Diff: microbit/microbit-dal/BLE_API/ble/DiscoveredCharacteristic.h

Revision:

0:b9164b348919

diff -r 000000000000 -r b9164b348919 microbit/microbit-dal/BLE_API/ble/DiscoveredCharacteristic.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/microbit/microbit-dal/BLE_API/ble/DiscoveredCharacteristic.h	Mon Oct 17 12:41:20 2016 +0000
@@ -0,0 +1,329 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __DISCOVERED_CHARACTERISTIC_H__
+#define __DISCOVERED_CHARACTERISTIC_H__
+
+#include "UUID.h"
+#include "Gap.h"
+#include "GattAttribute.h"
+#include "GattClient.h"
+#include "CharacteristicDescriptorDiscovery.h"
+#include "ble/DiscoveredCharacteristicDescriptor.h"
+
+/**
+ * @brief Representation of a characteristic discovered during a GattClient
+ * discovery procedure (see GattClient::launchServiceDiscovery ).
+ *
+ * @detail Provide detailed informations about a discovered characteristic like:
+ *     - Its UUID (see #getUUID).
+ *     - The most important handles of the characteristic definition
+ *       (see #getDeclHandle, #getValueHandle, #getLastHandle )
+ *     - Its properties (see #getProperties).
+ * This class also provide functions to operate on the characteristic:
+ *     - Read the characteristic value (see #read)
+ *     - Writing a characteristic value (see #write or #writeWoResponse)
+ *     - Discover descriptors inside the characteristic definition. These descriptors
+ *       extends the characteristic. More information about descriptor usage is
+ *       available in DiscoveredCharacteristicDescriptor class.
+ */
+class DiscoveredCharacteristic {
+public:
+    struct Properties_t {
+        uint8_t _broadcast       :1; /**< Broadcasting the value permitted. */
+        uint8_t _read            :1; /**< Reading the value permitted. */
+        uint8_t _writeWoResp     :1; /**< Writing the value with Write Command permitted. */
+        uint8_t _write           :1; /**< Writing the value with Write Request permitted. */
+        uint8_t _notify          :1; /**< Notifications of the value permitted. */
+        uint8_t _indicate        :1; /**< Indications of the value permitted. */
+        uint8_t _authSignedWrite :1; /**< Writing the value with Signed Write Command permitted. */
+
+    public:
+        bool broadcast(void)       const {return _broadcast;      }
+        bool read(void)            const {return _read;           }
+        bool writeWoResp(void)     const {return _writeWoResp;    }
+        bool write(void)           const {return _write;          }
+        bool notify(void)          const {return _notify;         }
+        bool indicate(void)        const {return _indicate;       }
+        bool authSignedWrite(void) const {return _authSignedWrite;}
+
+        /**
+         * @brief "Equal to" operator for DiscoveredCharacteristic::Properties_t
+         *
+         * @param lhs[in] The left hand side of the equality expression
+         * @param rhs[in] The right hand side of the equality expression
+         *
+         * @return true if operands are equals, false otherwise.
+         */
+        friend bool operator==(Properties_t lhs, Properties_t rhs) {
+            return lhs._broadcast == rhs._broadcast &&
+                   lhs._read == rhs._read &&
+                   lhs._writeWoResp == rhs._writeWoResp &&
+                   lhs._write == rhs._write &&
+                   lhs._notify == rhs._notify &&
+                   lhs._indicate == rhs._indicate &&
+                   lhs._authSignedWrite == rhs._authSignedWrite;
+        }
+
+        /**
+         * @brief "Not equal to" operator for DiscoveredCharacteristic::Properties_t
+         *
+         * @param lhs The right hand side of the expression
+         * @param rhs The left hand side of the expression
+         *
+         * @return true if operands are not equals, false otherwise.
+         */
+        friend bool operator!=(Properties_t lhs, Properties_t rhs) {
+            return !(lhs == rhs);
+        }
+
+    private:
+        operator uint8_t()  const; /* Disallow implicit conversion into an integer. */
+        operator unsigned() const; /* Disallow implicit conversion into an integer. */
+    };
+
+    /**
+     * Initiate (or continue) a read for the value attribute, optionally at a
+     * given offset. If the characteristic or descriptor to be read is longer
+     * than ATT_MTU - 1, this function must be called multiple times with
+     * appropriate offset to read the complete value.
