LoRa send is causing hang-up when a gps fix is acquired

Dependencies:   mbed LoRaWAN-lib_publishing_testing_UART_bug SingleFrequencyLora

Fork of simple-demo-76_revised_20171113_copy by Rishin Amin

Revision:
1:352f608c3337
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/system/crypto/aes.h	Thu Nov 26 12:59:52 2015 +0000
@@ -0,0 +1,160 @@
+/*
+ ---------------------------------------------------------------------------
+ Copyright (c) 1998-2008, Brian Gladman, Worcester, UK. All rights reserved.
+
+ LICENSE TERMS
+
+ The redistribution and use of this software (with or without changes)
+ is allowed without the payment of fees or royalties provided that:
+
+  1. source code distributions include the above copyright notice, this
+     list of conditions and the following disclaimer;
+
+  2. binary distributions include the above copyright notice, this list
+     of conditions and the following disclaimer in their documentation;
+
+  3. the name of the copyright holder is not used to endorse products
+     built using this software without specific written permission.
+
+ DISCLAIMER
+
+ This software is provided 'as is' with no explicit or implied warranties
+ in respect of its properties, including, but not limited to, correctness
+ and/or fitness for purpose.
+ ---------------------------------------------------------------------------
+ Issue 09/09/2006
+
+ This is an AES implementation that uses only 8-bit byte operations on the
+ cipher state.
+ */
+
+#ifndef AES_H
+#define AES_H
+
+#if 1
+#  define AES_ENC_PREKEYED  /* AES encryption with a precomputed key schedule  */
+#endif
+#if 0
+#  define AES_DEC_PREKEYED  /* AES decryption with a precomputed key schedule  */
+#endif
+#if 0
+#  define AES_ENC_128_OTFK  /* AES encryption with 'on the fly' 128 bit keying */
+#endif
+#if 0
+#  define AES_DEC_128_OTFK  /* AES decryption with 'on the fly' 128 bit keying */
+#endif
+#if 0
+#  define AES_ENC_256_OTFK  /* AES encryption with 'on the fly' 256 bit keying */
+#endif
+#if 0
+#  define AES_DEC_256_OTFK  /* AES decryption with 'on the fly' 256 bit keying */
+#endif
+
+#define N_ROW                   4
+#define N_COL                   4
+#define N_BLOCK   (N_ROW * N_COL)
+#define N_MAX_ROUNDS           14
+
+typedef uint8_t return_type;
+
+/*  Warning: The key length for 256 bit keys overflows a byte
+    (see comment below)
+*/
+
+typedef uint8_t length_type;
+
+typedef struct
+{   uint8_t ksch[(N_MAX_ROUNDS + 1) * N_BLOCK];
+    uint8_t rnd;
+} aes_context;
+
+/*  The following calls are for a precomputed key schedule
+
+    NOTE: If the length_type used for the key length is an
+    unsigned 8-bit character, a key length of 256 bits must
+    be entered as a length in bytes (valid inputs are hence
+    128, 192, 16, 24 and 32).
+*/
+
+#if defined( AES_ENC_PREKEYED ) || defined( AES_DEC_PREKEYED )
+
+return_type aes_set_key( const uint8_t key[],
+                         length_type keylen,
+                         aes_context ctx[1] );
+#endif
+
+#if defined( AES_ENC_PREKEYED )
+
+return_type aes_encrypt( const uint8_t in[N_BLOCK],
+                         uint8_t out[N_BLOCK],
+                         const aes_context ctx[1] );
+
+return_type aes_cbc_encrypt( const uint8_t *in,
+                         uint8_t *out,
+                         int32_t n_block,
+                         uint8_t iv[N_BLOCK],
+                         const aes_context ctx[1] );
+#endif
+
+#if defined( AES_DEC_PREKEYED )
+
+return_type aes_decrypt( const uint8_t in[N_BLOCK],
+                         uint8_t out[N_BLOCK],
+                         const aes_context ctx[1] );
+
+return_type aes_cbc_decrypt( const uint8_t *in,
+                         uint8_t *out,
+                         int32_t n_block,
+                         uint8_t iv[N_BLOCK],
+                         const aes_context ctx[1] );
+#endif
+
+/*  The following calls are for 'on the fly' keying.  In this case the
+    encryption and decryption keys are different.
+
+    The encryption subroutines take a key in an array of bytes in
+    key[L] where L is 16, 24 or 32 bytes for key lengths of 128,
+    192, and 256 bits respectively.  They then encrypts the input
+    data, in[] with this key and put the reult in the output array
+    out[].  In addition, the second key array, o_key[L], is used
+    to output the key that is needed by the decryption subroutine
+    to reverse the encryption operation.  The two key arrays can
+    be the same array but in this case the original key will be
+    overwritten.
+
+    In the same way, the decryption subroutines output keys that
+    can be used to reverse their effect when used for encryption.
+
+    Only 128 and 256 bit keys are supported in these 'on the fly'
+    modes.
+*/
+
+#if defined( AES_ENC_128_OTFK )
+void aes_encrypt_128( const uint8_t in[N_BLOCK],
+                      uint8_t out[N_BLOCK],
+                      const uint8_t key[N_BLOCK],
+                      uint8_t o_key[N_BLOCK] );
+#endif
+
+#if defined( AES_DEC_128_OTFK )
+void aes_decrypt_128( const uint8_t in[N_BLOCK],
+                      uint8_t out[N_BLOCK],
+                      const uint8_t key[N_BLOCK],
+                      uint8_t o_key[N_BLOCK] );
+#endif
+
+#if defined( AES_ENC_256_OTFK )
+void aes_encrypt_256( const uint8_t in[N_BLOCK],
+                      uint8_t out[N_BLOCK],
+                      const uint8_t key[2 * N_BLOCK],
+                      uint8_t o_key[2 * N_BLOCK] );
+#endif
+
+#if defined( AES_DEC_256_OTFK )
+void aes_decrypt_256( const uint8_t in[N_BLOCK],
+                      uint8_t out[N_BLOCK],
+                      const uint8_t key[2 * N_BLOCK],
+                      uint8_t o_key[2 * N_BLOCK] );
+#endif
+
+#endif