PokittoLib is the library needed for programming the Pokitto DIY game console (www.pokitto.com)

Dependents:   YATTT sd_map_test cPong SnowDemo ... more

PokittoLib

Library for programming Pokitto hardware

How to Use

  1. Import this library to online compiler (see button "import" on the right hand side
  2. DO NOT import mbed-src anymore, a better version is now included inside PokittoLib
  3. Change My_settings.h according to your project
  4. Start coding!

mbed-pokitto/common/SPI.cpp

Committer:
Pokitto
Date:
2017-10-11
Revision:
5:ea7377f3d1af

File content as of revision 5:ea7377f3d1af:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "SPI.h"

#if DEVICE_SPI

namespace mbed {

#if DEVICE_SPI_ASYNCH && TRANSACTION_QUEUE_SIZE_SPI
CircularBuffer<Transaction<SPI>, TRANSACTION_QUEUE_SIZE_SPI> SPI::_transaction_buffer;
#endif

SPI::SPI(PinName mosi, PinName miso, PinName sclk, PinName ssel) :
        _spi(),
#if DEVICE_SPI_ASYNCH
        _irq(this),
        _usage(DMA_USAGE_NEVER),
#endif
        _bits(8),
        _mode(0),
        _hz(1000000) {
    spi_init(&_spi, mosi, miso, sclk, ssel);
    spi_format(&_spi, _bits, _mode, 0);
    spi_frequency(&_spi, _hz);
}

void SPI::format(int bits, int mode) {
    _bits = bits;
    _mode = mode;
    SPI::_owner = NULL; // Not that elegant, but works. rmeyer
    aquire();
}

void SPI::frequency(int hz) {
    _hz = hz;
    SPI::_owner = NULL; // Not that elegant, but works. rmeyer
    aquire();
}

SPI* SPI::_owner = NULL;

// ignore the fact there are multiple physical spis, and always update if it wasnt us last
void SPI::aquire() {
     if (_owner != this) {
        spi_format(&_spi, _bits, _mode, 0);
        spi_frequency(&_spi, _hz);
        _owner = this;
    }
}

int SPI::write(int value) {
    aquire();
    return spi_master_write(&_spi, value);
}

#if DEVICE_SPI_ASYNCH

int SPI::transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event)
{
    if (spi_active(&_spi)) {
        return queue_transfer(tx_buffer, tx_length, rx_buffer, rx_length, bit_width, callback, event);
    }
    start_transfer(tx_buffer, tx_length, rx_buffer, rx_length, bit_width, callback, event);
    return 0;
}

void SPI::abort_transfer()
{
    spi_abort_asynch(&_spi);
#if TRANSACTION_QUEUE_SIZE_SPI
    dequeue_transaction();
#endif
}


void SPI::clear_transfer_buffer()
{
#if TRANSACTION_QUEUE_SIZE_SPI
    _transaction_buffer.reset();
#endif
}

void SPI::abort_all_transfers()
{
    clear_transfer_buffer();
    abort_transfer();
}

int SPI::set_dma_usage(DMAUsage usage)
{
    if (spi_active(&_spi)) {
        return -1;
    }
    _usage = usage;
    return  0;
}

int SPI::queue_transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event)
{
#if TRANSACTION_QUEUE_SIZE_SPI
    transaction_t t;

    t.tx_buffer = const_cast<void *>(tx_buffer);
    t.tx_length = tx_length;
    t.rx_buffer = rx_buffer;
    t.rx_length = rx_length;
    t.event = event;
    t.callback = callback;
    t.width = bit_width;
    Transaction<SPI> transaction(this, t);
    if (_transaction_buffer.full()) {
        return -1; // the buffer is full
    } else {
        _transaction_buffer.push(transaction);
        return 0;
    }
#else
    return -1;
#endif
}

void SPI::start_transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event)
{
    aquire();
    _callback = callback;
    _irq.callback(&SPI::irq_handler_asynch);
    spi_master_transfer(&_spi, tx_buffer, tx_length, rx_buffer, rx_length, bit_width, _irq.entry(), event , _usage);
}

#if TRANSACTION_QUEUE_SIZE_SPI

void SPI::start_transaction(transaction_t *data)
{
    start_transfer(data->tx_buffer, data->tx_length, data->rx_buffer, data->rx_length, data->width, data->callback, data->event);
}

void SPI::dequeue_transaction()
{
    Transaction<SPI> t;
    if (_transaction_buffer.pop(t)) {
        SPI* obj = t.get_object();
        transaction_t* data = t.get_transaction();
        obj->start_transaction(data);
    }
}

#endif

void SPI::irq_handler_asynch(void)
{
    int event = spi_irq_handler_asynch(&_spi);
    if (_callback && (event & SPI_EVENT_ALL)) {
        _callback.call(event & SPI_EVENT_ALL);
    }
#if TRANSACTION_QUEUE_SIZE_SPI
    if (event & (SPI_EVENT_ALL | SPI_EVENT_INTERNAL_TRANSFER_COMPLETE)) {
        // SPI peripheral is free (event happend), dequeue transaction
        dequeue_transaction();
    }
#endif
}

#endif

} // namespace mbed

#endif