mbed library sources change for ST sensors and ST BLE

Fork of mbed-src by mbed official

Revision:
469:fc4922e0c183
Child:
630:825f75ca301e
diff -r 3f6bf90246bd -r fc4922e0c183 targets/hal/TARGET_STM/TARGET_STM32F0/sleep.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F0/sleep.c	Mon Feb 09 09:30:07 2015 +0000
@@ -0,0 +1,107 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "sleep_api.h"
+
+#if DEVICE_SLEEP
+
+#include "cmsis.h"
+
+#if defined(TARGET_STM32F070RB)
+void sleep(void)
+{
+    TIM_HandleTypeDef TimMasterHandle;
+
+    TimMasterHandle.Instance = TIM1;
+
+    // Disable HAL tick and us_ticker update interrupts
+    __HAL_TIM_DISABLE_IT(&TimMasterHandle, (TIM_IT_CC2 | TIM_IT_UPDATE));
+
+    // Request to enter SLEEP mode
+    HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
+
+    // Enable HAL tick and us_ticker update interrupts
+    __HAL_TIM_ENABLE_IT(&TimMasterHandle, (TIM_IT_CC2 | TIM_IT_UPDATE));
+}
+
+#elif defined(TARGET_STM32F030R8) || defined (TARGET_STM32F051R8)
+void sleep(void)
+{
+    // Stop HAL systick
+    HAL_SuspendTick();
+    // Request to enter SLEEP mode
+    HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
+    // Restart HAL systick
+    HAL_ResumeTick();
+}
+
+#else
+static TIM_HandleTypeDef TimMasterHandle;
+
+void sleep(void)
+{
+    TimMasterHandle.Instance = TIM2;
+
+    // Disable HAL tick interrupt
+    __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+
+    // Request to enter SLEEP mode
+    HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
+
+    // Enable HAL tick interrupt
+    __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+}
+#endif
+
+#if defined(TARGET_STM32F030R8) || defined (TARGET_STM32F051R8)
+void deepsleep(void)
+{
+    // Request to enter STOP mode with regulator in low power mode
+    HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+
+    HAL_InitTick(TICK_INT_PRIORITY);
+
+    // After wake-up from STOP reconfigure the PLL
+    SetSysClock();
+
+    HAL_InitTick(TICK_INT_PRIORITY);
+}
+
+#else
+void deepsleep(void)
+{
+    // Request to enter STOP mode with regulator in low power mode
+    HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+
+    // After wake-up from STOP reconfigure the PLL
+    SetSysClock();
+}
+#endif
+
+#endif