Diff: cyclone_tcp/drivers/lan9303.c

Revision:

0:8918a71cdbe9

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/cyclone_tcp/drivers/lan9303.c	Sat Feb 04 18:15:49 2017 +0000
@@ -0,0 +1,384 @@
+/**
+ * @file lan9303.c
+ * @brief LAN9303 Ethernet switch
+ *
+ * @section License
+ *
+ * Copyright (C) 2010-2017 Oryx Embedded SARL. All rights reserved.
+ *
+ * This file is part of CycloneTCP Open.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * @author Oryx Embedded SARL (www.oryx-embedded.com)
+ * @version 1.7.6
+ **/
+
+//Switch to the appropriate trace level
+#define TRACE_LEVEL NIC_TRACE_LEVEL
+
+//Dependencies
+#include "core/net.h"
+#include "drivers/lan9303.h"
+#include "debug.h"
+
+
+/**
+ * @brief LAN9303 Ethernet switch driver
+ **/
+
+const PhyDriver lan9303PhyDriver =
+{
+   lan9303Init,
+   lan9303Tick,
+   lan9303EnableIrq,
+   lan9303DisableIrq,
+   lan9303EventHandler,
+};
+
+
+/**
+ * @brief LAN9303 Ethernet switch initialization
+ * @param[in] interface Underlying network interface
+ * @return Error code
+ **/
+
+error_t lan9303Init(NetInterface *interface)
+{
+   uint_t port;
+
+   //Debug message
+   TRACE_INFO("Initializing LAN9303...\r\n");
+
+   //Loop through ports
+   for(port = LAN9303_PORT1; port <= LAN9303_PORT2; port++)
+   {
+      //Debug message
+      TRACE_INFO("Port %u:\r\n", port);
+      //Dump PHY registers for debugging purpose
+      lan9303DumpPhyReg(interface, port);
+   }
+
+   //Force the TCP/IP stack to poll the link state at startup
+   interface->phyEvent = TRUE;
+   //Notify the TCP/IP stack of the event
+   osSetEvent(&netEvent);
+
+   //Successful initialization
+   return NO_ERROR;
+}
+
+
+/**
+ * @brief Get link state
+ * @param[in] interface Underlying network interface
+ * @param[in] port Port number
+ * @return Link state
+ **/
+
+bool_t lan9303GetLinkState(NetInterface *interface, uint8_t port)
+{
+   uint16_t status;
+   bool_t linkState;
+
+   //Check port number
+   if(port >= LAN9303_PORT1 && port <= LAN9303_PORT2)
+   {
+      //Get exclusive access
+      osAcquireMutex(&netMutex);
+      //Read status register
+      status = lan9303ReadPhyReg(interface, port, LAN9303_PHY_REG_BMSR);
+      //Release exclusive access
+      osReleaseMutex(&netMutex);
+
+      //Retrieve current link state
+      linkState = (status & BMSR_LINK_STATUS) ? TRUE : FALSE;
+   }
+   else
+   {
+      //The specified port number is not valid
+      linkState = FALSE;
+   }
+
+   //Return link status
+   return linkState;
+}
+
+
+/**
+ * @brief LAN9303 timer handler
+ * @param[in] interface Underlying network interface
+ **/
+
+void lan9303Tick(NetInterface *interface)
+{
+   uint_t port;
+   uint16_t status;
+   bool_t linkState;
+
+   //Initialize link state
+   linkState = FALSE;
+
+   //Loop through ports
+   for(port = LAN9303_PORT1; port <= LAN9303_PORT2; port++)
+   {
+      //Read status register
+      status = lan9303ReadPhyReg(interface, port, LAN9303_PHY_REG_BMSR);
+
+      //Retrieve current link state
+      if(status & BMSR_LINK_STATUS)
+         linkState = TRUE;
+   }
+
+   //Link up event?
+   if(linkState)
+   {
+      if(!interface->linkState)
+      {
+         //Set event flag
+         interface->phyEvent = TRUE;
+         //Notify the TCP/IP stack of the event
+         osSetEvent(&netEvent);
+      }
+   }
+   //Link down event?
+   else
+   {
+      if(interface->linkState)
+      {
+         //Set event flag
+         interface->phyEvent = TRUE;
+         //Notify the TCP/IP stack of the event
+         osSetEvent(&netEvent);
+      }
+   }
+}
+
+
+/**
+ * @brief Enable interrupts
+ * @param[in] interface Underlying network interface
+ **/
+
+void lan9303EnableIrq(NetInterface *interface)
+{
+}
+
+
+/**
+ * @brief Disable interrupts
+ * @param[in] interface Underlying network interface
+ **/
+
+void lan9303DisableIrq(NetInterface *interface)
+{
+}
+
+
+/**
+ * @brief LAN9303 event handler
+ * @param[in] interface Underlying network interface
+ **/
+
+void lan9303EventHandler(NetInterface *interface)
+{
+   uint_t port;
+   uint16_t status;
+   bool_t linkState;
+
+   //Initialize link state
+   linkState = FALSE;
+
+   //Loop through ports
+   for(port = LAN9303_PORT1; port <= LAN9303_PORT2; port++)
+   {
+      //Read status register
+      status = lan9303ReadPhyReg(interface, port, LAN9303_PHY_REG_BMSR);
+
+      //Retrieve current link state
