mbed library sources change for ST sensors and ST BLE

Fork of mbed-src by mbed official

targets/hal/TARGET_STM/TARGET_STM32L1/sleep.c

Committer:
NickZhouARM
Date:
2016-04-14
Revision:
636:83ea0d2b909b
Parent:
522:aee49fe30179

File content as of revision 636:83ea0d2b909b:

/* mbed Microcontroller Library
 *******************************************************************************
 * Copyright (c) 2014, STMicroelectronics
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 * 3. Neither the name of STMicroelectronics nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *******************************************************************************
 */
#include "sleep_api.h"

#if DEVICE_SLEEP

#include "cmsis.h"

static TIM_HandleTypeDef TimMasterHandle;

void sleep(void)
{
    // Disable HAL tick interrupt
    TimMasterHandle.Instance = TIM5;
    __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);

    // Request to enter SLEEP mode
    HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);

    // Enable HAL tick interrupt
    __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
}

void deepsleep(void)
{
#if defined(TARGET_MOTE_L152RC)
    int8_t STOPEntry = PWR_STOPENTRY_WFI;
#endif

    // Disable HAL tick interrupt
    TimMasterHandle.Instance = TIM5;
    __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);

#if defined(TARGET_MOTE_L152RC)
    /* Select the regulator state in Stop mode: Set PDDS and LPSDSR bit according to PWR_Regulator value */
    MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPSDSR), PWR_LOWPOWERREGULATOR_ON);

    /* Set SLEEPDEEP bit of Cortex System Control Register */
    SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));

    /* Select Stop mode entry --------------------------------------------------*/
    if(STOPEntry == PWR_STOPENTRY_WFI)
    {
        /* Request Wait For Interrupt */
        __WFI();
    }
    else
    {
        /* Request Wait For Event */
        __SEV();
        __WFE();
        __WFE();
    }
    __NOP();
    __NOP();
    __NOP();
    /* Reset SLEEPDEEP bit of Cortex System Control Register */
    CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
#else
    // Request to enter STOP mode with regulator in low power mode
    HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
#endif

    // After wake-up from STOP reconfigure the PLL
    SetSysClock();

    // Enable HAL tick interrupt
    __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
}

#endif