![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Test
Dependencies: C12832 MMA7660 RPCInterface mbed
Fork of RPC_Serial by
Diff: MMA7660.h
- Revision:
- 1:e245b0b4d96c
diff -r 3ffd66df9efb -r e245b0b4d96c MMA7660.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/MMA7660.h Wed May 13 07:42:37 2015 +0000 @@ -0,0 +1,207 @@ +/* Copyright (c) <year> <copyright holders>, MIT License + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of this software + * and associated documentation files (the "Software"), to deal in the Software without restriction, + * including without limitation the rights to use, copy, modify, merge, publish, distribute, + * sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all copies or + * substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING + * BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "mbed.h" + + +#ifndef MMA7660_H +#define MMA7660_H + +#define MMA7660_ADDRESS 0x98 +#define MMA7660_SENSITIVITY 21.33 + +#define MMA7660_XOUT_R 0x00 +#define MMA7660_YOUT_R 0x01 +#define MMA7660_ZOUT_R 0x02 +#define MMA7660_TILT_R 0x03 +#define MMA7660_INT_R 0x06 +#define MMA7660_MODE_R 0x07 +#define MMA7660_SR_R 0x08 + + +/** An interface for the MMA7660 triple axis accelerometer + * + * @code + * //Uses the measured z-acceleration to drive leds 2 and 3 of the mbed + * + * #include "mbed.h" + * #include "MMA7660.h" + * + * MMA7660 MMA(p28, p27); + * + * DigitalOut connectionLed(LED1); + * PwmOut Zaxis_p(LED2); + * PwmOut Zaxis_n(LED3); + * + * int main() { + * if (MMA.testConnection()) + * connectionLed = 1; + * + * while(1) { + * Zaxis_p = MMA.z(); + * Zaxis_n = -MMA.z(); + * } + * + * } + * @endcode + */ +class MMA7660 +{ +public: + /** + * The 6 different orientations and unknown + * + * Up & Down = X-axis + * Right & Left = Y-axis + * Back & Front = Z-axis + * + */ + enum Orientation {Up, Down, + Right, Left, + Back, Front, + Unknown + }; + + /** + * Creates a new MMA7660 object + * + * @param sda - I2C data pin + * @param scl - I2C clock pin + * @param active - true (default) to enable the device, false to keep it standby + */ + MMA7660(PinName sda, PinName scl, bool active = true); + + /** + * Tests if communication is possible with the MMA7660 + * + * Because the MMA7660 lacks a WHO_AM_I register, this function can only check + * if there is an I2C device that responds to the MMA7660 address + * + * @param return - true for successfull connection, false for no connection + */ + bool testConnection( void ); + + /** + * Sets the active state of the MMA7660 + * + * Note: This is unrelated to awake/sleep mode + * + * @param state - true for active, false for standby + */ + void setActive( bool state); + + /** + * Reads acceleration data from the sensor + * + * When the parameter is a pointer to an integer array it will be the raw data. + * When it is a pointer to a float array it will be the acceleration in g's + * + * @param data - pointer to array with length 3 where the acceleration data will be stored, X-Y-Z + */ + void readData( int *data); + void readData( float *data); + + /** + * Get X-data + * + * @param return - X-acceleration in g's + */ + float x( void ); + + /** + * Get Y-data + * + * @param return - Y-acceleration in g's + */ + float y( void ); + + /** + * Get Z-data + * + * @param return - Z-acceleration in g's + */ + float z( void ); + + /** + * Sets the active samplerate + * + * The entered samplerate will be rounded to nearest supported samplerate. + * Supported samplerates are: 120 - 64 - 32 - 16 - 8 - 4 - 2 - 1 samples/second. + * + * @param samplerate - the samplerate that will be set + */ + void setSampleRate(int samplerate); + + /** + * Returns if it is on its front, back, or unknown side + * + * This is read from MMA7760s registers, page 12 of datasheet + * + * @param return - Front, Back or Unknown orientation + */ + Orientation getSide( void ); + + /** + * Returns if it is on it left, right, down or up side + * + * This is read from MMA7760s registers, page 12 of datasheet + * + * @param return - Left, Right, Down, Up or Unknown orientation + */ + Orientation getOrientation ( void ); + + +private: + + /** + * Writes data to the device + * + * @param adress - register address to write to + * @param data - data to write + */ + void write( char address, char data); + + /** + * Read data from the device + * + * @param adress - register address to write to + * @return - data from the register specified by RA + */ + char read( char adress); + + /** + * Read multiple regigsters from the device, more efficient than using multiple normal reads. + * + * @param adress - register address to write to + * @param length - number of bytes to read + * @param data - pointer where the data needs to be written to + */ + void read( char adress, char *data, int length); + + /** + * Reads single axis + */ + float getSingle(int number); + + I2C _i2c; + bool active; + float samplerate; +}; + + +#endif