Diff: Acceloro.cpp

Revision:

2:c3e9a24a3ddf

Parent:

1:8359e6982b30

diff -r 8359e6982b30 -r c3e9a24a3ddf Acceloro.cpp
--- a/Acceloro.cpp	Mon May 11 18:27:20 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,110 +0,0 @@
-/**
-@file main.h
-@Header file contains code for displaying acceleration, defines and global variables.
-@Revision 1.0
-@Author Mario Quartey Papafio
-@Date May 2015
-*/
-
-
-#include "mbed.h"
-#include "N5110.h"
-#include "MMA8452.h"
-#include "PowerControl/PowerControl.h"
-#include "PowerControl/EthernetPowerControl.h"
-
-char buffer[14]; // to store array character takes 6 pixels
-char buffer1[14]; 
-char buffer2[14]; 
-char buffer3[14];
-
-DigitalOut led(LED1);
-
-void readings();
-
-PwmOut myled(p22);
-PwmOut buzzer(p21);
-N5110 lcd(p7,p8,p9,p10,p11,p13,p26);
-MMA8452 mma8452(p28,p27);  // SDA, SCL
-Serial serial(USBTX,USBRX);
-AnalogIn pot(p20);
-
-Timeout timer; // create ticker object
-
-int timerFlag = 0; // flag for timer
-
-//Interrupt Service Routine
-void timerExpired() {
-    timerFlag = 1;
-    //led=!led;
-    
-    float x=-(1-pot.read())*44/45+1;
-    timer.detach();
-    timer.attach(&timerExpired,x);
-    
-}
-
-
-
-
-void turnon () {  //Turns on LCD AND Accelerometer.
-     lcd.init();
-     lcd.printString("Mario Quartey", 0,0);
-     lcd.printString("Accelerometer", 0,1);
-     lcd.printString("Elec 2645", 0,2);
-     lcd.printString("Dr C Evans!", 0,3);
-     lcd.refresh();
-     wait(2);
-     lcd.clear();
-     mma8452.init();  // 100 Hz update rate, ±4g scale
-     }
-void readings () {
-     Acceleration acceleration; 
-     lcd.printString("X Y Z Values", 0,0);
-        acceleration = mma8452.readValues();   // read current values and print over serial port
-         int xx = sprintf(buffer, "x = %.2f", acceleration.x); // figure eout the length of chars
-         int yy =  sprintf(buffer1, "y = %.2f", acceleration.y);
-         int zz = sprintf(buffer2, "z = %.2f", acceleration.z);
-          float mag = sqrt((acceleration.x*acceleration.x + acceleration.y*acceleration.y + acceleration.z*acceleration.z));
-          int ff = sprintf(buffer3, "Mag = %.2f", mag);
-        //serial.printf("x = %.2f g y = %.2f g z = %.2f g\n",acceleration.x,acceleration.y,acceleration.z);
-        wait(0.1);   // short delay until next reading
-        if (xx <= 14){  // if the length is smaller than 14 chars. it prints
-            lcd.printString(buffer, 10, 1);
-        if (yy <= 14){  // if the length is smaller than 14 chars. it prints
-            lcd.printString(buffer1, 10, 2);
-        if (zz <= 14){  // if the length is smaller than 14 chars. it prints
-            lcd.printString(buffer2, 10, 3);
-        if (mag <= 14){  // if the length is smaller than 14 chars. it prints
-            lcd.printString(buffer3, 10, 4);   
-            if (mag > 1.5)
-            for(float p = 0.0f; p < 1.0f; p += 0.1f) {
-            buzzer = p;
-            wait (0.3);
-            buzzer = 0;
-        }}}}}}  
-        
-
-int main() {
-   turnon();
-    
-    timer.attach(&timerExpired,1);
-
-PHY_PowerDown(); //Powers Down ethernet
-
-    while (1) {
-       
-        for(float p = 0.0f; p < 1.0f; p += 0.1f) {
-            myled = p;
-
-             }
-       
-         if (timerFlag) {
-            readings ();
-            
-            timerFlag = 0;
-            }
-       lcd.refresh();
-        }
-            
-     }