kumar singh
BLE Transmitter not working
Fork of
Dealer_23Feb
by 
kumar singh
Diff: Lora.cpp
- Revision:
- 20:f812f85cf97e
- Parent:
- 19:886d50ecc718
- Child:
- 21:a5fb0ae94dc6
--- a/Lora.cpp Tue Feb 21 06:27:13 2017 +0000
+++ b/Lora.cpp Tue Feb 21 13:33:29 2017 +0000
@@ -85,7 +85,11 @@
Get_Lora_Response();
pc2.printf("Network Id response received");
- LORA_Module_UART.printf("AT+TXDR=DR2\r");
+ LORA_Module_UART.printf("AT+TXDR\r");
+ AT_Response_Receive_Status = FAILURE;
+ while(AT_Response_Receive_Status)
+ Get_Lora_Response();
+ LORA_Module_UART.printf("AT+TXDR=DR3\r");
AT_Response_Receive_Status = FAILURE;
while(AT_Response_Receive_Status)
Get_Lora_Response();
@@ -93,7 +97,7 @@
AT_Response_Receive_Status = FAILURE;
while(AT_Response_Receive_Status)
Get_Lora_Response();
- LORA_Module_UART.printf("AT+ADR=1\r"); //Enable adaptive data rate
+ LORA_Module_UART.printf("AT+ADR=0\r"); //Enable adaptive data rate
AT_Response_Receive_Status = FAILURE;
while(AT_Response_Receive_Status)
Get_Lora_Response();
@@ -101,6 +105,11 @@
AT_Response_Receive_Status = FAILURE;
while(AT_Response_Receive_Status)
Get_Lora_Response();
+ LORA_Module_UART.printf("AT+TXDR\r");
+ AT_Response_Receive_Status = FAILURE;
+ while(AT_Response_Receive_Status)
+ Get_Lora_Response();
+
pc2.printf("Configuration saved");
LORA_Module_UART.printf("%s",Reset_Device); //reset device
wait_ms(3500);
@@ -234,6 +243,14 @@
{
//write code to read obd data,temperature,beacon data
uint8 Pos = 0,i;
+ Lora_Packet_To_Send[Pos++] = 0x41;//Heart_Beat_Lora_Packet.Header; //Header of Lora Packet,0xFE
+ Lora_Packet_To_Send[Pos++] = 0x54;//Misc_Packet_Data.Protocol_Version;
+ Lora_Packet_To_Send[Pos++] = 0x2b;//Heart_Beat_Lora_Packet.Packet_Type; //MSB of Motion Packet Type
+ Lora_Packet_To_Send[Pos++] = 0x53;//(Misc_Packet_Data.OBD_Battery_Voltage >> 8); //Get OBD_Battery Voltage
+ Lora_Packet_To_Send[Pos++] = 0x45;//(Misc_Packet_Data.OBD_Battery_Voltage & 0xFF); //Get OBD_Battery Voltage
+ Lora_Packet_To_Send[Pos++] = 0x4e;//(Misc_Packet_Data.Car_Battery_Voltage >> 8); //Get Vehicle_Battery Temperature
+ Lora_Packet_To_Send[Pos++] = 0x44;//(Misc_Packet_Data.Car_Battery_Voltage & 0xFF); //Get Vehicle_Battery Temperature
+ Lora_Packet_To_Send[Pos++] = 0x20;//Vehicle_Status_Lora_Packet.Header; //Header of Lora Packet,0xFE
Lora_Packet_To_Send[Pos++] = Heart_Beat_Lora_Packet.Header; //Header of Lora Packet,0xFE
Lora_Packet_To_Send[Pos++] = Misc_Packet_Data.Protocol_Version;
Lora_Packet_To_Send[Pos++] = Heart_Beat_Lora_Packet.Packet_Type; //MSB of Motion Packet Type
@@ -251,8 +268,8 @@
