Funktionen Umbennenen

Dependencies:   HCSR

Fork of Bertl by Franz Pucher

ur_Bertl.cpp

Committer:
bulmecisco
Date:
2015-03-26
Revision:
2:1cd559ff516b
Parent:
1:fafbac0ba96d
Child:
3:01b183fe8b41

File content as of revision 2:1cd559ff516b:

/***********************************
name:   ur_Bertl.cpp    Version: 1.1
author: PE HTL BULME
email:  pe@bulme.at
description:
    Implementation portion of class ur_Bertl The Robot 
    Blue LED and RGB LED test added
      
***********************************/
#include "mbed.h"
#include "config.h"
#include "ur_Bertl.h"

// Constructor
ur_Bertl::ur_Bertl() : _interrupt(P1_12)            // left sensor P1_13
{
    i2c.frequency(40000);                           // I2C Frequenz 40kHz
    mg1 = mg2 = SPEED;
    _interrupt.rise(this, &ur_Bertl::increment);    // attach increment function of this counter instance ie. motor sensor
    _count = 0;
    beepersInBag = 0;
}

ur_Bertl::ur_Bertl(PinName pin) :  _interrupt(pin)  // create the InterruptIn on the pin specified to Counter
{
    i2c.frequency(40000);                           // I2C Frequenz 40kHz
    mg1 = mg2 = SPEED;
    _interrupt.rise(this, &ur_Bertl::increment);    // attach increment function of this counter instance ie. motor sensor
    _count = 0;
    beepersInBag = 0;
}


// Pulblic methodes
void ur_Bertl::Move()
{
    int count = _count;
    MotorR_EN=MotorL_EN=1;                  // both motor ENABLE
    MotorR_FORWARD = MotorL_FORWARD = 1;    // both motor forward ON
#ifdef TIME
    wait_ms(MOVE);
#else    

    while(_count < count+DISTANCE) {
        //if(!FrontIsClear())       // more convenient because there are no accidents :-)
          //  break;
#ifdef FRONTBUTTON
        if(frontButtonPressed())
            error();
#endif
        DEBUG_PRINT("count: %d _count: %d", count, _count);
    }
#endif
    MotorR_FORWARD = MotorL_FORWARD = 0;    // both motor off
    MotorR_EN=MotorL_EN=0;
    wait_ms(250);
}

void ur_Bertl::PutBeeper()
{
//    wait_ms(500);
    if(beepersInBag > 0)
        beepersInBag--;
    else
        error();
}

void ur_Bertl::PickBeeper()
{
//    wait_ms(500);
    if (linesensor)
        beepersInBag++;
    else 
        error();   
}

void ur_Bertl::TurnLeft()
{
    int count = _count;
    MotorR_EN=MotorL_EN=1;                  // motor left and right ENABLE

    MotorR_FORWARD = MotorL_REVERSE = 1;
#ifdef TIME
    wait_ms(TURN);
#else

    while(_count < count+ANGLE) {
#ifdef FRONTBUTTON
        if(frontButtonPressed())            // get out if to much problems
            error();
#endif
        DEBUG_PRINT("count: %d _count: %d", count, _count);
    }
#endif
    MotorR_FORWARD = MotorL_REVERSE = 0;
    MotorR_EN=MotorL_EN=0;
    wait_ms(250);           // only to step the robot
}

bool ur_Bertl::WaitUntilButtonPressed()
{
    char cmd[3];
    int16_t btns;
    bool wert;

    RGB_blue=RGB_red=RGB_green=0;
    cmd[0] = 0x06;
    cmd[1] = 0x00;
    i2c.write(addr, cmd, 2); 

    cmd[0]=0x01;
    i2c.write(addr, cmd, 1);
    i2c.read(addr|1, cmd, 1);
    btns = cmd[0];
    if( btns & (0xFF))
        wert = false;
    else
        wert = true;
    DEBUG_PRINT("\right\nWERT: %d \right\n", wert);
    return wert;
}

void ur_Bertl::ShutOff()
{
    MotorR_FORWARD = MotorL_FORWARD = 0;    // motor OFF
    MotorR_EN=MotorL_EN=0;                  // motor disable
}