+     *
+     * @param offset[in] The position - in the characteristic value bytes stream - where
+     * the read operation begin.
+     *
+     * @return BLE_ERROR_NONE if a read has been initiated, or
+     *         BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or
+     *         BLE_STACK_BUSY if some client procedure is already in progress, or
+     *         BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties.
+     */
+    ble_error_t read(uint16_t offset = 0) const;
+
+    /**
+     * @brief Same as #read(uint16_t) const but allow the user to register a callback
+     * which will be fired once the read is done.
+     *
+     * @param offset[in] The position - in the characteristic value bytes stream - where
+     * the read operation begin.
+     * @param onRead[in] Continuation of the read operation
+     */
+    ble_error_t read(uint16_t offset, const GattClient::ReadCallback_t& onRead) const;
+
+    /**
+     * Perform a write without response procedure.
+     *
+     * @param[in]  length
+     *           The amount of data being written.
+     * @param[in]  value
+     *           The bytes being written.
+     *
+     * @note   It is important to note that a write without response will generate
+     *         an onDataSent() callback when the packet has been transmitted. There
+     *         will be a BLE-stack specific limit to the number of pending
+     *         writeWoResponse operations; the user may want to use the onDataSent()
+     *         callback for flow-control.
+     *
+     * @retval BLE_ERROR_NONE Successfully started the Write procedure, or
+     *         BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or
+     *         BLE_STACK_BUSY if some client procedure is already in progress, or
+     *         BLE_ERROR_NO_MEM if there are no available buffers left to process the request, or
+     *         BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties.
+     */
+    ble_error_t writeWoResponse(uint16_t length, const uint8_t *value) const;
+
+    /**
+     * Initiate a GATT Characteristic Descriptor Discovery procedure for descriptors within this characteristic.
+     *
+     * @param[in] onDescriptorDiscovered This callback will be called every time a descriptor is discovered
+     * @param[in] onTermination This callback will be called when the discovery process is over.
+     *
+     * @return BLE_ERROR_NONE if descriptor discovery is launched successfully; else an appropriate error.
+     */
+    ble_error_t discoverDescriptors(const CharacteristicDescriptorDiscovery::DiscoveryCallback_t& onDescriptorDiscovered,
+                                    const CharacteristicDescriptorDiscovery::TerminationCallback_t& onTermination) const;
+
+    /**
+     * Perform a write procedure.
+     *
+     * @param[in]  length
+     *           The amount of data being written.
+     * @param[in]  value
+     *           The bytes being written.
+     *
+     * @note   It is important to note that a write will generate
+     *         an onDataWritten() callback when the peer acknowledges the request.
+     *
+     * @retval BLE_ERROR_NONE Successfully started the Write procedure, or
+     *         BLE_ERROR_INVALID_STATE if some internal state about the connection is invalid, or
+     *         BLE_STACK_BUSY if some client procedure is already in progress, or
+     *         BLE_ERROR_NO_MEM if there are no available buffers left to process the request, or
+     *         BLE_ERROR_OPERATION_NOT_PERMITTED due to the characteristic's properties.
+     */
+    ble_error_t write(uint16_t length, const uint8_t *value) const;
+
+    /**
+     * Same as #write(uint16_t, const uint8_t *) const but register a callback
+     * which will be called once the data has been written.
+     *
+     * @param[in] length The amount of bytes to write.
+     * @param[in] value The bytes to write.
+     * @param[in] onRead Continuation callback for the write operation
+     */
+    ble_error_t write(uint16_t length, const uint8_t *value, const GattClient::WriteCallback_t& onWrite) const;
+
+    void setupLongUUID(UUID::LongUUIDBytes_t longUUID, UUID::ByteOrder_t order = UUID::MSB) {
+        uuid.setupLong(longUUID, order);
+    }
+
+public:
+    /**
+     * @brief Get the UUID of the discovered characteristic
+     * @return the UUID of this characteristic
+     */
+    const UUID& getUUID(void) const {
+        return uuid;
+    }
+
+    /**
+     * @brief Get the properties of this characteristic
+     * @return the set of properties of this characteristic
+     */
+    const Properties_t& getProperties(void) const {
+        return props;
+    }
+
+    /**
+     * @brief Get the declaration handle of this characteristic.