Lora_Packet_To_Send[Pos++] = Fixed_Beacon_Packet.Parking2_Beacon_Signal_Strength; //Get Signal Strength of 2nd nearby Beacon Device
for(i=0;i<6;i++)
Lora_Packet_To_Send[Pos++] = Fixed_Beacon_Packet.Parking3_Beacon_ID[i]; //Get Beacon_ID of 3rd nearby Beacon Device
- Lora_Packet_To_Send[Pos++] = Fixed_Beacon_Packet.Parking3_Beacon_Signal_Strength; //Get Signal Strength of 3rd nearby Beacon Device
- Lora_Packet_To_Send[Pos++] = Calculate_Lora_Frame_FCS(Lora_Packet_To_Send,Pos); //Calculate FCS of all bytes
+ Lora_Packet_To_Send[Pos++] = 0x04;//Fixed_Beacon_Packet.Parking3_Beacon_Signal_Strength; //Get Signal Strength of 3rd nearby Beacon Device
+ Lora_Packet_To_Send[Pos++] = 0x05;//Calculate_Lora_Frame_FCS(Lora_Packet_To_Send,Pos); //Calculate FCS of all bytes
Packet_Type_To_Send = HEARTBEAT_TYPE_PACKET;
Send_Lora_Packet_To_Gateway(Lora_Packet_To_Send,Pos);
}
@@ -262,6 +279,21 @@
{
//write code to read OBD data,temperature,beacon data
uint8 Pos = 0,i;
+ Lora_Packet_To_Send[Pos++] = 0x41;//Heart_Beat_Lora_Packet.Header; //Header of Lora Packet,0xFE
+ Lora_Packet_To_Send[Pos++] = 0x54;//Misc_Packet_Data.Protocol_Version;
+ Lora_Packet_To_Send[Pos++] = 0x2b;//Heart_Beat_Lora_Packet.Packet_Type; //MSB of Motion Packet Type
+ Lora_Packet_To_Send[Pos++] = 0x53;//(Misc_Packet_Data.OBD_Battery_Voltage >> 8); //Get OBD_Battery Voltage
+ Lora_Packet_To_Send[Pos++] = 0x45;//(Misc_Packet_Data.OBD_Battery_Voltage & 0xFF); //Get OBD_Battery Voltage
+ Lora_Packet_To_Send[Pos++] = 0x4e;//(Misc_Packet_Data.Car_Battery_Voltage >> 8); //Get Vehicle_Battery Temperature
+ Lora_Packet_To_Send[Pos++] = 0x44;//(Misc_Packet_Data.Car_Battery_Voltage & 0xFF); //Get Vehicle_Battery Temperature
+ Lora_Packet_To_Send[Pos++] = 0x20;//Vehicle_Status_Lora_Packet.Header; //Header of Lora Packet,0xFE
+ Lora_Packet_To_Send[Pos++] = Heart_Beat_Lora_Packet.Header; //Header of Lora Packet,0xFE
+ Lora_Packet_To_Send[Pos++] = Misc_Packet_Data.Protocol_Version;
+ Lora_Packet_To_Send[Pos++] = Vehicle_Status_Lora_Packet.Packet_Type; //MSB of Motion Packet Type
+ Lora_Packet_To_Send[Pos++] = (Misc_Packet_Data.OBD_Battery_Voltage >> 8); //Get OBD_Battery Voltage
+ Lora_Packet_To_Send[Pos++] = (Misc_Packet_Data.OBD_Battery_Voltage & 0xFF); //Get OBD_Battery Voltage
+ Lora_Packet_To_Send[Pos++] = (Misc_Packet_Data.Car_Battery_Voltage >> 8); //Get Vehicle_Battery Temperature
+ Lora_Packet_To_Send[Pos++] = (Misc_Packet_Data.Car_Battery_Voltage & 0xFF); //Get Vehicle_Battery Temperature
Lora_Packet_To_Send[Pos++] = Vehicle_Status_Lora_Packet.Header; //Header of Lora Packet,0xFE
Lora_Packet_To_Send[Pos++] = Misc_Packet_Data.Protocol_Version; //MSB of Motion Packet Type
