Diff: Beacon.cpp

Revision:

21:a5fb0ae94dc6

Parent:

20:f812f85cf97e

Child:

22:c2f034a13108

--- a/Beacon.cpp	Tue Feb 21 13:33:29 2017 +0000
+++ b/Beacon.cpp	Wed Feb 22 14:59:59 2017 +0000
@@ -36,8 +36,10 @@
 */
 
 unsigned char SET_UUID[21] = {0x41,0x54,0xFF,0xF1,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0D};
-unsigned char SET_VIRTUAL_PACKET_UUID[23] = {0x01,0x01,0x41,0x54,0x01,0x01,0x02,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F,0x0D};
+unsigned char SET_VIRTUAL_PACKET_UUID[23] = {0x01,0x01,0x41,0x54,0x01,0x01,0x02,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x03,0x0B,0x0C,0x05,0x0E,0x0F,0x0D};
 unsigned char SET_VIRTUAL_PACKET_UUID1[23] = {0x41,0x54,0xFF,0xF1,0x02,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x02,0x0B,0x0C,0x05,0x0E,0x0F,0x0D};
+unsigned char SET_VIRTUAL_PACKET_UUID2[23] = {0x12,0x21,0x41,0x54,0xFF,0xF1,0x0F,0x0E,0x0D,0x0C,0x0B,0x0A,0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,0x01,0x00,0x0D};
+unsigned char SET_VIRTUAL_PACKET_UUID3[23] = {0x41,0x54,0xFF,0xF1,0x0F,0x0E,0x0D,0x0C,0x0B,0x04,0x05,0x08,0x07,0x06,0x05,0x04,0x03,0x02,0x01,0x00,0x0D};
 unsigned char SET_MAJOR[7] = {0x41,0x54,0xFF,0xF2,0x00,0x00,0x0D};           
 unsigned char SET_MINOR[7] = {0x41,0x54,0xFF,0xF3,0x00,0x00,0x0D};
 unsigned char SET_MEASURED_POWER[6] = {0x41,0x54,0xFF,0xF4,0x00,0x0D};
@@ -66,7 +68,7 @@
     Temp_Pos = 0x02;
     if((Command_Received[0] == SET_BEACON_UUID_CMD0) && (Command_Received[1] == SET_BEACON_UUID_CMD1))   //Check if command is receievd for setting UUID
     {
-        DEBUG_UART2.printf("Setting UUID");
+        //DEBUG_UART2.printf("Setting UUID");
         Data_Length = 16;
         End_Position = (Start_Position + Data_Length);
         for(;Start_Position < End_Position;Start_Position++)
@@ -77,8 +79,24 @@
             
             
         }
+        //DEBUG_UART2.printf("UUID Set");
         Change_Beacon_Parameter(SET_VIRTUAL_PACKET_UUID1);
-        DEBUG_UART2.printf("UUID Set");
+    }
+    else if((Command_Received[0] == 0x12) && (Command_Received[1] == 0x21))   //Check if command is receievd for setting UUID
+    {
+        DEBUG_UART2.printf("Setting UUID2");
+        Data_Length = 16;
+        End_Position = (Start_Position + Data_Length);
+        for(;Start_Position < End_Position;Start_Position++)
+        {
+            SET_UUID[Start_Position] = Command_Received[Temp_Pos++];
+            //DEBUG_UART2.putc(SET_UUID[Start_Position]);
+            //DEBUG_UART2.printf("%s",SET_UUID);
+            
+            
+        }
+        DEBUG_UART2.printf("UUID2 Set");
+        Change_Beacon_Parameter(SET_VIRTUAL_PACKET_UUID3);
     }
     else if((Command_Received[0] == SET_SET_MAJOR_CMD0) && (Command_Received[1] == SET_SET_MAJOR_CMD1))  //Check if command is received for Setting Major
     {
@@ -148,22 +166,29 @@
     }   
     else if((Command_Received[0] == SET_SOFT_REBOOT_CMD0) && (Command_Received[1] == SET_SOFT_REBOOT_CMD1))  //Check if command is received for Stopping beacon and go to sleep mode
     {
-        DEBUG_UART2.printf("%s",SOFT_REBOOT);
         Beacon_Module_UART.printf("%s",SOFT_REBOOT2);     //Soft Reboot Beacon Module
-         DEBUG_UART2.printf("Beacon Device Resetted");
+         DEBUG_UART2.printf("Beacon Device Resetted %s",SOFT_REBOOT2);
     }
 }  
     
 void Change_Beacon_Parameter(unsigned char* Beacon_Parameter_To_Set)
 {
+    uint8 i;
+    for(i = 0;i<21;i++)
+    {
+        Beacon_Module_UART.putc(Beacon_Parameter_To_Set[i]);    
+        //DEBUG_UART2.putc(Beacon_Parameter_To_Set[i]);    
+    }
+    //Beacon_Module_UART.printf('%x',0x0d);    
+    //DEBUG_UART2.putc('%x',0x0d);        
     Beacon_Module_UART.printf("%s",Beacon_Parameter_To_Set);    
-    Beacon_Module_UART.printf("%s",SOFT_REBOOT);     //Every Ibeacon command must be followed by Soft reset command in order to make the changes take place instantly
-     DEBUG_UART2.printf("%s",Beacon_Parameter_To_Set);
+    //Beacon_Module_UART.printf("%s",SOFT_REBOOT);     //Every Ibeacon command must be followed by Soft reset command in order to make the changes take place instantly
+     //DEBUG_UART2.printf("%s",Beacon_Parameter_To_Set);
 }
 
 void Initialize_Beacon_Module(void)
 {
-    Beacon_Module_UART.baud(9600);
+    Beacon_Module_UART.baud(9600);  //set Beacon transmitter uart baud rate to default 9600
     Read_Beacon_Module_MAC_ID();
 }