+      if(status & BMSR_LINK_STATUS)
+         linkState = TRUE;
+   }
+
+   //Link up event?
+   if(linkState)
+   {
+      //Set current speed
+      interface->linkSpeed = NIC_LINK_SPEED_100MBPS;
+      //Set duplex mode
+      interface->duplexMode = NIC_FULL_DUPLEX_MODE;
+
+      //Update link state
+      interface->linkState = TRUE;
+
+      //Adjust MAC configuration parameters for proper operation
+      interface->nicDriver->updateMacConfig(interface);
+   }
+   else
+   {
+      //Update link state
+      interface->linkState = FALSE;
+   }
+
+   //Process link state change event
+   nicNotifyLinkChange(interface);
+}
+
+
+/**
+ * @brief Write PHY register
+ * @param[in] interface Underlying network interface
+ * @param[in] port Port number
+ * @param[in] address PHY register address
+ * @param[in] data Register value
+ **/
+
+void lan9303WritePhyReg(NetInterface *interface,
+   uint8_t port, uint8_t address, uint16_t data)
+{
+   //Write the specified PHY register
+   interface->nicDriver->writePhyReg(port, address, data);
+}
+
+
+/**
+ * @brief Read PHY register
+ * @param[in] interface Underlying network interface
+ * @param[in] port Port number
+ * @param[in] address PHY register address
+ * @return Register value
+ **/
+
+uint16_t lan9303ReadPhyReg(NetInterface *interface,
+   uint8_t port, uint8_t address)
+{
+   //Read the specified PHY register
+   return interface->nicDriver->readPhyReg(port, address);
+}
+
+
+/**
+ * @brief Dump PHY registers for debugging purpose
+ * @param[in] interface Underlying network interface
+ * @param[in] port Port number
+ **/
+
+void lan9303DumpPhyReg(NetInterface *interface, uint8_t port)
+{
+   uint8_t i;
+
+   //Loop through PHY registers
+   for(i = 0; i < 32; i++)
+   {
+      //Display current PHY register
+      TRACE_DEBUG("%02" PRIu8 ": 0x%04" PRIX16 "\r\n", i,
+         lan9303ReadPhyReg(interface, port, i));
+   }
+
+   //Terminate with a line feed
+   TRACE_DEBUG("\r\n");
+}
+
+
+/**
+ * @brief Write SMI register
+ * @param[in] interface Underlying network interface
+ * @param[in] address System register address
+ * @param[in] data Register value
+ **/
+
+void lan9303WriteSmiReg(NetInterface *interface, uint16_t address,
+   uint32_t data)
+{
+   uint8_t phyAddr;
+   uint8_t regAddr;
+
+   //PHY address bit 4 is 1 for SMI commands. PHY address 3:0 form
+   //system register address bits 9:6
+   phyAddr = 0x10 | ((address >> 6) & 0x0F);
+
+   //Register address field forms register address bits 5:1
+   regAddr = (address >> 1) & 0x1F;
+
+   //Get exclusive access
+   osAcquireMutex(&netMutex);
+
+   //Write the low word of the SMI register
+   interface->nicDriver->writePhyReg(phyAddr, regAddr, data & 0xFFFF);
+   //Write the high word of the SMI register
+   interface->nicDriver->writePhyReg(phyAddr, regAddr + 1, (data >> 16) & 0xFFFF);
+
+   //Release exclusive access
+   osReleaseMutex(&netMutex);
+}
+
+
+/**
+ * @brief Read SMI register
+ * @param[in] interface Underlying network interface
+ * @param[in] address System register address
+ * @return Register value
+ **/
+
+uint32_t lan9303ReadSmiReg(NetInterface *interface, uint16_t address)
+{
+   uint8_t phyAddr;
+   uint8_t regAddr;
+   uint32_t data;
+
+   //PHY address bit 4 is 1 for SMI commands. PHY address 3:0 form
+   //system register address bits 9:6
+   phyAddr = 0x10 | ((address >> 6) & 0x0F);
+
+   //Register address field forms register address bits 5:1
+   regAddr = (address >> 1) & 0x1F;
+
+   //Get exclusive access
+   osAcquireMutex(&netMutex);
+
+   //Read the low word of the SMI register
+   data = interface->nicDriver->readPhyReg(phyAddr, regAddr);
+   //Read the high word of the SMI register
+   data |= interface->nicDriver->readPhyReg(phyAddr, regAddr + 1) << 16;
+
+   //Release exclusive access
+   osReleaseMutex(&netMutex);
+
+   //Return register value
+   return data;
+}
+
+
+/**
+ * @brief Dump SMI registers for debugging purpose
+ * @param[in] interface Underlying network interface
+ **/
+
+void lan9303DumpSmiReg(NetInterface *interface)
+{
+   uint16_t i;
+
+   //Loop through SMI registers
+   for(i = 80; i < 512; i += 4)
+   {
+      //Display current SMI register
+      TRACE_DEBUG("0x%03" PRIX16 ": 0x%08" PRIX32 "\r\n", i,
+         lan9303ReadSmiReg(interface, i));
+   }
+
+   //Terminate with a line feed
+   TRACE_DEBUG("\r\n");
+}
+