Qiayuan Liao / Hobbyking_Cheetah_Compact_DRV8323_14bit

14bit position sensor version.

Dependencies:   mbed-dev-f303 FastPWM3

hw_setup.cpp@22:60276ba87ac6, 2017-03-31 (annotated)

Committer:
benkatz
Date:
Fri Mar 31 18:24:46 2017 +0000
Revision:
22:60276ba87ac6
Parent:
20:bf9ea5125d52
Child:
24:58c2d7571207
Encoder autocalibration for dc offset and harmonics

Who changed what in which revision?

UserRevisionLine numberNew contents of line
benkatz 20:bf9ea5125d52 1
benkatz 20:bf9ea5125d52 2 #include "mbed.h"
benkatz 20:bf9ea5125d52 3 #include "hw_setup.h"
benkatz 20:bf9ea5125d52 4 #include "hw_config.h"
benkatz 20:bf9ea5125d52 5 #include "structs.h"
benkatz 20:bf9ea5125d52 6 #include "FastPWM.h"
benkatz 20:bf9ea5125d52 7
benkatz 20:bf9ea5125d52 8 void Init_PWM(GPIOStruct *gpio){
benkatz 20:bf9ea5125d52 9
benkatz 22:60276ba87ac6 10 RCC->AHB1ENR |= RCC_AHB1ENR_GPIOCEN; // enable the clock to GPIOC
benkatz 22:60276ba87ac6 11 RCC->APB1ENR |= 0x00000001; // enable TIM2 clock
benkatz 22:60276ba87ac6 12 RCC->APB2ENR |= RCC_APB2ENR_TIM1EN; // enable TIM1 clock
benkatz 20:bf9ea5125d52 13
benkatz 22:60276ba87ac6 14 GPIOC->MODER |= (1 << 10); // set pin 5 to be general purpose output for LED
benkatz 20:bf9ea5125d52 15 gpio->enable = new DigitalOut(ENABLE_PIN);
benkatz 20:bf9ea5125d52 16 gpio->pwm_u = new FastPWM(PIN_U);
benkatz 20:bf9ea5125d52 17 gpio->pwm_v = new FastPWM(PIN_V);
benkatz 20:bf9ea5125d52 18 gpio->pwm_w = new FastPWM(PIN_W);
benkatz 20:bf9ea5125d52 19
benkatz 22:60276ba87ac6 20 gpio->phasing = 1;
benkatz 22:60276ba87ac6 21
benkatz 22:60276ba87ac6 22
benkatz 20:bf9ea5125d52 23 //ISR Setup
benkatz 20:bf9ea5125d52 24
benkatz 22:60276ba87ac6 25 NVIC_EnableIRQ(TIM1_UP_TIM10_IRQn); //Enable TIM1 IRQ
benkatz 20:bf9ea5125d52 26
benkatz 22:60276ba87ac6 27 TIM1->DIER |= TIM_DIER_UIE; // enable update interrupt
benkatz 22:60276ba87ac6 28 TIM1->CR1 = 0x40; // CMS = 10, interrupt only when counting up
benkatz 20:bf9ea5125d52 29 TIM1->CR1 |= TIM_CR1_UDIS;
benkatz 22:60276ba87ac6 30 TIM1->CR1 |= TIM_CR1_ARPE; // autoreload on,
benkatz 22:60276ba87ac6 31 TIM1->RCR |= 0x001; // update event once per up/down count of tim1
benkatz 20:bf9ea5125d52 32 TIM1->EGR |= TIM_EGR_UG;
benkatz 20:bf9ea5125d52 33
benkatz 20:bf9ea5125d52 34 //PWM Setup
benkatz 20:bf9ea5125d52 35
benkatz 22:60276ba87ac6 36 TIM1->PSC = 0x0; // no prescaler, timer counts up in sync with the peripheral clock
benkatz 20:bf9ea5125d52 37 //TIM1->ARR = 0x1194; // 20 khz
benkatz 22:60276ba87ac6 38 TIM1->ARR = 0x8CA; // set auto reload, 40 khz
benkatz 22:60276ba87ac6 39 TIM1->CCER |= ~(TIM_CCER_CC1NP); // Interupt when low side is on.
benkatz 22:60276ba87ac6 40 TIM1->CR1 |= TIM_CR1_CEN; // enable TIM1
benkatz 20:bf9ea5125d52 41
benkatz 20:bf9ea5125d52 42 }
benkatz 20:bf9ea5125d52 43
benkatz 20:bf9ea5125d52 44 void Init_ADC(void){
benkatz 20:bf9ea5125d52 45 // ADC Setup
benkatz 22:60276ba87ac6 46 RCC->APB2ENR |= RCC_APB2ENR_ADC2EN; // clock for ADC2
benkatz 22:60276ba87ac6 47 RCC->APB2ENR |= RCC_APB2ENR_ADC1EN; // clock for ADC1
benkatz 22:60276ba87ac6 48 RCC->AHB1ENR |= RCC_AHB1ENR_GPIOCEN; // Enable clock for GPIOC
benkatz 20:bf9ea5125d52 49
benkatz 22:60276ba87ac6 50 ADC->CCR = 0x00000006; // Regular simultaneous mode only
benkatz 22:60276ba87ac6 51 ADC1->CR2 |= ADC_CR2_ADON;//0x00000001; // ADC1 ON
benkatz 22:60276ba87ac6 52 ADC1->SQR3 = 0x000000A; // use PC_0 as input
benkatz 22:60276ba87ac6 53 ADC2->CR2 |= ADC_CR2_ADON;//0x00000001; // ADC1 ON
benkatz 22:60276ba87ac6 54 ADC2->SQR3 = 0x0000000B; // use PC_1 as input
benkatz 22:60276ba87ac6 55 GPIOC->MODER |= 0x0000000f; // Alternate function, PC_0, PC_1 are analog inputs
benkatz 20:bf9ea5125d52 56
benkatz 20:bf9ea5125d52 57 }
benkatz 20:bf9ea5125d52 58
benkatz 20:bf9ea5125d52 59 void Init_DAC(void){
benkatz 22:60276ba87ac6 60 RCC->APB1ENR |= 0x20000000; // Enable clock for DAC
benkatz 22:60276ba87ac6 61 DAC->CR |= 0x00000001; // DAC control reg, both channels ON
benkatz 22:60276ba87ac6 62 GPIOA->MODER |= 0x00000300; // PA04 as analog output
benkatz 20:bf9ea5125d52 63 }
benkatz 20:bf9ea5125d52 64
benkatz 20:bf9ea5125d52 65 void Init_All_HW(GPIOStruct *gpio){
benkatz 20:bf9ea5125d52 66 Init_PWM(gpio);
benkatz 20:bf9ea5125d52 67 Init_ADC();
benkatz 20:bf9ea5125d52 68 //Init_DAC();
benkatz 20:bf9ea5125d52 69
benkatz 20:bf9ea5125d52 70 }