Dependents of SPI_STMPE610

A dependent is a program or library which makes use of this library.

Motoo Tanaka / TS_Eyes Featured
TS Eyes A simple program to test TSI function of FRDM-KL25Z board using the Adafruit 2.8" TFT with Touch Sensor. It behaves like the X11eyes, but this time it follows … FRDM-KL25Z, TFT, TSI
While I was thinking about logging sensor values, I noticed that I have not got clock for this board. Blowsing the mbed API, I found that the ticker could be … clock, FRDM-KL25Z, SPI_STMPE610, TFT
My first trial of using UniGraphic library. FRDM-KL25Z, TFT, touch, UniGraphic, with
STS2 Adafruit TFT ok
Demo program for Adafruit TFT 2.8" TFT resistive touch Shield - TFT screen library from SeeedStudio - touch screen library from Motoo Tanaka - pinout for Nucleo-F103RB
Adafruit TFT 2.8" test program for FRDM-K64F Note: J11 must be cut to make TSC work, but to download the program it must be reconnected, use pin-header and jumper. FRDM-K64F, STMPE610
Simple test program for FRDM-KL25Z and Adafruit 2.8" TFT display. For the touch sensor, only polling mode is implemented. FRDM-KL25Z, TFT
Adafruit 2.8 TFT with Touch test program for ST Nucleo F411RE F411RE, Nucleo, SPI_STMPE610, UniGraphic
UniGraphic library test using MPS2+
Simple test for reading chip id of resistive touch controller on Adafruit TFT Wing.
Motoo Tanaka / Dentaku Featured
Simple integer calculator using FRDM-KL25Z and Adafruit 2.8" TFT with touch \\ "Dentaku" means "Desktop Calculator" in Japanese \\ On 5-Dec-2015, Support for FRDM-K64F, FRDM-K22F, NUCLEO-F411RE added. CALCULATOR, FRDM-K22F, FRDM-K64F, FRDM-KL25Z, NUCLEO-F411RE, UniGraphic
test program for SPI_STMPE610 FRDM-KL25Z, STMPE610, touch sensor
My first mbed-os 5.x test project with MAX32630FTHR and Adafruit 2.4" TFT with touch. max32630fthr
A simple oscilloscope using Adafruit 2.8" TFT with touch. Runs on FRDM-KL25Z, FRDM-K22F, FRDM-K64F, NUCLEO-F411RE. 2 channel analog inputs with 4 trigger modes and time division. FRDM-K64F, FRDM-KL25Z, NUCLEO-F411RE, TFT, touch, trigger, with
Sample TFT to KL25Z program.
A simple meter using Adafruit 2.8 TFT with touch v2 FRDM-KL25Z, TFT, TFT with touch v2, voltage meter
working drivers for https://www.seeedstudio.com/2.8-TFT-Touch-Shield-V2.0-p-1286.html on NUCLEO F767ZI