Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependents: WizFi250_AP_HelloWorld
Fork of mbed-src by
Diff: targets/hal/TARGET_Freescale/TARGET_K20XX/rtc.api.c
- Revision:
- 445:3312ed629f01
- Child:
- 489:119543c9f674
diff -r d80869345ae6 -r 3312ed629f01 targets/hal/TARGET_Freescale/TARGET_K20XX/rtc.api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_Freescale/TARGET_K20XX/rtc.api.c Thu Jan 15 19:30:07 2015 +0000
@@ -0,0 +1,85 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "rtc_api.h"
+
+static void init(void) {
+ // enable PORTC clock
+ SIM->SCGC5 |= SIM_SCGC5_PORTC_MASK;
+
+ // enable RTC clock
+ SIM->SCGC6 |= SIM_SCGC6_RTC_MASK;
+
+ // OSC32 as source
+ SIM->SOPT1 &= ~SIM_SOPT1_OSC32KSEL_MASK;
+ SIM->SOPT1 |= SIM_SOPT1_OSC32KSEL(0);
+}
+
+void rtc_init(void) {
+ init();
+
+ // Enable the oscillator
+ RTC->CR |= RTC_CR_OSCE_MASK;
+
+ //Configure the TSR. default value: 1
+ RTC->TSR = 1;
+
+ // enable counter
+ RTC->SR |= RTC_SR_TCE_MASK;
+}
+
+void rtc_free(void) {
+ // [TODO]
+}
+
+/*
+ * Little check routine to see if the RTC has been enabled
+ * 0 = Disabled, 1 = Enabled
+ */
+int rtc_isenabled(void) {
+ // even if the RTC module is enabled,
+ // as we use RTC_CLKIN and an external clock,
+ // we need to reconfigure the pins. That is why we
+ // call init() if the rtc is enabled
+
+ // if RTC not enabled return 0
+ SIM->SCGC5 |= SIM_SCGC5_PORTC_MASK;
+ SIM->SCGC6 |= SIM_SCGC6_RTC_MASK;
+ if ((RTC->SR & RTC_SR_TCE_MASK) == 0)
+ return 0;
+
+ init();
+ return 1;
+}
+
+time_t rtc_read(void) {
+ return RTC->TSR;
+}
+
+void rtc_write(time_t t) {
+ // disable counter
+ RTC->SR &= ~RTC_SR_TCE_MASK;
+
+ // we do not write 0 into TSR
+ // to avoid invalid time
+ if (t == 0)
+ t = 1;
+
+ // write seconds
+ RTC->TSR = t;
+
+ // re-enable counter
+ RTC->SR |= RTC_SR_TCE_MASK;
+}
