Diff: microbit/microbit-dal/BLE_API/ble/blecommon.h

Revision:

0:b9164b348919

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/microbit/microbit-dal/BLE_API/ble/blecommon.h	Mon Oct 17 12:41:20 2016 +0000
@@ -0,0 +1,81 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __BLE_COMMON_H__
+#define __BLE_COMMON_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/*! @brief Assigned values for BLE UUIDs. */
+enum {
+    BLE_UUID_UNKNOWN                             = 0x0000, /**< Reserved UUID. */
+    BLE_UUID_SERVICE_PRIMARY                     = 0x2800, /**< Primary Service. */
+    BLE_UUID_SERVICE_SECONDARY                   = 0x2801, /**< Secondary Service. */
+    BLE_UUID_SERVICE_INCLUDE                     = 0x2802, /**< Include. */
+    BLE_UUID_CHARACTERISTIC                      = 0x2803, /**< Characteristic. */
+    BLE_UUID_DESCRIPTOR_CHAR_EXT_PROP            = 0x2900, /**< Characteristic Extended Properties Descriptor. */
+    BLE_UUID_DESCRIPTOR_CHAR_USER_DESC           = 0x2901, /**< Characteristic User Description Descriptor. */
+    BLE_UUID_DESCRIPTOR_CLIENT_CHAR_CONFIG       = 0x2902, /**< Client Characteristic Configuration Descriptor. */
+    BLE_UUID_DESCRIPTOR_SERVER_CHAR_CONFIG       = 0x2903, /**< Server Characteristic Configuration Descriptor. */
+    BLE_UUID_DESCRIPTOR_CHAR_PRESENTATION_FORMAT = 0x2904, /**< Characteristic Presentation Format Descriptor. */
+    BLE_UUID_DESCRIPTOR_CHAR_AGGREGATE_FORMAT    = 0x2905, /**< Characteristic Aggregate Format Descriptor. */
+
+/* GATT specific UUIDs */
+    BLE_UUID_GATT                                = 0x1801, /**< Generic Attribute Profile. */
+    BLE_UUID_GATT_CHARACTERISTIC_SERVICE_CHANGED = 0x2A05, /**< Service Changed Characteristic. */
+
+/* GAP specific UUIDs */
+    BLE_UUID_GAP                                 = 0x1800, /**< Generic Access Profile. */
+    BLE_UUID_GAP_CHARACTERISTIC_DEVICE_NAME      = 0x2A00, /**< Device Name Characteristic. */
+    BLE_UUID_GAP_CHARACTERISTIC_APPEARANCE       = 0x2A01, /**< Appearance Characteristic. */
+    BLE_UUID_GAP_CHARACTERISTIC_PPF              = 0x2A02, /**< Peripheral Privacy Flag Characteristic. */
+    BLE_UUID_GAP_CHARACTERISTIC_RECONN_ADDR      = 0x2A03, /**< Reconnection Address Characteristic. */
+    BLE_UUID_GAP_CHARACTERISTIC_PPCP             = 0x2A04, /**< Peripheral Preferred Connection Parameters Characteristic. */
+};
+
+/*! @brief Error codes for the BLE API. */
+enum ble_error_t {
+    BLE_ERROR_NONE                      = 0, /**< No error. */
+    BLE_ERROR_BUFFER_OVERFLOW           = 1, /**< The requested action would cause a buffer overflow and has been aborted. */
+    BLE_ERROR_NOT_IMPLEMENTED           = 2, /**< Requested a feature that isn't yet implemented or isn't supported by the target HW. */
+    BLE_ERROR_PARAM_OUT_OF_RANGE        = 3, /**< One of the supplied parameters is outside the valid range. */
+    BLE_ERROR_INVALID_PARAM             = 4, /**< One of the supplied parameters is invalid. */
+    BLE_STACK_BUSY                      = 5, /**< The stack is busy. */
+    BLE_ERROR_INVALID_STATE             = 6, /**< Invalid state. */
+    BLE_ERROR_NO_MEM                    = 7, /**< Out of memory */
+    BLE_ERROR_OPERATION_NOT_PERMITTED   = 8,
+    BLE_ERROR_INITIALIZATION_INCOMPLETE = 9,
+    BLE_ERROR_ALREADY_INITIALIZED       = 10,
+    BLE_ERROR_UNSPECIFIED               = 11, /**< Unknown error. */
+    BLE_ERROR_INTERNAL_STACK_FAILURE    = 12, /**< The platform-specific stack failed */
+};
+
+/** @brief Default MTU size. */
+static const unsigned BLE_GATT_MTU_SIZE_DEFAULT = 23;
+
+enum HVXType_t {
+    BLE_HVX_NOTIFICATION = 0x01,  /**< Handle Value Notification. */
+    BLE_HVX_INDICATION   = 0x02,  /**< Handle Value Indication. */
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // ifndef __BLE_COMMON_H__
\ No newline at end of file