// LEDs methodes

void ur_Bertl::BlueLedsON()
{
      LED_blue=0;
}

void ur_Bertl::BlueLedsOFF()
{
      LED_blue=1;
}

void ur_Bertl::RGBLed(bool red, bool green, bool blue)
{
      RGB_blue=!blue;
      RGB_red=!red;
      RGB_green=!green;
}

void ur_Bertl::TurnLedOn(int16_t led)
{
    char cmd[3];

    if(led == 0xBB) {
        LED_blue=0;
        return;
    } else if (led == 0xFF) {
        RGBLed(1,1,1);
        LED_blue=0;
    }
    cmd[0] = 0x02;
    cmd[1] = ~led;
    i2c.write(addr, cmd, 2);
    wait(0.5);
}

void ur_Bertl::TurnLedOff(int16_t led)
{
    char cmd[3];
    if(led == 0xBB) {
        LED_blue=1;
        return;
    } else if (led == 0xFF) {
        RGBLed(0,0,0);      //don't work?
        LED_blue=1;
    }
    cmd[0] = 0x02;
    cmd[1] = led;
    i2c.write(addr, cmd, 2);
    wait(0.5);
}

void ur_Bertl::NibbleLeds(int value)
{
    NibbleLEDs = value%16;
}

//-----------------INTERNAL USE ONLY ----------------------------
void ur_Bertl::error()
{
    int wait = 500;
    MotorR_FORWARD = MotorL_FORWARD = 0;    // both motor off
    MotorR_REVERSE = MotorL_REVERSE = 0;    // both motor off
    MotorR_EN=MotorL_EN=0;
    while(1) {
        TurnLedOff(0xFF);
        LED_D10 = LED_D11 = LED_D12 = LED_D13 = 0;
        LED_blue=1;
        RGB_blue=RGB_green=RGB_red=1;
        wait_ms(wait);
        TurnLedOn(0xFF);
        LED_D10 = LED_D11 = LED_D12 = LED_D13 = 1;
        LED_blue=0;
        RGB_blue=RGB_green=1;RGB_red=0;
        wait_ms(wait);
    }
}

bool ur_Bertl::frontButtonPressed()
{
    char cmd[3];            // array for I2C
    int16_t btns;
    bool wert;

    cmd[0] = 0x06;
    cmd[1] = 0x00;
    i2c.write(addr, cmd, 2); 

    cmd[0]=0x01;
    i2c.write(addr, cmd, 1);
    i2c.read(addr|1, cmd, 1);
    btns = cmd[0];
    if( btns & (BTN_FL|BTN_FM|BTN_FR|BTN_FRR|BTN_FLL))
        wert = true;
    else
        wert = false;
    DEBUG_PRINT("WERT: %d", wert);
    return wert;
}

// ISR

void ur_Bertl::increment()
{
    _count++;
}

int ur_Bertl::Read()
{
    return _count;
}

//----------------------------------------------------------------------

bool ur_Bertl::FrontIsClear()
{
#ifdef HCSR
    int dist = 0;
    usensor.start();
    wait_ms(10);
    dist=usensor.get_dist_cm();
    if(dist < 5)
        return false;
    else
        return true;
#else
// if there is no ultra sonic sensor use this - with front buttons
    char cmd[3];            // array for I2C
    int16_t btns;
    bool wert;

    cmd[0] = 0x06;
    cmd[1] = 0x00;
    i2c.write(addr, cmd, 2); 

    cmd[0]=0x01;
    i2c.write(addr, cmd, 1);
    i2c.read(addr|1, cmd, 1);
    btns = cmd[0];
    if( btns & (BTN_FL|BTN_FM|BTN_FR))
        wert = false;
    else
        wert = true;
    DEBUG_PRINT("WERT: %d", wert);
    return wert;
#endif
}

/*
bool ur_Bertl::NextToABeeper()
{
    if (BottomIsBlack())
        return true;
    else 
        return false;
}

int ur_Bertl::AnyBeeperInBag()
{
    if(beepersInBag > 0)
        return beepersInBag;
    else
        return 0;
}

bool ur_Bertl::backIsClear()
{
    char cmd[3];            // array for I2C
    int16_t btns;
    bool wert;

    cmd[0] = 0x06;
    cmd[1] = 0x00;
    i2c.write(addr, cmd, 2); 

    cmd[0]=0x01;
    i2c.write(addr, cmd, 1);
    i2c.read(addr|1, cmd, 1);
    btns = cmd[0];
    if( btns & (BTN_BL|BTN_BM|BTN_BR))
        wert = false;
    else
        wert = true;
    DEBUG_PRINT("WERT: %d", wert);
    return wert;
}

int ur_Bertl::BottomIsBlack()
{
    int detect;
    
    detect = linesensor;
    return detect;
}

void ur_Bertl::MoveBackwards()
{
    int count = _count;
    //wait_ms(250);                         // waite until Bertl stops
    MotorR_EN=MotorL_EN=1;                  // both motor ENABLE
    MotorR_REVERSE = MotorL_REVERSE = 1;    // both motor backwards ON
    while(_count < count+DISTANCE) {
        if(!backIsClear())
            break;
        DEBUG_PRINT("count: %d _count: %d", count, _count);
    }
    MotorR_REVERSE = MotorL_REVERSE = 0;    // both motor off
    MotorR_EN=MotorL_EN=0;
    wait_ms(250);
}
*/