (1 << 2)
#define BMSR_JABBER_DETECT (1 << 1)
#define BMSR_EXTENDED_CAP (1 << 0)
//ANAR register
#define ANAR_NEXT_PAGE (1 << 15)
#define ANAR_REMOTE_FAULT (1 << 13)
#define ANAR_PAUSE1 (1 << 11)
#define ANAR_PAUSE0 (1 << 10)
#define ANAR_100BT4 (1 << 9)
#define ANAR_100BTX_FD (1 << 8)
#define ANAR_100BTX (1 << 7)
#define ANAR_10BT_FD (1 << 6)
#define ANAR_10BT (1 << 5)
#define ANAR_SELECTOR4 (1 << 4)
#define ANAR_SELECTOR3 (1 << 3)
#define ANAR_SELECTOR2 (1 << 2)
#define ANAR_SELECTOR1 (1 << 1)
#define ANAR_SELECTOR0 (1 << 0)
//ANLPAR register
#define ANLPAR_NEXT_PAGE (1 << 15)
#define ANLPAR_LP_ACK (1 << 14)
#define ANLPAR_REMOTE_FAULT (1 << 13)
#define ANLPAR_PAUSE1 (1 << 11)
#define ANLPAR_PAUSE0 (1 << 10)
#define ANLPAR_100BT4 (1 << 9)
#define ANLPAR_100BTX_FD (1 << 8)
#define ANLPAR_100BTX (1 << 7)
#define ANLPAR_10BT_FD (1 << 6)
#define ANLPAR_10BT (1 << 5)
#define ANLPAR_SELECTOR4 (1 << 4)
#define ANLPAR_SELECTOR3 (1 << 3)
#define ANLPAR_SELECTOR2 (1 << 2)
#define ANLPAR_SELECTOR1 (1 << 1)
#define ANLPAR_SELECTOR0 (1 << 0)
//ANER register
#define ANER_PAR_DET_FAULT (1 << 4)
#define ANER_LP_NEXT_PAGE_ABLE (1 << 3)
#define ANER_NEXT_PAGE_ABLE (1 << 2)
#define ANER_PAGE_RECEIVED (1 << 1)
#define ANER_LP_AN_ABLE (1 << 0)
//ANNPTR register
#define ANNPTR_NEXT_PAGE (1 << 15)
#define ANNPTR_MSG_PAGE (1 << 13)
#define ANNPTR_ACK2 (1 << 12)
#define ANNPTR_TOGGLE (1 << 11)
#define ANNPTR_MESSAGE10 (1 << 10)
#define ANNPTR_MESSAGE9 (1 << 9)
#define ANNPTR_MESSAGE8 (1 << 8)
#define ANNPTR_MESSAGE7 (1 << 7)
#define ANNPTR_MESSAGE6 (1 << 6)
#define ANNPTR_MESSAGE5 (1 << 5)
#define ANNPTR_MESSAGE4 (1 << 4)
#define ANNPTR_MESSAGE3 (1 << 3)
#define ANNPTR_MESSAGE2 (1 << 2)
#define ANNPTR_MESSAGE1 (1 << 1)
#define ANNPTR_MESSAGE0 (1 << 0)
//LPNPAR register
#define LPNPAR_NEXT_PAGE (1 << 15)
#define LPNPAR_ACK (1 << 14)
#define LPNPAR_MSG_PAGE (1 << 13)
#define LPNPAR_ACK2 (1 << 12)
#define LPNPAR_TOGGLE (1 << 11)
#define LPNPAR_MESSAGE10 (1 << 10)
#define LPNPAR_MESSAGE9 (1 << 9)
#define LPNPAR_MESSAGE8 (1 << 8)
#define LPNPAR_MESSAGE7 (1 << 7)
#define LPNPAR_MESSAGE6 (1 << 6)
#define LPNPAR_MESSAGE5 (1 << 5)
#define LPNPAR_MESSAGE4 (1 << 4)
#define LPNPAR_MESSAGE3 (1 << 3)
#define LPNPAR_MESSAGE2 (1 << 2)
#define LPNPAR_MESSAGE1 (1 << 1)
#define LPNPAR_MESSAGE0 (1 << 0)
//AFECON1 register
#define AFECON1_SLOW_OSC_MODE_EN (1 << 5)
//OMSO register
#define OMSO_BCAST_OFF_OVERRIDE (1 << 9)
#define OMSO_MII_BTB_OVERRIDE (1 << 7)
#define OMSO_RMII_BTB_OVERRIDE (1 << 6)
#define OMSO_NAND_TREE_OVERRIDE (1 << 5)
#define OMSO_RMII_OVERRIDE (1 << 1)
#define OMSO_MII_OVERRIDE (1 << 0)
//OMSS register
#define OMSS_PHYAD2 (1 << 15)
#define OMSS_PHYAD1 (1 << 14)
#define OMSS_PHYAD0 (1 << 13)
#define OMSS_BCAST_OFF_STATUS (1 << 9)
#define OMSS_MII_BTB_STATUS (1 << 7)
#define OMSS_RMII_BTB_STATUS (1 << 6)
#define OMSS_NAND_TREE_STATUS (1 << 5)
#define OMSS_RMII_STATUS (1 << 1)
#define OMSS_MII_STATUS (1 << 0)
//EXCON register
