Diff: TARGET_MCU_NRF51822/sdk/source/softdevice/s130/headers/nrf_mbr.h

Revision:

640:c90ae1400bf2

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MCU_NRF51822/sdk/source/softdevice/s130/headers/nrf_mbr.h	Wed Sep 14 14:39:43 2016 +0100
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ *   1. Redistributions of source code must retain the above copyright notice, this
+ *   list of conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of other
+ *   contributors to this software may be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+/**
+  @defgroup nrf_mbr_api Master Boot Record API
+  @{
+
+  @brief APIs for updating SoftDevice and BootLoader
+
+*/
+
+/* Header guard */
+#ifndef NRF_MBR_H__
+#define NRF_MBR_H__
+
+#include "nrf_svc.h"
+#include <stdint.h>
+
+
+/** @addtogroup NRF_MBR_DEFINES Defines
+ * @{ */
+
+/**@brief MBR SVC Base number. */
+#define MBR_SVC_BASE        (0x18)
+
+/**@brief Page size in words. */
+#define PAGE_SIZE_IN_WORDS 256
+/** @} */
+
+/** @addtogroup NRF_MBR_ENUMS Enumerations
+ * @{ */
+
+/**@brief nRF Master Boot Record API SVC numbers. */
+enum NRF_MBR_SVCS
+{
+  SD_MBR_COMMAND = MBR_SVC_BASE, /**< ::sd_mbr_command */
+};
+
+/**@brief Possible values for ::sd_mbr_command_t.command */
+enum NRF_MBR_COMMANDS
+{
+  SD_MBR_COMMAND_COPY_BL,               /**< Copy a new BootLoader. @see sd_mbr_command_copy_bl_t */
+  SD_MBR_COMMAND_COPY_SD,               /**< Copy a new SoftDevice. @see ::sd_mbr_command_copy_sd_t*/
+  SD_MBR_COMMAND_INIT_SD,               /**< Init forwarding interrupts to SD, and run reset function in SD*/
+  SD_MBR_COMMAND_COMPARE,               /**< This command works like memcmp. @see ::sd_mbr_command_compare_t*/
+  SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET, /**< Start forwarding all exception to this address @see ::sd_mbr_command_vector_table_base_set_t*/
+};
+
+/** @} */
+
+/** @addtogroup NRF_MBR_TYPES Types
+ * @{ */
+
+/**@brief This command copies part of a new SoftDevice
+ * The destination area is erased before copying.
+ * If dst is in the middle of a flash page, that whole flash page will be erased.
+ * If (dst+len) is in the middle of a flash page, that whole flash page will be erased.
+ *
+ * The user of this function is responsible for setting the PROTENSET registers.
+ *
+ * @retval ::NRF_SUCCESS indicates that the contents of the memory blocks where copied correctly.
+ * @retval ::NRF_ERROR_INTERNAL indicates that the contents of the memory blocks where not verified correctly after copying.
+ */
+typedef struct
+{
+  uint32_t *src;  /**< Pointer to the source of data to be copied.*/
+  uint32_t *dst;  /**< Pointer to the destination where the content is to be copied.*/
+  uint32_t len;   /**< Number of 32 bit words to copy. Must be a multiple of @ref PAGE_SIZE_IN_WORDS words.*/
+} sd_mbr_command_copy_sd_t;
+
+
+/**@brief This command works like memcmp, but takes the length in words.
+ *
+ * @retval ::NRF_SUCCESS indicates that the contents of both memory blocks are equal.
+ * @retval ::NRF_ERROR_NULL indicates that the contents of the memory blocks are not equal.
+ */
+typedef struct
+{
+  uint32_t *ptr1; /**< Pointer to block of memory. */
+  uint32_t *ptr2; /**< Pointer to block of memory. */
+  uint32_t len;   /**< Number of 32 bit words to compare.*/
+} sd_mbr_command_compare_t;
+
+
+/**@brief This command copies a new BootLoader.
+ *  With this command, destination of BootLoader is always the address written in NRF_UICR->BOOTADDR.
+ *
+ *  Destination is erased by this function.
+ *  If (destination+bl_len) is in the middle of a flash page, that whole flash page will be erased.
+ *
+ *  This function will use PROTENSET to protect the flash that is not intended to be written.
+ *
+ *  On Success, this function will not return. It will start the new BootLoader from reset-vector as normal.
+ *
+ * @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen.
+ * @retval ::NRF_ERROR_FORBIDDEN if NRF_UICR->BOOTADDR is not set.
+ * @retval ::NRF_ERROR_INVALID_LENGTH if parameters attempts to read or write outside flash area.
+ */
+typedef struct
+{
+  uint32_t *bl_src;  /**< Pointer to the source of the Bootloader to be be copied.*/
+  uint32_t bl_len;   /**< Number of 32 bit words to copy for BootLoader. */
+} sd_mbr_command_copy_bl_t;
+
+/**@brief Sets the base address of the interrupt vector table for interrupts forwarded from the MBR
+ *
+ * Once this function has been called, this address is where the MBR will start to forward interrupts to after a reset.
+ *
+ * To restore default forwarding this function should be called with @param address set to 0.
+ * The MBR will then start forwarding to interrupts to the address in NFR_UICR->BOOTADDR or to the SoftDevice if the BOOTADDR is not set.
+ *
+ * @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen.
+ * @retval ::NRF_ERROR_INVALID_ADDR if parameter address is outside of the flash size.
+ */
+typedef struct
+{
+  uint32_t address; /**< The base address of the interrupt vector table for forwarded interrupts.*/
+} sd_mbr_command_vector_table_base_set_t;
+
+typedef struct
+{
+  uint32_t command;  /**< type of command to be issued see @ref NRF_MBR_COMMANDS. */
+  union
+  {
+    sd_mbr_command_copy_sd_t copy_sd;  /**< Parameters for copy SoftDevice.*/
+    sd_mbr_command_copy_bl_t copy_bl;  /**< Parameters for copy BootLoader.*/
+    sd_mbr_command_compare_t compare;  /**< Parameters for verify.*/
+    sd_mbr_command_vector_table_base_set_t base_set; /**< Parameters for vector table base set.*/
+  } params;
+} sd_mbr_command_t;
+
+/** @} */
+
+/** @addtogroup NRF_MBR_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Issue Master Boot Record commands
+ *
+ * Commands used when updating a SoftDevice and bootloader.
+ *
+ * @param[in]  param Pointer to a struct describing the command.
+ *
+ *@note for retvals see ::sd_mbr_command_copy_sd_t ::sd_mbr_command_copy_bl_t ::sd_mbr_command_compare_t
+
+*/
+SVCALL(SD_MBR_COMMAND, uint32_t, sd_mbr_command(sd_mbr_command_t* param));
+
+/** @} */
+#endif // NRF_MBR_H__
+
+/**
+  @}
+*/