Humidity and Temperature Sensor - Sensirion SHT1x driver
... more
« Back to documentation index
SHT15 Class Reference
Class: SHT15 Humidity and Temperature Sensor - SHT15 High level software interface.
More...
#include <sht15.hpp >
float getTemperature (void) Function: getTemperature Returns the current temperature. float getHumidity (void) Function: getHumidity Returns the current relative humidity. bool checkBattery (void) Function: checkBattery Returns true if battery voltage drops below 2.4 volt. bool setHeater (bool value) Function: setHeater Enable on chip heating element. bool setResolution (bool value) Function: setResolution Set lower measurement resolution to allow faster update frequencies. bool setOTPReload (bool value) Function: setOTPReload With this operation the calibration data is uploaded to the register before each measurement. void setScale (bool value) Function: setScale Sets output scale to fahrenheit or celcius. bool update (void) Function: update Performs humidity and temperature sensor readout of the chip. bool reset (void) Function: reset Resets the interface, clears the status register to default values. void connectionReset (void) Function: connectionReset If communication with the device is lost the command will reset the serial interface.
Detailed Description
Class: SHT15 Humidity and Temperature Sensor - SHT15 High level software interface.
Definition at line 39 of file sht15.hpp .
Member Function Documentation
bool checkBattery
(
void
)
Function: checkBattery Returns true if battery voltage drops below 2.4 volt.
Values: returns - true on low battery, false otherwise
Definition at line 54 of file sht15.cpp .
void connectionReset
(
void
)
Function: connectionReset If communication with the device is lost the command will reset the serial interface.
Definition at line 117 of file sht15.cpp .
float getHumidity
(
void
)
Function: getHumidity Returns the current relative humidity.
Values: returns - relative humidity.
Definition at line 45 of file sht15.cpp .
float getTemperature
(
void
)
Function: getTemperature Returns the current temperature.
Values: returns - current temperature.
Definition at line 36 of file sht15.cpp .
Function: reset Resets the interface, clears the status register to default values.
And waits for a minimum of 11ms.
Values: return - operation result
Definition at line 94 of file sht15.cpp .
bool setHeater
(
bool
value )
Function: setHeater Enable on chip heating element.
The heater may increase the temperature of the sensor by 5C to 10C beyond ambient temperature.
Values: value - true->on, false->off return - operation result
Definition at line 60 of file sht15.cpp .
bool setOTPReload
(
bool
value )
Function: setOTPReload With this operation the calibration data is uploaded to the register before each measurement.
This may be deactivated for reducing measurement time by about 10ms
Values: value - true->enabled, false->disabled
Definition at line 72 of file sht15.cpp .
bool setResolution
(
bool
value )
Function: setResolution Set lower measurement resolution to allow faster update frequencies.
Resolutions low: 8bit humid. - 12bit temp. high: 12bit humid. - 14bit temp.
Values: value - true->low, false->high return - operation result
Definition at line 66 of file sht15.cpp .
void setScale
(
bool
value )
Function: setScale Sets output scale to fahrenheit or celcius.
Values: value - true->fahrenheit, false->celcius
Definition at line 78 of file sht15.cpp .
Function: update Performs humidity and temperature sensor readout of the chip.
Values: return - operation result
Definition at line 83 of file sht15.cpp .
Roy van Dam
1.7.2