![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Rohan-Code to measure the tilt of the ADXL355 using COG-AD4050.
Dependencies: include ADXL355 ttmath
main.cpp
- Committer:
- RGurav
- Date:
- 2019-06-14
- Revision:
- 2:13377441fbd8
- Parent:
- 1:ba6c18cce219
- Child:
- 3:6af4defb733f
File content as of revision 2:13377441fbd8:
/* Created on: 27/08/2018 Author: Rohan Gurav Code: Use the following code to read the ADXL355 values connected to the SPI channel of the EV-COG4050-Expander board port0. Check the readme.md for connection info */ #include "mbed.h" #include "ADXL355.h" Serial pc(USBTX, USBRX); int axis = 0; ADXL355 accl(SPI1_CS0, SPI1_MOSI, SPI1_MISO, SPI1_SCLK); // PMOD port float single_axis(float a); float single_axisz(float a); float dual_axis(float a, float b); float tri_axis(float a, float b, float c); int main() { pc.baud(9600); pc.printf("SPI ADXL355 and ADXL357 Demo\r\n"); pc.printf("GET device ID\r\n"); accl.reset(); uint8_t d, ad, mems, device, rev; wait(0.2); ad = accl.read_reg(accl.DEVID_AD); mems = accl.read_reg(accl.DEVID_MST); device = accl.read_reg(accl.PARTID); rev = accl.read_reg(accl.REVID); pc.printf("GET device data [x, y, z, t] \r\n"); accl.set_power_ctl_reg(accl.MEASUREMENT); d=accl.read_reg(accl.POWER_CTL); pc.printf("power control on measurement mode = %x \r\n",d); float x,y,z,t; float a,b,c; double tilt_x, tilt_y, tilt_z; double tilt_2x, tilt_2y; double tilt_3x, tilt_3y, tilt_3z; //pc.printf("Enter no of axis for angle calculation (1/2/3):\r\n"); //pc.scanf("%d",&axis); axis = 2; pc.printf("||x_accl||y_accl||z_accl||x_tilt||y_tilt||z_tilt||\r\n"); wait(1); //Device ID display pc.printf("AD id = %x MEMS id = %x device=%x revision=%x \r\n", ad, mems, device, rev); /*The following part is used to perform 2's complemient and then display the data*/ while (1) { //*accl.axis355_sens x = (accl.convert(accl.scanx())); y = (accl.convert(accl.scany())); z = (accl.convert(accl.scanz())); t = 25+float(accl.scant()-1852)/(-9.05); if (axis==1) { char in = pc.getc(); if(in == 'x') {pc.printf("%0.2f" ,x); } else if(in == 'y') {pc.printf("%0.2f" ,y); } else if(in == 'z') {pc.printf("%0.2f" ,z); } } if (axis==2) { pc.printf("||%0.2f||%0.2f||%0.2f||%0.2f||%0.2f||%0.2f|| \r\n" , x*accl.axis355_sens, y*accl.axis355_sens, z*accl.axis355_sens, tilt_x, tilt_y, tilt_z); wait(0.5); } if (axis==3) { pc.printf("||%0.2f||%0.2f||%0.2f||%0.2f||%0.2f||%0.2f|| \r\n" , x, y, z, tilt_x, tilt_y, tilt_z); wait(1.0); } if (axis == 4) { pc.printf("axis|%0.2f|%0.2f|%0.2f|%0.2f|%0.2f|%0.2f|%0.2f|%0.2f|%0.2f|%0.2f|%0.2f| \r\n" , x*accl.axis355_sens, y*accl.axis355_sens, z*accl.axis355_sens, tilt_x, tilt_y, tilt_z, tilt_2x, tilt_2y, tilt_3x, tilt_3y, tilt_3z); wait(1.0); } } } //the addition of accl should be equal to 1 i.e. ( x+y+z = 1 ) //single axis arcsin (0.2) float single_axis(float a) { a = a*accl.axis355_sens; if (a>1.0f) { a = 1; } else if (a<-1) { a = -1; } else { a = a; } double Y; Y = asin(a); Y = floor((57.2957f*Y)*100)/100; return Y; } //particullary for z axis single float single_axisz(float a) { a = a*accl.axis355_sens; if (a>1.0f) { a = 1; } else if (a<-1) { a = -1; } else { a = a; } double Y; Y = acos(a); Y = floor((57.2957f*Y)*100)/100; return Y; } //Dual Axis float dual_axis(float a, float b) { double Y; Y = 57.2957f * (atan(a/b)); Y = floor(Y*100)/100; return Y; } //Triaxial float tri_axis(float a, float b, float c) { double Y; double X; X = (a)/(sqrt((b*b)+(c*c))); Y= atan(X); Y = floor(Y*57.2957f*100)/100; return Y; }