Diff: SWSPI_BI.h

Revision:

0:9efb460e962b

Child:

1:01459a6ab296

diff -r 000000000000 -r 9efb460e962b SWSPI_BI.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SWSPI_BI.h	Tue Sep 23 08:25:23 2014 +0000
@@ -0,0 +1,101 @@
+/* SWSPI_BI, Software SPI library
+ * Copyright (c) 2012-2014, David R. Van Wagner, http://techwithdave.blogspot.com
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef SWSPI_BI_H
+#define SWSPI_BI_H
+
+/** A software implemented SPI that can use any digital pins
+ *
+ * Useful when don't want to share a single SPI hardware among attached devices
+ * or when pinout doesn't match exactly to the target's SPI pins
+ *
+ * @code
+ * #include "mbed.h"
+ * #include "SWSPI_BI.h"
+ * 
+ * SWSPI_BI spi(p5, p6, p7); // mosio, dir  , sclk
+ * 
+ * int main() 
+ * {
+ *     DigitalOut cs(p8);
+ *     spi.format(8, 0);
+ *     spi.frequency(10000000);
+ *     cs.write(0);
+ *     spi.write(0x9f);
+ *     int jedecid = (spi.write(0) << 16) | (spi.write(0) << 8) | spi.write(0);
+ *     cs.write(1);
+ * }
+ * @endcode
+ */
+
+ 
+class SWSPI_BI
+{
+private:
+    DigitalInOut* msio;
+    DigitalOut* ldir;
+    DigitalOut* rdir;
+    DigitalOut* sclk;
+    int port;
+    int bits;
+    int mode;
+    int polarity; // idle clock value
+    int phase; // 0=sample on leading (first) clock edge, 1=trailing (second)
+    int freq;
+    
+public:
+    /** Create SWSPI_BI object
+     *
+     *  @param mosi_pin
+     *  @param miso_pin
+     *  @param sclk_pin
+     */
+    SWSPI_BI(DigitalInOut *msio_pin, DigitalOut *rdir_pin,DigitalOut *ldir_pin, DigitalOut *sclk_pin);
+    
+    /** Destructor */
+    ~SWSPI_BI();
+    
+    /** Specify SPI format
+     *
+     *  @param bits  8 or 16 are typical values
+     *  @param mode  0, 1, 2, or 3 phase (bit1) and idle clock (bit0)
+     */
+    void format(int bits, int mode = 0);
+    
+    /** Specify SPI clock frequency
+     *
+     *  @param hz  frequency (optional, defaults to 10000000)
+     */
+    void frequency(int hz = 10000000);
+    
+    /** Write data and read result
+     *
+     *  @param value  data to write (see format for bit size) 
+     *  @param  DigitalOut  cs line
+     *  @param  lastdata this is the last data of a sequence, sets the cs high at the end 
+     *  @param  nxtrd : next cycle will be a read, set the LVDS interface to master in ( ADC out)     
+     */
+    void  write(unsigned int value, DigitalOut * cs, bool lastdata, int cs_pol=0 ,bool nxtrd=false);
+    unsigned int read( DigitalOut * cs, bool lastdata, int cs_pol=0 );
+};
+
+#endif // SWSPI_BI_H