Mirjam Bos
Projectgroep 12. Code die gebruikt wordt voor het filteren van een EMG signaal
Dependencies: Biquad HIDScope biquadFilter mbed BiQuad4th_order
History
Filtering the EMG
2018-10-29, by Mirjam [Mon, 29 Oct 2018 13:49:25 +0000] rev 10
Filtering the EMG
renamed threshold to threshold_EMG
2018-10-29, by Mirjam [Mon, 29 Oct 2018 13:12:31 +0000] rev 9
renamed threshold to threshold_EMG
Changes tickername to sample_EMGtoHIDscope
2018-10-29, by Mirjam [Mon, 29 Oct 2018 13:10:28 +0000] rev 8
Changes tickername to sample_EMGtoHIDscope
Threshold added for switching on the motors. Output need_to_move_1 and need_to_move_2
2018-10-22, by Mirjam [Mon, 22 Oct 2018 13:42:23 +0000] rev 7
Threshold added for switching on the motors. Output need_to_move_1 and need_to_move_2
Working filters for two EMG signals with hidscope and LED output
2018-10-22, by Mirjam [Mon, 22 Oct 2018 12:29:31 +0000] rev 6
Working filters for two EMG signals with hidscope and LED output
Added 2nd EMG. (Can not compile)
2018-10-22, by Mirjam [Mon, 22 Oct 2018 09:49:25 +0000] rev 5
Added 2nd EMG. (Can not compile)
Working filter with Notch 50 Hz, High pass 10Hz (butter), Low pass 9Hz (butter), gain = 10
2018-10-22, by Mirjam [Mon, 22 Oct 2018 09:37:43 +0000] rev 4
Working filter with Notch 50 Hz, High pass 10Hz (butter), Low pass 9Hz (butter), gain = 10
4th order Butterworth filter added. Not working properly yet
2018-10-22, by Mirjam [Mon, 22 Oct 2018 09:11:46 +0000] rev 3
4th order Butterworth filter added. Not working properly yet
Totaal met vier filters (notch op 50 Hz, highpass 10 Hz, abs() en lowpass 1.5Hz)
2018-10-19, by Mirjam [Fri, 19 Oct 2018 14:49:54 +0000] rev 2
Totaal met vier filters (notch op 50 Hz, highpass 10 Hz, abs() en lowpass 1.5Hz)
High pass only
2018-10-19, by Mirjam [Fri, 19 Oct 2018 11:26:00 +0000] rev 1
High pass only