Sam Clarke / Mbed 2 deprecated GPS-GPRS_Tracker

An SMS based GPS tracker using the Adafruit Ultimate GPS module http://www.adafruit.com/products/746 and the Seeed Studio GPRS shield (Sim900 chipset) http://www.seeedstudio.com/depot/gprs-shield-p-779.html?cPath=132_134

Dependencies:   GPS MODSERIAL mbed-rtos mbed

You are viewing an older revision! See the latest version

Homepage

Table of Contents

  1. SMS based GPS tracker

SMS based GPS tracker

Currently the GPRS shield is switched on manually, and should be done about 10 seconds before powering the mbed/GPS in order to disable echo properly during start up. This could easily be fixed by switching the GPRS shield with the mbed at start up, waiting the 10 seconds, set the echo then flush the buffer.

The mbed can read all 160 ASCII chars sent in a message for control.

http://i47.tinypic.com/35alpue.png http://i48.tinypic.com/2mi3y0z.png

The Seeed GPRS shield http://www.seeedstudio.com/depot/gprs-shield-p-779.html?cPath=132_134

The Adafruit Ultimate GPS http://www.adafruit.com/products/746

All wikipages