Lora_Packet_To_Send[Pos++] = Vehicle_Status_Lora_Packet.Packet_Type; //MSB of Motion Packet Type
@@ -281,7 +313,7 @@
Lora_Packet_To_Send[Pos++] = Vehicle_Status_Lora_Packet.BLE_Adv_Beacon_ID[i]; //Get Beacon_ID of 1st nearby Beacon Device
for(i=0;i<6;i++)
Lora_Packet_To_Send[Pos++] = Fixed_Beacon_Packet.Parking1_Beacon_ID[i]; //Get Beacon_ID of 1st nearby Beacon Device
- Lora_Packet_To_Send[Pos++] = Fixed_Beacon_Packet.Parking1_Beacon_Signal_Strength; //Get Signal Strength of 1st nearby Beacon Device
+ /*Lora_Packet_To_Send[Pos++] = Fixed_Beacon_Packet.Parking1_Beacon_Signal_Strength; //Get Signal Strength of 1st nearby Beacon Device
for(i=0;i<6;i++)
Lora_Packet_To_Send[Pos++] = Fixed_Beacon_Packet.Parking2_Beacon_ID[i]; //Get Beacon_ID of 2nd nearby Beacon Device
Lora_Packet_To_Send[Pos++] = Fixed_Beacon_Packet.Parking2_Beacon_Signal_Strength; //Get Signal Strength of 2nd nearby Beacon Device
@@ -296,8 +328,8 @@
Lora_Packet_To_Send[Pos++] = Near_Car_Beacon_Packet.Near_Car2_Beacon_Signal_Strength; //Get Signal Strength of 2nd nearby Beacon Device
for(i=0;i<6;i++)
Lora_Packet_To_Send[Pos++] = Near_Car_Beacon_Packet.Near_Car3_Beacon_ID[i]; //Get Beacon_ID of 3rd nearby Beacon Device
- Lora_Packet_To_Send[Pos++] = Near_Car_Beacon_Packet.Near_Car3_Beacon_Signal_Strength; //Get Signal Strength of 3rd nearby Beacon Device
- Lora_Packet_To_Send[Pos++] = Calculate_Lora_Frame_FCS(Lora_Packet_To_Send,Pos); //Calculate FCS of all bytes
+ */Lora_Packet_To_Send[Pos++] = 0x06;//Near_Car_Beacon_Packet.Near_Car3_Beacon_Signal_Strength; //Get Signal Strength of 3rd nearby Beacon Device
+ Lora_Packet_To_Send[Pos++] = 0x04;//Calculate_Lora_Frame_FCS(Lora_Packet_To_Send,Pos); //Calculate FCS of all bytes
Send_Lora_Packet_To_Gateway(Lora_Packet_To_Send,Pos);
}
@@ -461,9 +493,27 @@
void Send_Lora_Packet_To_Gateway(uint8* Command_To_Send,uint8 Length)
{
uint8 i=0;
- LORA_Module_UART.printf("%s",Send_Lora_Packet);//write to serial port for sending through lora module
- LORA_Module_UART.printf("%s",Command_To_Send);
+ //pc2.printf("Sending data");
+ // LORA_Module_UART.printf("%s",Send_Lora_Packet);//write to serial port for sending through lora module
+ /*for(i=0; i < 7; i++)
+ {
+ LORA_Module_UART.putc(Send_Lora_Packet[i]);
+
+ }*/
+ for(i=0; i < Length; i++)
+ {
+ LORA_Module_UART.putc(Command_To_Send[i]);
+ pc2.putc(Command_To_Send[i]);
+ }
+ for(i=0; i < Length; i++)
+ {
+ pc2.putc(Command_To_Send[i]);
+
+ }
+
+ // LORA_Module_UART.printf("%s",Command_To_Send);
LORA_Module_UART.printf("\r");
+ pc2.printf("Total Bytes %d",Length);
}