#define EXCON_EDPD_DIS (1 << 11)
#define EXCON_100BTX_PREAMBLE_RES (1 << 10)
#define EXCON_10BT_PREAMBLE_RES (1 << 6)
//ICSR register
#define ICSR_JABBER_IE (1 << 15)
#define ICSR_RECEIVE_ERROR_IE (1 << 14)
#define ICSR_PAGE_RECEIVED_IE (1 << 13)
#define ICSR_PAR_DET_FAULT_IE (1 << 12)
#define ICSR_LP_ACK_IE (1 << 11)
#define ICSR_LINK_DOWN_IE (1 << 10)
#define ICSR_REMOTE_FAULT_IE (1 << 9)
#define ICSR_LINK_UP_IE (1 << 8)
#define ICSR_JABBER_IF (1 << 7)
#define ICSR_RECEIVE_ERROR_IF (1 << 6)
#define ICSR_PAGE_RECEIVED_IF (1 << 5)
#define ICSR_PAR_DET_FAULT_IF (1 << 4)
#define ICSR_LP_ACK_IF (1 << 3)
#define ICSR_LINK_DOWN_IF (1 << 2)
#define ICSR_REMOTE_FAULT_IF (1 << 1)
#define ICSR_LINK_UP_IF (1 << 0)
//LINKMDCS register
#define LINKMDCS_CABLE_DIAG_EN (1 << 15)
#define LINKMDCS_CABLE_DIAG_RES1 (1 << 14)
#define LINKMDCS_CABLE_DIAG_RES0 (1 << 13)
#define LINKMDCS_SHORT_CABLE (1 << 12)
#define LINKMDCS_CABLE_FAULT_CNT8 (1 << 8)
#define LINKMDCS_CABLE_FAULT_CNT7 (1 << 7)
#define LINKMDCS_CABLE_FAULT_CNT6 (1 << 6)
#define LINKMDCS_CABLE_FAULT_CNT5 (1 << 5)
#define LINKMDCS_CABLE_FAULT_CNT4 (1 << 4)
#define LINKMDCS_CABLE_FAULT_CNT3 (1 << 3)
#define LINKMDCS_CABLE_FAULT_CNT2 (1 << 2)
#define LINKMDCS_CABLE_FAULT_CNT1 (1 << 1)
#define LINKMDCS_CABLE_FAULT_CNT0 (1 << 0)
//PHYCON1 register
#define PHYCON1_PAUSE_EN (1 << 9)
#define PHYCON1_LINK_STATUS (1 << 8)
#define PHYCON1_POL_STATUS (1 << 7)
#define PHYCON1_MDIX_STATE (1 << 5)
#define PHYCON1_ENERGY_DETECT (1 << 4)
#define PHYCON1_ISOLATE (1 << 3)
#define PHYCON1_OP_MODE2 (1 << 2)
#define PHYCON1_OP_MODE1 (1 << 1)
#define PHYCON1_OP_MODE0 (1 << 0)
//Operation mode indication
#define PHYCON1_OP_MODE_MASK (7 << 0)
#define PHYCON1_OP_MODE_AN (0 << 0)
#define PHYCON1_OP_MODE_10BT (1 << 0)
#define PHYCON1_OP_MODE_100BTX (2 << 0)
#define PHYCON1_OP_MODE_10BT_FD (5 << 0)
#define PHYCON1_OP_MODE_100BTX_FD (6 << 0)
//PHYCON2 register
#define PHYCON2_HP_MDIX (1 << 15)
#define PHYCON2_MDIX_SEL (1 << 14)
#define PHYCON2_PAIR_SWAP_DIS (1 << 13)
#define PHYCON2_FORCE_LINK (1 << 11)
#define PHYCON2_POWER_SAVING (1 << 10)
#define PHYCON2_INT_LEVEL (1 << 9)
#define PHYCON2_JABBER_EN (1 << 8)
#define PHYCON2_RMII_REF_CLK_SEL (1 << 7)
#define PHYCON2_LED_MODE1 (1 << 5)
#define PHYCON2_LED_MODE0 (1 << 4)
#define PHYCON2_TX_DIS (1 << 3)
#define PHYCON2_REMOTE_LOOPBACK (1 << 2)
#define PHYCON2_SQE_TEST_EN (1 << 1)
#define PHYCON2_SCRAMBLER_DIS (1 << 0)
//KSZ8051 Ethernet PHY driver
extern const PhyDriver ksz8051PhyDriver;
//KSZ8051 related functions
error_t ksz8051Init(NetInterface *interface);
void ksz8051Tick(NetInterface *interface);
void ksz8051EnableIrq(NetInterface *interface);
void ksz8051DisableIrq(NetInterface *interface);
void ksz8051EventHandler(NetInterface *interface);
void ksz8051WritePhyReg(NetInterface *interface, uint8_t address, uint16_t data);
uint16_t ksz8051ReadPhyReg(NetInterface *interface, uint8_t address);
void ksz8051DumpPhyReg(NetInterface *interface);
#endif