![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Test of new controller lib SSD1963 and HX8352-A
Test for the new libs. I implemented a driver lib for SSD1963 (TFT 272x480) and HX8352-A (TFT 240x400). Both displays have a 40 pin connector with same pin.
Image of the 240x400 board with HX8352-A
I used a ST Nucleo F401RE for testing. The 16bit databus is connected to port C (DB0->PC_0, DB1->PC_1...) Control pins: CS -> PB_1 Reset -> PB_0 RS -> PB_7 WR -> PB_6 RD -> PB_2 (not needed, there is no procedure for reading data from display controller) BL -> PB_13 (PWM back lit control. Not tested yet.)
Both displays need a 16 bit bus for command and data and 4 or 5 pins for control.
I discovered some strange problems with my Nucleo board. It seems there is a power issue using this quit big displays. I had some wired output on display. After stetting jumper to E5V and powering the board from a 5V supply, it looks very good.
TODO:
- Testing the touch sensor
- Wiring and testing SDcard connector
- Testing with a Freescale FRDM board
TFTLCD.lib@0:f7f2e9764273, 2014-05-30 (annotated)
- Committer:
- RobertFischer
- Date:
- Fri May 30 08:43:07 2014 +0000
- Revision:
- 0:f7f2e9764273
Test for new controller lib SSD1963. Still some scrambled output
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
RobertFischer | 0:f7f2e9764273 | 1 | http://mbed.org/users/RobertFischer/code/TFTLCD/#fe9a2e0ce659 |