+     * @detail The declaration handle is the first handle of a characteristic
+     * definition. The value accessible at this handle contains the following
+     * informations:
+     *    - The characteristics properties (see Properties_t). This value can
+     *      be accessed by using #getProperties .
+     *    - The characteristic value attribute handle. This field can be accessed
+     *      by using #getValueHandle .
+     *    - The characteristic UUID, this value can be accessed by using the
+     *      function #getUUID .
+     * @return the declaration handle of this characteristic.
+     */
+    GattAttribute::Handle_t getDeclHandle(void) const {
+        return declHandle;
+    }
+
+    /**
+     * @brief Return the handle used to access the value of this characteristic.
+     * @details This handle is the one provided in the characteristic declaration
+     * value. Usually, it is equal to #getDeclHandle() + 1. But it is not always
+     * the case. Anyway, users are allowed to use #getDeclHandle() + 1 to access
+     * the value of a characteristic.
+     * @return The handle to access the value of this characteristic.
+     */
+    GattAttribute::Handle_t getValueHandle(void) const {
+        return valueHandle;
+    }
+
+    /**
+     * @brief Return the last handle of the characteristic definition.
+     * @details A Characteristic definition can contain a lot of handles:
+     *     - one for the declaration (see #getDeclHandle)
+     *     - one for the value (see #getValueHandle)
+     *     - zero of more for the characteristic descriptors.
+     * This handle is the last handle of the characteristic definition.
+     * @return The last handle of this characteristic definition.
+     */
+    GattAttribute::Handle_t getLastHandle(void) const {
+        return lastHandle;
+    }
+
+    /**
+     * @brief Return the GattClient which can operate on this characteristic.
+     * @return The GattClient which can operate on this characteristic.
+     */
+    GattClient* getGattClient() {
+        return gattc;
+    }
+
+    /**
+     * @brief Return the GattClient which can operate on this characteristic.
+     * @return The GattClient which can operate on this characteristic.
+     */
+    const GattClient* getGattClient() const {
+        return gattc;
+    }
+
+    /**
+     * @brief Return the connection handle to the GattServer which contain
+     * this characteristic.
+     * @return the connection handle to the GattServer which contain
+     * this characteristic.
+     */
+    Gap::Handle_t getConnectionHandle() const {
+        return connHandle;
+    }
+
+    /**
+     * @brief "Equal to" operator for DiscoveredCharacteristic
+     *
+     * @param lhs[in] The left hand side of the equality expression
+     * @param rhs[in] The right hand side of the equality expression
+     *
+     * @return true if operands are equals, false otherwise.
+     */
+    friend bool operator==(const DiscoveredCharacteristic& lhs, const DiscoveredCharacteristic& rhs) {
+        return lhs.gattc == rhs.gattc &&
+               lhs.uuid == rhs.uuid &&
+               lhs.props == rhs.props &&
+               lhs.declHandle == rhs.declHandle &&
+               lhs.valueHandle == rhs.valueHandle &&
+               lhs.lastHandle == rhs.lastHandle &&
+               lhs.connHandle == rhs.connHandle;
+    }
+
+    /**
+     * @brief "Not equal to" operator for DiscoveredCharacteristic
+     *
+     * @param lhs[in] The right hand side of the expression
+     * @param rhs[in] The left hand side of the expression
+     *
+     * @return true if operands are not equals, false otherwise.
+     */
+    friend bool operator !=(const DiscoveredCharacteristic& lhs, const DiscoveredCharacteristic& rhs) {
+        return !(lhs == rhs);
+    }
+
+public:
+    DiscoveredCharacteristic() : gattc(NULL),
+                                 uuid(UUID::ShortUUIDBytes_t(0)),
+                                 props(),
+                                 declHandle(GattAttribute::INVALID_HANDLE),
+                                 valueHandle(GattAttribute::INVALID_HANDLE),
+                                 lastHandle(GattAttribute::INVALID_HANDLE),
+                                 connHandle() {
+        /* empty */
+    }
+
+protected:
+    GattClient              *gattc;
+
+protected:
+    UUID                     uuid;
+    Properties_t             props;
+    GattAttribute::Handle_t  declHandle;
+    GattAttribute::Handle_t  valueHandle;
+    GattAttribute::Handle_t  lastHandle;
+
+    Gap::Handle_t            connHandle;
+};
+
+#endif /*__DISCOVERED_CHARACTERISTIC_H__*/
\ No newline at end of file