![](/media/cache/profiles/TAG-avatar.png.50x50_q85.png)
Code to assist in measuring a battery's Chemical ID.
New releases of this code have moved to GitHub: https://github.com/USCRPL/BQ34Z100G1-Utils
Diff: ChemIDMeasurer.cpp
- Revision:
- 0:246ef70a9e6e
diff -r 000000000000 -r 246ef70a9e6e ChemIDMeasurer.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/ChemIDMeasurer.cpp Sun Feb 07 20:57:24 2021 -0800 @@ -0,0 +1,130 @@ +#include "ChemIDMeasurer.h" +#include <cinttypes> + +namespace mbed +{ + FileHandle *mbed_override_console(int) + { + static BufferedSerial serial(USBTX, USBRX, 115200); + return &serial; + } +} + +ChemIDMeasurer::ChemIDMeasurer(): +soc(I2C_SDA, I2C_SCL, 100000) +{ +} + +void ChemIDMeasurer::activateCharger() +{ + // If you have code to activate the charger, put it here +} + +void ChemIDMeasurer::deactivateCharger() +{ + // If you have code to deactivate the charger, put it here +} + +void ChemIDMeasurer::activateLoad() +{ + // If you have code to activate the dummy load, put it here +} + +void ChemIDMeasurer::deactivateLoad() +{ + // If you have code to deactivate the dummy load, put it here +} + +void ChemIDMeasurer::setState(ChemIDMeasurer::State newState) +{ + state = newState; + stateTimer.reset(); +} + +void ChemIDMeasurer::runMeasurement() +{ + totalTimer.start(); + stateTimer.start(); + + while(state != State::DONE) + { + // read data + uint16_t voltage_mV = soc.getVoltage(); + int32_t current_mA = soc.getCurrent(); + double temperatureC = soc.getTemperature(); + char const * comment = ""; + + // update based on state + switch (state) + { + case State::INIT: + // Print header + printf("Elapsed Time (s), Voltage (mV), Current (mA), Temperature (deg C), SoC (%%), Comments\n"); + setState(State::CHARGE); + activateCharger(); + comment = "Activating charger and entering CHARGE"; + break; + + case State::CHARGE: + // threshold current = C/10 + if(current_mA < DESIGNCAP/10) + { + deactivateCharger(); + setState(State::RELAX_CHARGED); + comment = "Deactivating charger and entering RELAX_CHARGED"; + } + break; + + case State::RELAX_CHARGED: + if(stateTimer.elapsed_time() > 2h) + { + activateLoad(); + setState(State::DISCHARGE); + comment = "Done relaxing and entering discharge -- please disconnect charger and connect C/10 load now."; + } + break; + + case State::DISCHARGE: + // Change states once we hit the termination voltage + if(voltage_mV < ZEROCHARGEVOLT * CELLCOUNT) + { + deactivateLoad(); + setState(State::RELAX_DISCHARGED); + comment = "Done discharging -- please remove C/10 load now."; + } + // BQ34Z100 reports positive current always, but TI's tool expects discharging to + // be negative current. + current_mA *= -1; + break; + + case State::RELAX_DISCHARGED: + if(stateTimer.elapsed_time() > 5h) + { + setState(State::DONE); + comment = "Done!"; + } + break; + + default: + // will never be hit but here to silence warning + break; + } + + + // print data column + printf("%" PRIi64 ", %" PRIi16 ", %" PRIi32 ", %f, %" PRIu8 ", %s\n", + std::chrono::duration_cast<std::chrono::seconds>(totalTimer.elapsed_time()).count(), + voltage_mV, current_mA, temperatureC, soc.getSOC(), comment); + + // wait, update freq is every 5 seconds + ThisThread::sleep_for(5s); + } +} + +ChemIDMeasurer measurer; + +int main() +{ + measurer.runMeasurement(); + return 0; +} \ No newline at end of file