File content as of revision 10:3bc89ef62ce7:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "analogin_api.h"
#include "cmsis.h"
#include "pinmap.h"
#include "error.h"

#define ANALOGIN_MEDIAN_FILTER      1

#define ADC_10BIT_RANGE             0x3FF
#define ADC_12BIT_RANGE             0xFFF

static inline int div_round_up(int x, int y) {
  return (x + (y - 1)) / y;
}

static const PinMap PinMap_ADC[] = {
    {P0_23, ADC0_0, 1},
    {P0_24, ADC0_1, 1},
    {P0_25, ADC0_2, 1},
    {P0_26, ADC0_3, 1},
    {P1_30, ADC0_4, 3},
    {P1_31, ADC0_5, 3},
    {NC,    NC,     0}
};

#define ADC_RANGE    ADC_10BIT_RANGE


void analogin_init(analogin_t *obj, PinName pin) {
    obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
    if (obj->adc == (uint32_t)NC) {
        error("ADC pin mapping failed");
    }
    
    // ensure power is turned on
    LPC_SC->PCONP |= (1 << 12);
    
    // set PCLK of ADC to /1
    LPC_SC->PCLKSEL0 &= ~(0x3 << 24);
    LPC_SC->PCLKSEL0 |= (0x1 << 24);
    uint32_t PCLK = SystemCoreClock;
    
    // calculate minimum clock divider
    //  clkdiv = divider - 1
    uint32_t MAX_ADC_CLK = 13000000;
    uint32_t clkdiv = div_round_up(PCLK, MAX_ADC_CLK) - 1;
    
    // Set the generic software-controlled ADC settings
    LPC_ADC->ADCR = (0 << 0)      // SEL: 0 = no channels selected
                  | (clkdiv << 8) // CLKDIV: PCLK max ~= 25MHz, /25 to give safe 1MHz at fastest
                  | (0 << 16)     // BURST: 0 = software control
                  | (0 << 17)     // CLKS: not applicable
                  | (1 << 21)     // PDN: 1 = operational
                  | (0 << 24)     // START: 0 = no start
                  | (0 << 27);    // EDGE: not applicable
    
    pinmap_pinout(pin, PinMap_ADC);
}

static inline uint32_t adc_read(analogin_t *obj) {
    // Select the appropriate channel and start conversion
    LPC_ADC->ADCR &= ~0xFF;
    LPC_ADC->ADCR |= 1 << (int)obj->adc;
    LPC_ADC->ADCR |= 1 << 24;
    
    // Repeatedly get the sample data until DONE bit
    unsigned int data;
    do {
        data = LPC_ADC->ADGDR;
    } while ((data & ((unsigned int)1 << 31)) == 0);
    
    // Stop conversion
    LPC_ADC->ADCR &= ~(1 << 24);
    
    return (data >> 6) & ADC_RANGE; // 10 bit
}

static inline void order(uint32_t *a, uint32_t *b) {
    if (*a > *b) {
        uint32_t t = *a;
        *a = *b;
        *b = t;
    }
}

static inline uint32_t adc_read_u32(analogin_t *obj) {
    uint32_t value;
#if ANALOGIN_MEDIAN_FILTER
    uint32_t v1 = adc_read(obj);
    uint32_t v2 = adc_read(obj);
    uint32_t v3 = adc_read(obj);
    order(&v1, &v2);
    order(&v2, &v3);
    order(&v1, &v2);
    value = v2;
#else
    value = adc_read(obj);
#endif
    return value;
}

uint16_t analogin_read_u16(analogin_t *obj) {
    uint32_t value = adc_read_u32(obj);
    
    return (value << 6) | ((value >> 4) & 0x003F); // 10 bit
}

float analogin_read(analogin_t *obj) {
    uint32_t value = adc_read_u32(obj);
    return (float)value * (1.0f / (float)ADC_RANGE);
}